Currently In stock
SCA Armored Combat Helms
This deeply weathered helm is 114 gauge steel with 12 gauge back slats. It has a full package of bronze castings, simulated hinges and leather trim for the cheek plates, and is equipped with rings for chinstrap mounting.
It is a medium with a 28" browband and a grill length of 7.5"
This eastern influenced helm is 14 gauge weathered steel with a brushed finish for the quarter panels. The welded stainless mail drape covers a 14g steel backplate that is well ventilated. The fittings are cast bronze and feature the first run of my newest finial which is pierced for plume mounting if desired. Chinstrap D-rings have been installed.
It is a medium with a browband measuring 28" and a facial length of 7.5".
This helm has a lightly weathered 12 gauge steel cap with a brushed finish. The leather drape covers a 14g steel lower barrel that is ventilated. The nasal is cast bronze and chinstrap D-rings have been installed.
It is a snug and fairly narrow medium with a browband measuring 28" and a facial length of 7".
This helm is 14g with a 12g tail fan, all in weathered steel with a blackened finish. It is rigged with D-rings for a chinstrap.
It is a small with a 27" browband and a grill length of 7.5"
This helm is constructed from 14 gauge steel and has a brushed finish. The brim is strengthened with welded bar stock and the facial grill is 12 gauge perforated steel. The drape is alternating ring riveted mail with a darkened finish. The helm has D-rings for chinstrap mounting.
It is a medium with a 28" browband and a facial length of 7.75"
The main frame and backplate of this helm are 14g brushed steel. It has weathered 14g steel for the cheekplates and infill panels. The nasal and finial are cast bronze. The brocade & leather drape covers a ventilated steel backplate, and it is rigged with D-rings for a chinstrap.
It is a small with a 27" browband and a grill length of 7.25".
This helm is constructed from 14g brushed steel. The nasal is cast bronze. The light brown leather drape covers a ventilated steel backplate, and it is rigged with D-rings for a chinstrap.
It is a snug and short medium with a 27.5" browband and a grill length of 7".
SCA Cut & Thrust helms
C&T Phrygian Spangen a
This helm is 16 gauge steel for the faceplate and frame with 18 gauge steel for the six infill panels. It has a weathered finish and the hand sewn leather drape covers a 3/16" mesh backplate. The nasal is cast bronze.
It is a long medium with a 27" brow band and a faceplate length of 8.5"
Historic Spangen 1b
This helm is built for historic use and has an 18g frame, 20g infill panels, and a 14g nasal. It has a weathered finish, leather trimmed cheekplates, and is fitted with an adjustable leather suspension system.
It is a medium best suited to a 23-24" brow measurement.