*Kang, J., Yadav, N., Ramadoss, S., Yeon, J. (2025. xx) “The VR Training Readiness Evaluation Model (VTREM): A Cross-Domain Model for Credibility Assessment in Immersive Simulations”, Information Visualization, Sage Publications Ltd., In Press (ISSN: 1473-8716; Q3, Science Citation Index Expanded, 2024 Impact Factor – 2.0). https://doi.org/10.1177/14738716251364382
Cho, J., Rodrigazo, S. A., Kim, C., Kim, Y., Kim, Y., *Yeon, J. (2025. 09) “Data-Driven Monitoring System for Ground Reinforcement Using Advanced Visualization Techniques”, Engineering Geology, Elsevier, Vol. 356, 108266. (ISSN: 0013-7952; Q1, Science Citation Index Expanded, 2024 Impact Factor – 8.4). https://doi.org/10.1016/j.enggeo.2025.108266
Kim, K., Lee, J., Lee, H. J., Rodrigazo, S. A., *Yeon, J. (2025. 08) “Evaluation of Polymer Resin Mortars for Surface Repair of Porous Asphalt Pavements”, Construction and Building Materials, Elsevier SCI Ltd., Vol. 489, 142329. (ISSN: 0950-0618; Q1, Science Citation Index Expanded, 2024 Impact Factor – 8). https://doi.org/10.1016/j.conbuildmat.2025.142329
Song, Y., Yeon, J. *Voyiadjis, G. (2025. 05) "Theoretical and Numerical Modeling of the Effect of Damage and Dynamic Strain aging on the Plastic Response of C45 Steel Alloys", International Journal of Damage Mechanics, Sage Publications Ltd., ICDM-4 Special Issue, 34(5) (ISSN: 1056-7895; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.9). https://doi.org/10.1177/10567895241235351
Godes, C. R., Lim, O., Rodrigazo, S. A., Kim, Y., Kim, Y., Lee, S., *Yeon, J. (2025. 04) “Advancing Geohazard Risk Assessment – A Digital Tool for Steep Slope Management”, Progress in Disaster Science, Elsevior, Vol. 26, 100418 (ISSN: 2590-0617; SCOPUS). https://doi.org/10.1016/j.pdisas.2025.100418
Rodrigazo, S. A., Cho, J., Godes, C. R., Kim, Y., Kim, Y., Lee, S., *Yeon, J. (2025. 03) “A Feasibility Study on Gradient Boosting Regressor for Sub-surface Sensor-Based Surface Instability Assessment”, Land, MDPI, 14(3), 565 (EISSN: 2073-445X; Q2, Social Sciences Citation Index, 2024 Impact Factor – 3.2). https://doi.org/10.3390/land14030565
Kim, K., Choi, Y., Lee, H. J., Rodrigazo, S. A., *Yeon, J. (2025. 02) “Enhanced Thermal Resistance and Mechanical Performance of 2 MMA-Based Pavement Coatings for Urban Heat Mitigation”, Polymers, MDPI, 17(5), 586 (EISSN: 2073-4360; Q1, Science Citation Index Expanded, 2024 Impact Factor – 4.9). https://doi.org/10.3390/polym17050586
Cho, J., Kim, C., Kim, J., Kim, H., *Yeon, J. (2025. 02) "Development of a Data Visualization Program for Changes in Measured Temperature, Humidity, and Pressure inside Concrete", KSCE Journal of Civil Engineering, Elsevier, 29(2), 100042 (ISSN: 1226-7988; Q3, Science Citation Index Expanded, 2024 Impact Factor – 2.0). https://doi.org/10.1016/j.kscej.2024.100042
Kim, K., Jun, C.S., Lee, H. J., Rodrigazo, S. A., *Yeon, J. (2025. 01) “Novel Inlay Methodology with Thermoplastic and Heating System for Durable Road Markings”, Polymers, MDPI, 17(3), 361 (EISSN: 2073-4360; Q1, Science Citation Index Expanded, 2024 Impact Factor – 4.9). https://doi.org/10.3390/polym17030361
Cho, J., Rodrigazo, S.A., Kim, H., Lee, S., *Park, C., *Yeon, J. (2025. 01) "Environmental Effects of Machine Vision-Driven Spall Repair Material Quantity Takeoff through Life Cycle Assessment Approach", Buildings, MDPI, 15(2), 162 (EISSN: 2075-5309; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.1). https://doi.org/10.3390/buildings15020162
Godes, C.R., Rodrigazo, S.A., Cho, J., Song, Y., *Yeon, J. (2024. 10) "Optimizing Evacuation Efficiency in Buildings: A BIM-Based Automated Approach to Sustainable Design", Sustainability, MDPI, 16(21), 9240 (EISSN: 2071-1050; Q2, Science Citation Index Expanded, Social Sciences Citation Index, 2024 Impact Factor – 3.3). https://doi.org/10.3390/su16219240
