Xventure
XVenture Solar Watch Instructions
To set the time:
• With the time displayed, press the Mode button (lower left) 3 times. The seconds should be blinking.
• Press the Reset button (lower right) to cycle through the time elements (seconds, minutes, hours, date, month, day)
• Press the Start button (upper right) to adjust the time element. The hour can be adjusted through AM/PM values and then through 24 hr values.
• Press the Mode button again to exit setting the time.
To set the alarm time:
• With the time displayed, press the Mode button twice. The hours should be blinking.
• Press the Reset button to cycle through hours and minutes. Press the Start button to adjust the hours or minutes.
To turn the alarm on and off:
• After the adjusting the alarm time, the alarm is turned on.
• With the time displayed, hold down the Reset button and press the Start button to toggle the alarm on and off.
To silence the alarm:
• Press the Start or Reset buttons.
To display the alarm time:
• With the time displayed, press the Reset button.
To turn the hourly chime on and off:
· Hold down the Reset button and press the Mode button. The Mode button will toggle the chime on and off.
· When the chime is on all the Days will be darkened. When the chime is off all the Days will be light.
To display the date:
• With the time displayed, press and hold the Start button.
To use the stopwatch:
• With the time displayed, press the Mode button once.
• Press the Start button to start and stop the stopwatch.
• Press the Reset button to set the time back to zero.
• With the stop watch running press the Reset button to view the "lap" time. Press Reset again to return to "total" time.
To view the display in the dark:
• Press the Light (upper left) button.
February 26, 2010