Reset Cisco Aironet Access Point Power Injectors

When the AP data/POE connection is swapped with another AP, the Power Injector must be reset. A reset may also be required if the AP goes down during a power outage.

Flashing orange status light on Cisco 1131G Wireless Access Point.

How to reset the Power Injector on Cisco WLAN Controller

1. Login to the Wireless Controller:

- https://IP-address-of-controller/

1. Click on Wireless Tab

1. Click on the MAC address of the Access Point under AP Name
2. Click on Advanced Tab
3. Under “Power Injector Selection” select “installed”
4. Click APPLY
5. Click on Monitor Tab. The AP should come back on-line.