Oh, R.O., Kim, H.H., Choo, Y. J., Park, S.K., Rodrigazo, S.A., *Yeon, J. *Park, C. (2024. 10) "Evaluation of Delaminations and Defects in Concrete Deck using Non-Destructive Multi-Physical Scanning Technology", Sustainability, MDPI, 16(21), 9225 (EISSN: 2071-1050; Q2, Science Citation Index Expanded, Social Sciences Citation Index, 2024 Impact Factor – 3.3). https://doi.org/10.3390/su16219225
Kim, C., Cho, J., Kim, J., Song, Y., Kang, J., *Yeon, J. (2024. 05) "Spall Repair Patch Health Monitoring System using BIM and IoT", Buildings, MDPI, 14(6), 1589 (EISSN: 2075-5309; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.1). https://doi.org/10.3390/buildings14061589
Song, Y., Kiran, R., Shehu, L., *Yeon, J. (2024. 04) "The Effect of Dynamic Strain Aging on Strengthening of AA5754 Aluminum Alloys: Theoretical and Numerical Approaches", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Springer, Vol. 55, pp. 2374–2387 (ISSN: 1073-5623; Q2, Science Citation Index Expanded, 2024 Impact Factor – 2.5). https://doi.org/10.1007/s11661-024-07403-x
Cho, J., Kim, C., Song, Y., Kang, J., *Yeon, J. (2024. 04) “Lumped Record Management Method using BIM and Dynamo for Spalling Maintenance”, Automation in Construction, Elsevier, Vol. 160 (ISSN: 0926-5805; Q1, Science Citation Index Expanded, 2024 Impact Factor – 11.5). https://doi.org/10.1016/j.autcon.2024.105324
Cho, J., Kang, J., Song, Y., Lee, S., *Yeon, J. (2023. 12) "Innovative Imaging and Analysis Techniques for Quantifying Spalling Repair Materials in Concrete Pavements", Sustainability, MDPI, Vol.16(1), 112 (EISSN: 2071-1050; Q2, Science Citation Index Expanded, Social Sciences Citation Index, 2024 Impact Factor – 3.3). https://doi.org/10.3390/su16010112
Cho, J., Kim, C., Lim, K.J., Kim, J., Ji, B., *Yeon, J. (2023. 12) "Web-based Agricultural Infrastructure Digital Twin System integrated with GIS and BIM Concepts", Computers and Electronics in Agriculture, Elsevier, Vol.215, 108441 (ISSN: 0168-1699; Q1, Science Citation Index Expanded, 2024 Impact Factor – 8.9). https://doi.org/10.1016/j.compag.2023.108441
Kim, C., Song, Y., Cho, J., Kim, H., *Yeon, J. (2023. 11) "Influence of Temperature–Humidity Sensor Housing Depth on Concrete and Mortar Compressive Strength", Buildings, MDPI, Vol.13(11), 2762 (EISSN: 2075-5309; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.1). https://doi.org/10.3390/buildings13112762
Chaulagain, S., Choi, J., Kim, Y., Kim, S., Yeon, J., *Kim, Y., *Ji, B. (2023. 10) "A Comparative Analysis of Slope Failure Prediction Using a Statistical and Machine Learning Approach on Displacement Data: Introducing a Tailored Performance Metric", Buildings, MDPI, Vol.13(11), 2691 (EISSN: 2075-5309; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.1). https://doi.org/10.3390/buildings13112691
Ji, B., Kang, J., Kim, C., Kim, S., Song, Y., *Yeon, J. (2023. 08) "The Effect of Personal Characteristics on Spatial Perception in BIM-based Virtual Environments: Age, Gender, Education, and Gaming Experience", Buildings, MDPI, Vol.13(8), 2103 (EISSN: 2075-5309; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.1). https://doi.org/10.3390/buildings13082103
*Kang, J., Yadav, N., Ramadoss, S., Yeon, J. (2023. 08) "Reliability of Distance Estimation in Virtual Reality Space: A Quantitative Approach for Construction Management", Computers in Human Behavior, Elsevier, Vol. 144, 107773 (ISSN: 0747-5632; Q1, Social Science Citation Index, 2024 Impact Factor – 8.9). https://doi.org/10.1016/j.chb.2023.107773
