Makhsuda Juraeva and Jang Min Park*, Effects of nozzle geometry on internal flow characteristics of an air interlacing nozzle, Journal of Mechanical Science and Technology, accept, 2026
M. Faraz, Talat Rafiq and Jang Min Park*, Axisymmetric Rotating Flow over a Permeable Surface with Heat and Mass Transfer Effects: A comparative study, Case Studies in Thermal Engineering, Vol. 83, 108245, 2026
Makhsuda Juraeva, Jang Min Park*, Kukhee Lim and Eunho Kim, Failure assessment of RPV lower head penetration weld using finite element and crack model analyses, Nuclear Engineering and Technology, Vol. 58(10), 104455, 2026
Makhsuda Juraeva and Jang Min Park*, Computational analysis of air orifice to enhance air twist formation in twisting nozzles, Mechanical Engineering Journal, Vol. 13(2), 25-00342, 2026
Jang Min Park*, Diffuse-interface modeling of two-phase flows with a Boussinesq-Scriven interface, Computers and Fluids, Vol. 307, 106970, 2026
Thanh Tung Nguyen, Van Thanh Hoang* and Jang Min Park, A proposed model for predicting droplet breakup dynamics in microfluidic T-junction, Journal of Micromechanics and Microengineering, Vol. 35, 075005, 2025
M. Faraz and Jang Min Park*, Thermal and MHD behavior of CNT Maxwell nanofluid over a stretchable cylinder, Journal of Radiation Research and Applied Sciences, Vol. 18(2), 101326, 2025
Jang Min Park* and Kukhee Lim, Development of axisymmetric shell model for creep deformation analysis of reactor pressure vessel lower head, Nuclear Engineering and Technology, Vol. 57(2), 103220, 2025
Yao Gong, Lili Zou*, Jang Min Park**, Kai You, Xiang Yi, Bin Li, Plane-symmetric co-flow capillary for the generation of monodisperse droplets, Microfluidics and Nanofluidics, Vol. 28, 7, 2024
Abdul Hakeem Anwer, Mohd Shoeb*, Fouzia Mashkoor, Aleesha Ali, Sumairah Kareem, Mohd Zahid Ansari, Jang Min Park and Changyoon Jeong*, Simultaneous reduction of carbon dioxide and energy harvesting using RGO-based SiO2-TiO2 nanocomposite for supercapacitor and microbial electrosynthesis, Applied Catalysis B: Environmental, Vol. 339, 123091, 2023
Van Thanh Hoang*, Van Duong Le, Jang Min Park and Bich-Tram Truong-Le, Effect of entry geometry on droplet dynamics in contraction microchannel, International Journal of Multiphase Flow, Vol. 167, 104543, 2023
Jang Min Park* and Kukhee Lim, Diverging radial flow of a viscoplastic fluid in narrow gaps of varying thickness, Journal of Non-Newtonian Fluid Mechanics, Vol. 316, 105031, 2023
Wankun Liu and Jang Min Park*, Numerical study on the engulfing behavior between immiscible droplets in a confined shear flow, Chemical Engineering Science, Vol. 266, 118265, 2023
Jang Min Park and Kukhee Lim*, Multi-dimensional finite element analyses of OECD Lower Head Failure tests, Nuclear Engineering and Technology, Vol. 54(12), 4522-4533, 2022
Van-Duong Le, Van-Thanh Hoang, Quang-Bang Tao*, Lahouari Benabou, Ngoc-Hai Tran, Duc-Binh Luu and Jang Min Park**, Computational study on the clamping mechanism in the injection molding machine, The International Journal of Advanced Manufacturing Technology, Vol. 121, 7247–7261, 2022
Minh-Sang Tran*, Van-Thanh Hoang** and Jang-Min Park, The one/multi-objective optimization for tensile yield and impact strength responses of optical PC/PMMA blends, International Journal of Precision Engineering and Manufacturing, Vol. 23, 405-419, 2022
Wankun Liu and Jang Min Park*, Ternary modeling of the interaction between immiscible droplets in a confined shear flow, Physical Review Fluids, Vol. 7, 013604, 2022
Van Thanh Hoang, Wankun Liu and Jang Min Park*, Discussion on "Analysis of Bingham fluid radial flow in smooth fractures" [J Rock Mech Geotech Eng 12 (2020) 1112–1118], Journal of Rock Mechanics and Geotechnical Engineering, Vol. 13(4), 937-944, 2021
Jang Min Park*, Flow classification of radial and squeeze flows between parallel disks, Journal of Non-Newtonian Fluid Mechanics, Vol. 286, 104416, 2020
