Sky Remote Codes

Problems with your sky remote?

To program your Sky remote control using the 4 digit code

1. Switch on the TV set

2. Press the TV button on the Sky Remote

3. Hold down the Select and Red buttons for 2-3 seconds until the LED blinks twice

4. Press the TV button on the Sky Remote again

5. Enter the 4 digit code for your make of TV (e.g. Samsung is 2076)

6. The LED should blink twice, if not recheck the 4 digit code used and go back to 1

7. Press the standby button on the Sky Remote (The TV should go to standby)

8. Press the Select button to store

If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful. This will scan the codes used for a particular make of TV.

Programming the Sky Remote control to view Sky on an RF channel

Most installations comprise of a Scart connection from the Sky receiver to the TV. This is normally activated by pressing the Sky button for viewing Sky. For installations where the use of a Scart lead is not possible the Sky button on the remote can be set to instruct the TV to go to channel 6 (Or any channel that Sky is normally viewed on) and switch on the Sky receiver.

1. Press the TV button on the Sky Remote

2. Hold down the Select and Green buttons for 2-3 seconds until the LED blinks twice

3. Enter the program number for the TV channel which Sky is normally viewed on

4. Press the Select button to store, the LED should blink twice

Now you only need press the Sky button to view Sky on your chosen TV channel.

Need a code for your Television that is not listed? Or do you have a code we could add? Let us know in our Sky Remote Codesthread here.

To nd your TV code click here. http://sky.uebv.com/

If your having problems with your sky remote not connecting to your sky box foll the instructions below.

For standard and Sky+ boxes

Press "TV"

Press "Yellow" an "Select" together - red led in remote should flash twice

Press "0" for standard box, "1" for Sky + box

Press "Select" - red led should flash twice

Press "Sky"

This method can also be used to switch remotes (Version 4 and later) to work on other boxes - e.g standard remote on Sky+ box. It also should not change the settings in the remote for the TV.