Kim, C., Song, Y., Cho, J., Kang, J., *Yeon, J. (2023. 07) "Effect of Embedded Depth of Copper-Nickel-Plated Sensor Probes on Compressive Strength Development of Mortar", Sustainability, MDPI, Vol. 15(14), 10772 (EISSN: 2071-1050; Q2, Science Citation Index Expanded, Social Sciences Citation Index, 2024 Impact Factor – 3.3). https://doi.org/10.3390/su151410772
Song, Y., Kim, J.H., *Yeon, J. (2021. 12) “Dynamic Strain Aging in AA5182 Alloys at a Wide Range of Temperatures”, International Journal of Applied Mechanics, World Scientific Publ Co Pte Ltd, Vol. 13(10), 2150130 (ISSN: 1758-8251; Q2, Science Citation Index Expanded, 2024 Impact Factor – 2.6). https://doi.org/10.1142/S1758825121501301
Song, Y., Yeon, J., *Voyiadjis, G. Z. (2021. 11) “Constitutive Modeling and Numerical Simulations for Dynamic Strain Aging in MMFX Steel at Elevated Temperatures”, International Journal of Mechanical Sciences, Pergamon-Elsevier Science Ltd, Vol. 210(15), 106743 (ISSN: 0020-7403; Q1, Science Citation Index Expanded, 2024 Impact Factor – 9.4). https://doi.org/10.1016/j.ijmecsci.2021.106743
Yeon, J., *Rew, Y., Choi, K., Kang, J. (2020. 02) “Environmental Effects of Accelerated Pavement Repair Using 3D Printing: Life Cycle Assessment Approach”, Journal of Management in Engineering, ASCE-American Society of Civil Engineers, Vol. 36(3) (ISSN: 0742-597X; Q1, Science Citation Index Expanded, 2024 Impact Factor – 7.0). https://doi.org/10.1061/(ASCE)ME.1943-5479.0000752
*Yeon, J. (2020. 02) “Deformability of Bisphenol A-Type Epoxy Resin-Based Polymer Concrete with Different Hardeners and Fillers”, Applied Sciences-Basel, MDPI, Vol. 10(4), 1336 (EISSN: 2076-3417; Q2, Science Citation Index Expanded, 2024 Impact Factor – 2.5). https://doi.org/10.3390/app10041336
Yeon, J.H., Lee, H. J., *Yeon, J. (2020. 02) “Deformability in Unsaturated Polyester Resin-Based Concrete: Effects of the Concentration of Shrinkage-Reducing Agent and Type of Filler”, Materials, MDPI, Vol. 13(3), 727. (EISSN: 1996-1944; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.2). https://doi.org/10.3390/ma13030727
Song, Y., *Yeon, J., Na, B. (2019. 12) “Numerical Simulations of the Hall-Petch Relationship in Aluminium using Gradient-Enhanced Plasticity Model”, Advances in Civil Engineering, Hindawi Ltd., Article ID 7366581 (ISSN: 1687-8086; Q3, Science Citation Index Expanded, 2024 Impact Factor – 1.6). https://doi.org/10.1155/2019/7356581
Urgessa, G., Yun, K., Yeon, J., *Yeon, J.H. (2019. 11) “Thermal Responses of Concrete Slabs Containing Microencapsulated Low-Transition Temperature Phase Change Materials Exposed to Realistic Climate Conditions”, Cement & Concrete Composites, Elsevier SCI Ltd., Vol. 104, 103391 (ISSN: 0958-9465; Q1, Science Citation Index Expanded, 2024 Impact Factor – 13.1). https://doi.org/10.1016/j.cemconcomp.2019.103391
*Yeon, J. (2019. 09) “Short-Term Deformability of Three-Dimensional Printable EVA-Modified Cementitious Mortars”, Applied Sciences-Basel, MDPI, Vol. 10(4), 1336 (EISSN: 2076-3417; Q2, Science Citation Index Expanded, 2024 Impact Factor – 2.5). https://doi.org/10.3390/app9194184
Kim, K., *Yeon, J., Lee, H. J., Yeon, J.H. (2019. 08) “Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction”, Applied Sciences-Basel, MDPI, Vol. 10(4), 1336 (EISSN: 2076-3417; Q2, Science Citation Index Expanded, 2024 Impact Factor – 2.5). https://doi.org/10.3390/app9163386
Yeon, K., Kim, K., *Yeon, J., Lee, H. J. (2019. 08) “Compressive and Flexural Strengths of EVA-Modified Mortars for 3D Additive Construction”, Materials, MDPI, Vol. 13(3), 727. (EISSN: 1996-1944; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.2). https://doi.org/10.3390/ma12162600
Kim, K., *Yeon, J., Lee, H. J., Yeon, K. (2019. 08) “Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials”, Polymers, MDPI, Vol.11(8), 1321 (EISSN: 2073-4360; Q1, Science Citation Index Expanded, 2024 Impact Factor – 4.9). https://doi.org/10.3390/polym11081321