Jang Min Park*, Comment on "A revisitation of generalized Newtonian fluids" [J. Rheol. 64, 493-504 (2020)], Journal of Rheology, Vol. 64(6), 1497-1499, 2020
Yao Gong, Kyoung Je Cha and Jang Min Park*, Deformation characteristics and resistance distribution in thermoforming of printed electrical circuits for in-mold electronics application, The International Journal of Advanced Manufacturing Technology, Vol. 108(3), 749-758, 2020
Van Thanh Hoang and Jang Min Park*, A Taylor analogy model for droplet dynamics in planar extensional flow, Chemical Engineering Science, Vol. 204, 27-34, 2019
Yue Wu, Yao Gong, Kyoung Je Cha and Jang Min Park*, Effect of microstructures on the shrinkage of injection molding product, Journal of Mechanical Science and Technology, Vol. 33(3), 1357-1363, 2019
Wankun Liu, Woojin Kim and Jang Min Park*, Numerical study on the optimization of polymer extrusion process for a single-lumen micro catheter, Transactions of the Korean Society of Mechanical Engineers A, Vol. 42(12), 1059-1065, 2018
Jang Min Park*, Mathematical modeling and computational simulation of phase separation in ternary mixtures, Applied Mathematics and Computation, Vol. 30, 11-22, 2018
Van Thanh Hoang, Chan Byon, Jiseok Lim* and Jang Min Park**, Three-dimensional simulation of droplet dynamics in planar contraction microchannel, Chemical Engineering Science, Vol. 176, 59-65, 2018
Yao Gong, Young-Jin Baik, Chang Ping Li, Chan Byon, Jang Min Park* and Tae Jo Ko, Experimental and modeling investigation on machined surfaces of HDPE-MWCNT polymer nanocomposite, The International Journal of Advanced Manufacturing Technology, Vol. 88(1), 879-885, 2017
Yao Gong, Jang Min Park* and Jiseok Lim**, An interference-assisted thermal bonding method for the fabrication of thermoplastic microfluidic devices, Micromachines, Vol. 7(11), 211, 2016
Young-Jin Baik, Ich-Long Ngo, Jang Min Park and Chan Byon*, Generalized correlations for predicting optimal spacing of decaying heat sources in a conducting medium, Journal of Heat Transfer, Vol. 138, 091301, 2016
Jang Min Park* and Patrick D. Anderson, Diffuse-interface modeling of three-phase interactions, Applied Physics Letters, Vol. 108(19), 191604, 2016
Jang Min Park, Ook Joong Kim*, Seock Joon Kim and Yeon-Chul Shin, Heat transfer characteristics of circular and elliptic cylinders in cross flow, Advances in Mechanical Engineering, Vol. 7(11), 1687814015619553, 2015
Jang Min Park, Dong-Wook Oh and Jungho Lee*, Numerical analysis of thermal mixing in a swirler-embedded line-heater for flow assurance in subsea pipelines, Advances in Mechanical Engineering, Vol. 7(2), 739089, 2015
Im Doo Jung, Jang Min Park*, Tae Gon Kang, See Jo Kim and Seong Jin Park**, Magneto-rheological model for computational analysis of magnetic micro powder injection molding, Computational Materials Science, Vol. 100(A), 39-44, 2015
Taehoon Kim, Dong-Wook Oh, Kyu Hyung Do, Jang Min Park and Jungho Lee*, Effect of initial temperature of a cylindrical steel block on heat transfer characteristics of staggered array jets during water jet quenching, Heat Transfer Engineering, Vol. 36(12), 1037-1045, 2015
Jang Min Park, Seok Ho Yoon, Kong Hoon Lee and Chan Ho Song*, Numerical study of the inertia effect on flow distribution in micro-gap plate heat exchanger, Transactions of the Korean Society of Mechanical Engineers B, Vol. 38(11), 881-887, 2014
Jang Min Park*, Fabrication of various nano-structured nickel stamps using anodic aluminum oxide, Microsystem Technologies, Vol. 20, 2157-2163, 2014
Im Doo Jung, Jang Min Park, Ji-Hun Yu, Tae Gon Kang, See Jo Kim and Seong Jin Park*, Particle size effect on the magneto-rheological behavior of powder injection molding feedstock, Materials Characterization, Vol. 94, 19-25, 2014
