Embedded Files
Introduction
The LEAPER-56 Universal Programmer is a pocket size universal programmer. It provides with 75MHz bandwidth and < ±2.5nS signal skew just in smart-phone size. The programming speed is much faster than the other universal programmers on the market in any time and any condition.
By letting your PC or laptop connect with LEAPER-56 Universal Programmer, it will perform your outstanding ability of development and debugging. You can easily have professional factory-level productivity. Nor Flash, Microcontroller, MCU, CPLD, FPGA, PLD, SRAM are all covered.
Features
Portable mini size. Without socket, only 136mm(L)* 90mm(W)* 20mm(H). You just need to connect with USB cable to use. No additional power supply.
Provide with DUT 75MHz bandwidth and < ±2.5nS signal skew. In addition to the high processing speed, you can verify whether the ICs processing frequency meets the specifications.
Via USB HUB, you can connect multiple LEAPER-56s to do gang programming. It makes development and mass production proficient.
Provide with DUT device pin checking and memory components ID verification. Ensure the best yield rate of processing.
LEAPER-56 Universal Programmer is most suitable in the mobile environment.
The best way to perform your professional capacity and working efficiency.
LEAPER-56 supports the latest operation system
Specification
Specification
Device power signal
Logic signal level: 1.5V~6.0V,10mV
IOL, IOH current: 10mA
Logic signal frequency: 75MHz (3-5V), 60MHz (2.5V), 45MHz (1.8V), 25MHz (1.5V)
Signal skew: <±2.5nS (3-5V)
Clock frequency: 0Hz ~ 75MHz
VDD, VIO level: 1.5V~6.5V,10mV
IDD, IIO frequency: 400mA
VPP, VHH level: 1.5V~15.5V,20mV
IPP, IHH frequency: 150mA
Power consumption: 4W
Pin drivers: 48 Pin Universal Pin Driver (Zero Inser ion Force)
DUT socket: DIP 48 ZIF
Dimension: 136(L) x 90(W) x 20(H) mm, Socket is not included
Weight: 282g
PC System Requirements
PC System Requirements
Operating System：Windows 10 / 8 / 7 / Vista / XP ( 32bits & 64bits )
Processor: Pentium 4 above
Memory: 2 GB RAM above
Hard disk: 500 MB above / buffer: 1GB above
Communication: USB 2.0 high speed only
USB powered: Connect the cable with 2 USB port (900mA above)
The software installation notice:
The software installation notice:
The LEAPER-56 software includes:
1. PC Software
2. Database patch
Please install the software first, then the database patch.
Supported Devices
Supported Devices
NOR FLASH, SPI, EPROM, EEPROM, MPU, MCU, CPLD, NV-RAM, etc.
Supported File Formats
Supported File Formats
Binary/Machine Code, Intel HEX,TEK HEX, Motorola HEX
Remarks
Remarks
Must use the USB cable from the standard package, and connect to the USB ports behind your PC. Besides please also connect it with 2 USB ports, or through the USB Hub (5V/1A).
When you need adapters to process the high-speed components, be sure to use good quality adapters. In order to have the best high-frequency process performance, the socket and DUT must keep good contact.
Standard Accessories
Standard Accessories
Main unait x 1
Y-USB cable x1
Optional Accessories
Optional Accessories
PLCC, SDIP, SOP, VSOP, SSOP, TSOP, TSSOP, QFP, PQFP, TQFP, VQFP, BGA, uBGA, SON, WSON, QFN (MLF)....adapters.
參考資料
參考資料
Page updated
Google Sites
Report abuse