Kim, K., *Yeon, J., Lee, H. J., Yeon, K. (2019. 08) “Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3-Dimensional Concrete Printing”, Sustainability, MDPI, Vol. 15(14), 10772 (EISSN: 2071-1050; Q2, Science Citation Index Expanded, Social Sciences Citation Index, 2024 Impact Factor – 3.3). https://doi.org/10.3390/su11154164
*Yeon, J., Song, Y., Kim, K., Kang, J. (2019. 07) “Effects of Epoxy Adhesive Layer Thickness on Bond Strength of Joints in Concrete Structures”, Materials, MDPI, Vol. 13(3), 727. (EISSN: 1996-1944; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.2). https://doi.org/10.3390/ma12152396
Yeon, K., Kim, K., *Yeon, J., Lee, H. J. (2019. 07) “Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion”, Materials, MDPI, Vol. 13(3), 727. (EISSN: 1996-1944; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.2). https://doi.org/10.3390/ma12142292
*Yeon, J., Kang, J., Yan, W. (2018. 05) “Spall Damage Repair using 3D Printing Technology”, Automation in Construction, Elsevier, Vol. 89 266-274 (ISSN: 0926-5805; Q1, Science Citation Index Expanded, 2024 Impact Factor – 11.5). https://doi.org/10.1016/j.autcon.2018.02.003
Jin, N., *Yeon, J., Min, S., Yeon, K. (2018. 01) “Strength Developments and Deformation Characteristics of MMA-Modified Vinyl Ester Polymer Concrete”, International Journal of Concrete Structures and Materials, Springer, Vol. 12(4) 65-76. (ISSN: 1976-0485; Q2, Science Citation Index Expanded, 2024 Impact Factor – 3.6). https://doi.org/10.1186/s40069-018-0232-0
Jin, N., *Yeon, J., Seung, I., Yeon, K. (2017 .12) “Effects of Curing Temperature and Hardener Type on the Mechanical Properties of Bisphenol F-Type Epoxy Resin Concrete”, Construction and Building Materials, Elsevier SCI Ltd., Vol. 156, 933-943. (ISSN: 0950-0618; Q1, Science Citation Index Expanded, 2024 Impact Factor – 8). https://doi.org/10.1016/j.conbuildmat.2017.09.053
Jin, N., Seung, I., Choi, Y., *Yeon, J. (2017. 10) “Prediction of Early-Age Compressive Strength of Epoxy Resin Concrete using the Maturity Method”, Construction and Building Materials, Elsevier SCI Ltd., Vol. 156, 933-943. (ISSN: 0950-0618; Q1, Science Citation Index Expanded, 2024 Impact Factor – 8). https://doi.org/10.1016/j.conbuildmat.2017.07.066
Jin, N., Yeon, K., Min, S., *Yeon, J. (2017. 08) “Using the Maturity Method in Predicting the Compressive Strength of Vinyl Ester Polymer Concrete at an Early Age”, Advances in Materials Science and Engineering, Hindawi Ltd., Vol. 2017, 4546732, 12 pages. (ISSN: 1687-8434; Q4, Science Citation Index Expanded, 2021 Impact Factor – 2.098). https://doi.org/10.1155/2017/4546732
Cho, J., Godes, C.R., Rodrigazo, S.A., Kim, Y., Lee, S., Kim, Y., *Yeon, J. (2025. 01) “BIM-based Status Visualization for Embedded Rock Bolts on Tunnel Reinforcements”, Journal of Korean Tunnelling and Underground Space Association, Korean Tunnelling and Underground Space Association, 27(1), pp. 1-11 (ISSN: 2233-8292, Korea Citation Index, 2023 Impact Factor – 0.42). https://doi.org/10.9711/KTAJ.2025.27.1.001
Godes, C., Rodrigazo, S.A., Cho, J., Kim, Y., Lee, S., Kim, Y., *Yeon, J. (2024. 12) “Identifying Emerging Risks in Ground Reinforcement Systems and Sensor Integration using Text Mining”, Journal of Agricultural, Life and Environmental Sciences, Agriculture and Life Sciences Research Institute, 36(4), pp. 297-331 (ISSN: 2233-8322, Korea Citation Index, 2023 Impact Factor – 0.59). https://doi.org/10.22698/jales.20240024
Kang, S., Kang, S., *Yeon, J. (2024. 12) “BIM-Based Methods for Road Maintenance Management through Embedded Sensor and Road Damage Detection”, Journal of KIBIM, Korean Institute of Building Information Modeling, 14(4), pp. 35-44 (ISSN: 2288-1697, Korea Citation Index, 2023 Impact Factor – 0.7). https://doi.org/10.13161/kibim.2024.14.4.035