Jang Min Park, Martien A. Hulsen and Patrick D. Anderson*, An extended finite element method for a diffuse-interface model, Journal of Computational and Applied Mathematics, Vol. 272, 25-40, 2014
Im Doo Jung, Sung Hun Kim, Seong Jin Park*, See Jo Kim, Tae Gon Kang and Jang Min Park, Rheological modeling of strontium ferrite feedstock for magnetic powder injection molding, Powder Technology, Vol. 262, 198-202, 2014
Kyoung Duck Seo, Jang Min Park, Hyeonsoo Jeong and Dong Sung Kim*, An experimental investigation of mixing of carbon nanotube/polymer composite in a batch-type screw mixer, Microsystem Technologies, Vol. 20(2), 243-250, 2014
Jang Min Park, Martien A. Hulsen and Patrick D. Anderson*, Numerical investigation of the effect of insoluble surfactant on drop formation in microfluidic device, The European Physical Journal Special Topics, Vol. 222, 199-210, 2013
Jang Min Park, Roberto Mauri and Patrick D. Anderson*, Phase separation of viscous ternary liquid mixtures, Chemical Engineering Science, Vol. 80, 270-278, 2012
Sung Hun Kim, See Jo Kim, Seong Jin Park*, Jun Ho Mun, Tae Gon Kang and Jang Min Park, Rheological behavior of magnetic powder mixtures for magnetic PIM, Korea-Australia Rheology Journal, Vol. 24(2), 121-127, 2012
Jang Min Park and Patrick D. Anderson*, A ternary model for double-emulsion formation in a capillary microfluidic device, Lab on a Chip, Vol. 12(15), 2672-2677, 2012
Jae-Yun Ho, Jang Min Park*, Tae Gon Kang and Seong Jin Park, Three-dimensional numerical analysis of injection-compression molding process, Polymer Engineering and Science, Vol. 52(4), 901-911, 2012
Jang Min Park, Seok Jae Jeong and Seong Jin Park*, Flake orientation in injection molding of pigmented thermoplastics, Journal of Manufacturing Science and Engineering, Vol. 134(1), 014501, 2012
Jang Min Park and Seong Jin Park*, Rheology and processing of suspensions with fiber, disk and magnetic particles, Korea-Australia Rheology Journal, Vol. 23(4), 219-226, 2011
Jang Min Park and Seong Jin Park*, Modeling and simulation of fiber orientation in injection molding of polymer composites, Mathematical Problems in Engineering, Vol. 2011, Article ID 105637, 14 pages, 2011
Jang Min Park, Tae Gon Kang* and Seong Jin Park, Numerical simulation of hot embossing filling stage using a viscoelastic constitutive model, Korea-Australia Rheology Journal, Vol. 23(3), 139-146, 2011
Jang Min Park, Seok Jae Jeong and Seong Jin Park*, Numerical prediction of flake orientation and surface color in injection molding of flake-pigmented thermoplastics, Polymer Composites, Vol. 32(8), 1297-1303, 2011
Jang Min Park* and Tai Hun Kwon, Irreversible thermodynamics based constitutive theory for fiber suspended polymeric liquids, Journal of Rheology, Vol. 55(3), 517-543, 2011
Bong-Kee Lee, Jang Min Park, Dong Sung Kim* and Tai Hun Kwon, A simple fabrication and integration technique of microlens for microfluidic lab-on-a-chip by overflow of UV resin through holes, Current Applied Physics, Vol. 11(3), 909-913, 2011
Jang Min Park* and Tai Hun Kwon, Nonisothermal transient filling simulation of fiber suspended viscoelastic liquid in a center-gated disk, Polymer Composites, Vol. 32(3), 427-437, 2011
Jang Min Park, Kyoung Duck Seo and Tai Hun Kwon*, A chaotic micromixer using obstruction-pairs, Journal of Micromechanics and Microengineering, Vol. 20, 015023, 2010
Jang Min Park, Nam Hyo Kim, Bong-Kee Lee, Kun-Hong Lee and Tai Hun Kwon*, Nickel stamp fabrication and hot embossing for mass-production of micro/nano combined structures using anodic aluminum oxide, Microsystem Technologies, Vol. 14, 1689-1694, 2008
Jang Min Park and Tai Hun Kwon*, Numerical characterization of three-dimensional serpentine micromixers, AIChE Journal, Vol. 54(8), 1999-2008, 2008
Jang Min Park, Dong Sung Kim, Tae Gon Kang and Tai Hun Kwon*, Improved serpentine laminating micromixer with enhanced local advection, Microfluidics and Nanofluidics, Vol. 4(6), 513-523, 2008