Lee, H., Shin, M., Lim, K.J., Shin, Y., Jung, Y., Yeon, J., Kim, J., Ji, B., *Park.Y. (2024. 04) “Development and Application of a QGIS-based Module to Build Inputs for SWMM using the Geographic Information System Data of a Submerged Paddy Field Area”, Journal of Agricultural, Life and Environmental Sciences, Agriculture and Life Sciences Research Institute, Vol. 36(1), pp. 12-22 (ISSN: 2233-8322, Korea Citation Index, 2023 Impact Factor – 0.59). https://doi.org/10.22698/jales.20240002
Ji, B., Cho, J., Kim, Y.S., Yeon, J., *Choi, J. (2022. 12) “Prediction of Slope Failure based on LSTM Autoencoder”, Journal of Agricultural, Life and Environmental Sciences, Agriculture and Life Sciences Research Institute, Vol.34(3), pp-345-353, (ISSN: 2233-8322, Korea Citation Index, 2023 Impact Factor – 0.59). https://doi.org/10.22698/jales.20220034
Kim, C., Jang, Y., Kim, J., Song, Y., Ji, B., *Yeon, J. (2022. 12) “Feasibility Study of a Virtual Environment using BIM for Reviewing the Agricultural Infrastructure Design”, Journal of Agricultural, Life and Environmental Sciences, Agriculture and Life Sciences Research Institute, Vol. 34(3), pp. 275-286 (ISSN: 2233-8322, Korea Citation Index, 2023 Impact Factor – 0.59). https://doi.org/10.22698/jales.20220028
Yeon, J., Cho, J., Rodrigazo, S. A., Lee, J. (2025) “Advancing Infrastructure Monitoring through Parametric BIM Integration”, CECAR10: The Civil Engineering Conference in the Asian Region, Jeju, South Korea, Oct. 21-24.
Cho, J., Rodrigazo, S., J. Lee, I. You, J. Yu, I., Yeon, J. (2025) “BIM-based Visualization and Monitoring Approach for Assessing Status of Embedded Rock Bolts”, KIBIM 2025: Korea Institute of Building Information Modeling Annual Conference, Seoul, South Korea, May. 22.
Cho, J., Rodrigazo, S. A., Choi, K., Yeon, J. (2025) “BIM-based Asphalt Pavement Roads Pothole Repair Maintenance Record Management ", KSRE 2025: Korean Society of Road Engineers, Seoul, South Korea, Mar. 14.
Cho, J., Godes, C.R., Rodrigazo, S. A., Yeon, J. (2024) “BIM-based Agricultural Social Infrastructure Sensor Information Management", KSAE 2024: The Korean Society of Agricultural Engineering, Danyang, South Korea, Oct. 31-Nov.1.
Godes, C.R., Rodrigazo, S. A., Cho, J., Yeon, J. (2024) “Leveraging BIM and Simulation for a Data-driven Approach to Evacuation Efficiency", KSAE 2024: The Korean Society of Agricultural Engineering, Danyang, South Korea, Oct. 31-Nov.1.
Rodrigazo, S. A., Cho, J., Godes, C.R., Yeon, J. (2024) “Leveraging BIM and Simulation for a Data-driven Approach to Evacuation Efficiency", KSAE 2024: The Korean Society of Agricultural Engineering, Danyang, South Korea, Oct. 31-Nov.1.
Yeon, J., Song, Y. (2024) "Gradient-Enhanced Plasticity Theory for Size Effects and Mesh-Independent Numerical Results", WFC2024: World Foundry Congress, Deyang, Sichuan, China, Oct. 25-30.
Kang, J., Yadav, N., Ramadoss, S., Yeon, J. (2024) “Navigating Realities: Assessing Egocentric Distance Perception in Virtual Environments for Construction Applications”, IV2024: 28th International Conference Information Visualisation, Coimbra, Portugal, Jul. 23-26.
Cho, J., Godes, C., Rodrigazo, S., Yeon, J. (2024) “BIM-based Data Visualization for Condition Monitoring of Rockbolt”, KIBIM 2024: Korea Institute of Building Information Modeling Annual Conference, Suwon, South Korea, May. 24.
Kang, S., Cho, J., Rodrigazo, S., Yeon, J. (2024) “Road Maintenance and Management Plan through BIM-based Road Damage Location Visualization”, KIBIM 2024: Korea Institute of Building Information Modeling Annual Conference, Suwon, South Korea, May. 24.
Kang, S., Cho, J., Godes, C., Yeon, J. (2024) “BIM-based Management of Embedded Sensor Locations in Concrete Pavements”, KIBIM 2024: Korea Institute of Building Information Modeling Annual Conference, Suwon, South Korea, May. 24.
Rodrigazo, S., Cho, J., Godes, C., Yeon, J. (2024) “Exploring the Convergence of BIM and 3D Printing Technologies in Construction Practices: A Literature Review”, KIBIM 2024: Korea Institute of Building Information Modeling Annual Conference, Suwon, South Korea, May. 24.
Godes, C., Lim, O., Kim, Y., Ji, B., Yeon, J. (2023) “Analyzing Textual Data for Determining Landslide Risk Factors in South Korea”, PAWEES 2023 Fall: International Society of Paddy and Water Environment Engineering, Busan, South Korea, Oct. 23–25. (Outstanding Paper Award)
Kim, C., Song, Y., Cho, J., Yeon, J. (2023) “Practicality Validation of Digital Twin Concept applied Concrete Repair Patch Monitoring System”, KSCE 2023 Fall: Korean Society of Civil Engineers 2023 Convention Conference & Civil Expo, Yeosu, South Korea, Oct. 18–20. (Best Paper Award)
Cho, J., Kim, C., Song, Y., Joh, Y., Yeon, J. (2023) “Spalling Detection on the Concrete Pavement using the Concepts of Digital Twin”, KSCE 2023 Fall: Korean Society of Civil Engineers 2023 Convention Conference & Civil Expo, Yeosu, South Korea, Oct. 18–20. (Best Paper Award)
Godes, C., Lim, O., Kim, Y., Ji, B., Yeon, J. (2023) “Unveiling Key Factors for Landslide Risk Assessment Tool using Text Analytics”, KSCE 2023 Fall: Korean Society of Civil Engineers 2023 Convention Conference & Civil Expo, Yeosu, South Korea, Oct. 18–20.
Kim, C., Cho, J., Song, Y., Yeon, J. (2023) “Development of A Digital Twin-based Monitoring System for Agricultural Infrastructure using Parametric BIM", KSAE 2023: The Korean Society of Agricultural Engineering, Tongyeong, South Korea, Oct. 5-6. (Best Paper Award)
Cho, J., Kim, C., Song, Y., Joh, Y., Yeon, J. (2023) “Deep Learning-based Determination of the Amount of Spalling Repair Material in Agricultural Infrastructure”, KSAE 2023: The Korean Society of Agricultural Engineering, Tongyeong, South Korea, Oct. 5-6.
Cho, J., Kim, C., Godes, C., Lim, K.J., Yeon, J., Lim, K. J. (2023) “Digital Twin based Agricultural Infrastructure Information Management”, KSAE 2023: The Korean Society of Agricultural Engineering, Tongyeong, South Korea, Oct. 5-6.
Godes, C., Lim, O., Kim, Y., Ji, B., Yeon, J. (2023) “Exploring Landslide Risk Factors through Text Mining Analytics for Enhanced Risk Assessment”, KSAE 2023: The Korean Society of Agricultural Engineering, Tongyeong, South Korea, Oct. 5-6.
Kim, C., Cho, J., Yeon, J. (2023) “Development of the BIM-IoT Integrated System to Identify the Cause of Re-Damage of Spall Repair Patch on Concrete Pavement”, KIBIM 2023: Korea Institute of Building Information Modeling Annual Conference, Seoul, South Korea, Jun. 9.
Cho. J., Kim, C., Godes, C. R., Yeon, J. (2023) “BIM-Based Spall Repair Maintenance Record Management”, KIBIM 2023: Korea Institute of Building Information Modeling Annual Conference, Seoul, South Korea, Jun. 9.
Song. Y., Yeon, J., Voyiadjis, G. Z. (2023) “Theoretical and Numerical Study of Dynamic Strain Aging in Body-Centered Cubic Steel Alloys”, ICDM4: Fourth International Conference on Damage Mechanics, Baton Rouge, Louisiana, USA, May 15-18. (Link)
Kim, C., Jang, Y., Cho, J., Jung, H. J., Ji, B., Yeon, J. (2022) “Effect of Concrete Sensor Probe Placement to Compressive Strength of Concrete”, KCI 2022: Korea Concrete Institute Conference, Jeju, South Korea, Nov. 2-4.
Jang, Y., Kim, C., Kim, H., Kim, N., Song, Y., Yeon, J. (2022) “Development of Automatic Determination for Spall Damage Area on Concrete Pavement based on Deep Learning Method”, KCI 2022: Korea Concrete Institute Conference, Jeju, South Korea, Nov. 2-4.
Kim, C., Jang, Y., Ji, B., Yeon, J., Song, Y., Kang, J. (2022) “Updating Multi-Monitor Synchronize App for Reviewing Design Created by BIM”, KSCE 2022 Fall: Korean Society of Civil Engineers 2022 Convention Conference & Civil Expo, Busan, South Korea, Oct. 19–21.
Kim, C., Jang, Y., Cho, J. Ji, B., Yeon, J., Song, Y. (2022) “Re-Damage Cause Identification of Partial-Depth Damage on Concrete Pavement using Updated Digital Twin System”, KSCE 2022 Fall: Korean Society of Civil Engineers 2022 Convention Conference & Civil Expo, Busan, South Korea, Oct. 19–21.
Ji, B., Lim, K. J., Kim, J., Yeon, J. (2022) "Water Level Data Quality Management Framework using Denoising Autoencoder", KSAE 2022: The Korean Society of Agricultural Engineering, Daegu, South Korea, Oct. 13-14.
Jang, Y., Kim, C., Cho, J., Ji, B., Yeon, J., Lim, K. J. (2022) “Digital Map Visualization on the GIS-Based Digital Twin Platform”, KSAE 2022: The Korean Society of Agricultural Engineering, Daegu, South Korea, Oct. 13-14.
Kim, C., Jang, Y., Cho, J., Ji, B., Yeon, J., Song, Y., Kang, J. (2022) “Agricultural Infrastructure Health Inspection using Multi-Display System”, KSAE 2022: The Korean Society of Agricultural Engineering, Daegu, South Korea, Oct. 13-14.
Choi, J., Kim, Y. S., Yeon, J., Ji, B. (2022) "Machine Learning-based Slope Stability Assessment Framework", 2022 Joint Conference of KGES and KSDS: Korean Geo-Environmental Society, Jeju, South Korea, Sep. 15.
Yeon, J., Kim, J., Kang, J. (2021) “Digital Twin Infrastructure in the Agricultural Engineering Field using BIM and Immersive Virtual Environment”, KSAE 2021: The Korean Society of Agricultural Engineering, Jindo, South Korea, Nov. 4-5.
Kim, J., Yeon, J., Lim, K.J. (2021) “Digital Twin using BIM and GIS for Agricultural Infrastructure: Opportunities and Challenges”, KSAE 2021: The Korean Society of Agricultural Engineering, Jindo, South Korea, Nov. 4-5. (Best Paper Award)
Kim, J., Yeon, J., Lim, K.J., Yang, D. (2021) “Crack Detection in Agricultural Infrastructure using an Ultra-High-Resolution Camera and Drone”, KSCE 2021 Fall: Korean Society of Civil Engineers 2021 Convention Conference & Civil Expo, Gwangju, South Korea, Oct. 20–22. (Special Recognition Award)
Kim, J., Yeon, J., Kang, J. (2021) “Real-Time Monitoring Prototype for Digital Twin Infrastructure”, KSCE 2021 Fall: Korean Society of Civil Engineers 2021 Convention Conference & Civil Expo, Gwangju, South Korea, Oct. 20–22.
Yeon, J. (2021) “Automated Construction”, KEC Conference 2021: Kantipur Engineering College 2021 3rd International Conference on Engineering and Technology, Online, Kathmandu, Nepal, Apr. 18. (Guest Speaker)
Kang, J., Yeon, J. (2019) “Teaching How to read 2D Drawings using Virtual Construction”, EDULEARN 19: 11th International Conference on Education and New Learning Technologies, Palma, Spain, June 30-July 2. https://doi.org/10.21125/edulearn.2019.1881
Yeon, J., Czarny, M., Walewski, J., Kang, J. (2019) “Conceptual Big Data Case Study to Identifying Risks of New Nuclear Technologies”, ISEC 2019: 10th International Structural Engineering and Construction, Chicago, Illinois, USA, May 20-25. Article ID-RAD-11. https://doi.org/10.14455/ISEC.res.2019.49
Aydin, B., Yeon, J., Oh. I. (2019) “A Pilot Study of UAVs in the Construction Sector: Knowledge, Attitudes, and Practice”, IISE 2019: The Institute of Industrial and Systems Engineers Annual Conference & Expo, Orlando, Florida, USA, May 18-21.
Czarny, M., Yeon, J., Oh, I. (2018) “Content Analysis Approach: Infrastructure Construction Risk Identification using the Hurricanes Harvey and Katrina Disasters”, Texas A&M System 2018: 15th Annual Pathways Research Symposium, Canyon, Texas, USA, November 1-2. (Poster Presentation)
Yeon, J., Rew, Y., Kang, J., Choi, K. (2018) “Life-Cycle Assessment based Feasibility Study of Spall Damage Rehabilitation using 3D Printing Technology”, ASC 2018: 54th International Conference Associated Schools of Construction, Minneapolis, Minnesota, USA, April 18-21.
Yeon, K., Kim, K., Yeon, J. (2018) “Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing Material”, ICPIC 2018: 16th International Congress on Polymers in Concrete, Washington D.C., USA, April 29-May 1.
Yeon, J., Kang, J. (2017) “Spall Repair using a 3D Printer and Epoxy Resin Adhesive”, 9th International Structural Engineering and Construction, ISEC 2017: Proceedings of the Ninth International Structural Engineering and Construction Conference, Valencia, Spain, July 24-29. Article ID I-16. https://doi.org/10.14455/ISEC.res.2017.213
Yeon, J., Kang, J. (2017) “Rapid Spall Damage Repair using 3D Printer”, MAIREINFRA 1: International Conference on Maintenance and Rehabilitation of Constructed Infrastructure Facilities, Seoul, South Korea, Jul. 19–21.
Yeon, J., Kang, J. (2017) “Spall Damage Repair using 3D Printers: Opportunities and Challenges”, CITC 2017 The Ninth International Conference on Construction in the 21st Century, Dubai, United Arab Emirates, Mar. 5–7.
Yeon, J., Kang, J. (2017) “Rapid Spall Rehabilitation using 3D Printing Technology”, ASC 2017: 53rd International Conference Associated Schools of Construction, Seattle, Washington, USA, April 5-8. (Poster Presentation)
Kang, J, Yeon, J., Kandregula, S. (2015) “Fabrication of BIM CAVE 2: Challenges in Handling 9 Screen Walls”, ISARC 2015: 32nd International Symposium on Automation and Robotics in Construction and Mining, Oulu, Finland, Jun. 15–18. https://doi.org/10.22260/ISARC2015/0040
Yeon, J., Walewski, J., Kim, A. (2015) “International Project Risk Assessment (IPRA) Tool Compatibility Test for the International Nuclear Power Plant Construction”, ASC 2015: 51st International Conference Associated Schools of Construction, College Station, Texas, USA, Apr. 22–25.
Yeon, K., Kim, K., Kim, C., Yeon, J. (2015) “Coefficient of Thermal Expansion of Polymer Concrete with Different Polymeric Binders”, ICPIC 2015: 15th International Congress on Polymers in Concrete, Singapore, Oct 19-21, 2015. https://doi.org/10.4028/www.scientific.net/AMR.1129.139
Yeon, K., Kim, K., Kim, C., Yeon, J. (2015) “Comparative Study on the Elastic Modulus of Polymer Concrete”, ICPIC 2015: 15th International Congress on Polymers in Concrete, Singapore, Oct 19-21, 2015. https://doi.org/10.4028/www.scientific.net/AMR.1129.145
Walewski, J., Anderson, S., Yeon, J., Kim, A. (2013) “Risk Framework for the Next Generation Nuclear Power Plant Construction”, ICCEPM 2013: 5th International Conference on Construction Engineering and Project Management, Anaheim, California, USA, Jan 9–11.
Yeon, J., Noh, M., Park, T. (2007) “Experimental Analysis for Reinforced Concrete Deck Bonded with Steel Plate”, KCI 2007: Korea Concrete Institute Conference, Suwon, South Korea, Nov 1–3.
Yeon, J., Noh, M., Park, T. (2007) “Numerical Analysis for Novel-Type Steel-Concrete Composite Deck”, KSCE 2007: Korean Society of Civil Engineering Conference, Daegu, South Korea, Oct 10-12.
“Electronic Apparatus and Controlling Method Thereof for Spall Damage and Maintenance History Management of Concrete Pavement using 3D Modeling”, Application No. 10-202300215595, Korean Intellectual Property Office (KIPO), September 20, 2023. (Pending for Registration)
“Electronic Apparatus for Identifying the Cause of Re-Damage of Concrete Based on Digital Twin, and Its System”, Application No. 10-2023-0050751, Korean Intellectual Property Office (KIPO), April 18, 2023.
“System for Measuring Damaged Paved Road and Method Thereof”, Registration No. 10-2570313, Korean Intellectual Property Office (KIPO), December 23, 2022. (Registered)
“Spall Repair Method using 3D Printing Technology for a Concrete Pavement”, Registration No. 10-1706626, Korean Intellectual Property Office (KIPO), February 8, 2017. (Registered) https://doi.org/10.8080/1020160099892