By ordering you agree to the 'Technical Conditions of Use'                                                                                                                                                        (at the bottom of the page) and a delivery time of 30-60 days





The ‘Interface 1bis’ is the only ZX Spectrum (48,128,+2,+3) expansion device that features the combined functionality of

- Local storage, of up to 8 GB, subdivided in logical drives of 32 MB, on one micro SD card.

- Remote storage, of unlimited size, with long filename support, on a server machine, connected via a full-speed USB port.

- Non-volatile 128 KB RAM drive, for application that need to store data frequently and fast.

- Kempston joystick port.

- PS/2 mouse port, producing Kempston mouse or Kempston joystick output. 

  Following devices are also supported by the operating system and are automatically identified, when attached to the mouse connector:

    PS/2 keyboard

    Asynchronous serial communication cable, with or without a RS232 trans-receiver

    Serial printer, through a RS232 trans-receiver

    Parallel printer, through a serial to parallel adaptor 

    'EAR' cable for rendering tape files as audio signal

- Ethernet connectivity, by means of an optional, third party, add-on module.

- Wi-Fi connectivity, by means of an optional plug-in daughter board.

- Maximum software compatibility to the original 'ZX Interface 1' of Sinclair Research Ltd.

- Enhanced 'Extended BASIC' with comprehensive random-access file handling capabilities and full emulator (.SCR, .TAP and .Z80) files support. Files in .TZX format can be loaded either directly, if they contain only standard speed blocks, or otherwise, using the built-in 'tape player' and the 'EAR' cable.

- Integrated Game Browser and File Manager, with mouse and joystick control, being able to access besides the on-board SD card and a server PC, connected to the USB port, up to seven networked 'stations', which can be PCs or 'Interface 1bis' units, over the Internet, as well as the games und utilities archive of the 'Word of Spectrum' and sites.

    The navigation functions include jumping to a given display page as well as advanced search facilities.

    When a game is downloaded from the 'Word of Spectrum' archive, the associated screenshot, info and POKE files are also retrieved and transparently linked to the relevant game. The POKEs management functions allow the selective enabling of 'trainers', that are automatically applied when the corresponding game is launched.

    Both 48k and 128k snapshots can be created without interrupting the game, just by pushing the interface's button. The application manages snapshots transparently to the user, maintaining always two different copies in order to allow both restarting the game from the last 'good' situation, in case of unsatisfactory progress, or securing the attained progress.

    The application can perform the full range of file management functions, including complex ones, like moving entire directory trees, between any 'locations', be they 'Interface 1bis' units or PC servers, anywhere on the internet.


    The key to its versatility is the distinctive architecture of the IF1bis, which offloads all peripheral I/O operations onto a microcontroller, connected directly to the system’s data bus. This simplifies the design to a great extent and in conjunction with a rationalized memory configuration, requiring just one 32KB non-volatile SRAM chip, adds considerable benefits like:

- Small PCB size, of under 0.5dm2, allowing a

- Zero desk foot-print, due to vertical mounting.

- Simple, two-layer, PCB layout with very short tracks, for reduced noise.

- Low power consumption: at under 75mA, the lowest among comparable devices

- Low bus load: unequalled at only 0.7µA data bus leakage and only 0.5µA plus 1 (one) standard CMOS load on the other lines.

- Improved peripheral device handling, as the microcontroller, with its multiple hardware timers and complex interrupt logic, is specialized and better equipped for this task than the ZX Spectrum’s CPU.

- Faster transfer between local and remote storage as it is performed directly by the microcontroller, via its USB and SPI ports, bypassing the ZX Spectrum.

- Simplified operating system, needing only one device driver: for the ‘Parallel Slave Port’ of the microcontroller, which in turn handles all low level peripheral control operations.

The IF1bis has certain special features, not encountered on comparable devices, as no compromise on robustness was made in the process of optimizing the performance / cost ratio:

- The non-volatile SRAM is protected by an adjustable, high precision, voltage supervisor IC.

- The control push-button is de-bounced and multiplexed using a dedicated microcontroller, which generates clean, digitally timed, RESET and NMI signals.

- The /ROMCS line is driven not through transistors, but a Low-Voltage CMOS buffer, to ensure fail-safe memory paging.

And last, but not least:

- Unlike most ZX Spectrum add-ons, the IF1bis does not perform hardware trapping and can therefore function even if the host machine's CPU has a faulty /M1 line.

- The IF1bis does not rely upon the host machine's CLK line, which on some ZX Spectrum models is unusable.


    Operating system

The ‘Interface 1bis’, as the name intends to suggest, is 100% software (backward-) compatible to the ZX Interface 1’ of Sinclair Research, in respect of ‘Microdrive’ storage operations, as well as RS232 and ZX Network communication, both at BASIC command and ‘hook code’ level, yet not in 128k BASIC mode. 


All file handling operations can equally be performed on any of the two implemented file systems:

- block device, for a SD card (device "M") or the RAM drive (device "R")

- file device, for a PC server (device "V"),

either local or remote, over an IP network.

The main enhancements to the ‘extended BASIC’ of the original ‘ZX Interface 1’ are:

- The file size limit is 16 MB.

- Sequential access is not restricted to ‘PRINT’ files.

- Sequential access ‘M-channels’ can be selectively opened for input or output.

- Data in memory can be read, written or verified, through direct random access, to (or from) a specified position in a file, of any type, without the need to OPEN it.

- Random access ‘file handles’ can be used to more conveniently reference files and automatically keep track of their random access pointers.

- Both sequential access pointers of ‘M-channels’ and random access pointers of ‘file handles’ can be moved to any position.

- Abbreviated syntax, allowing the omission of the ‘device type’ and ‘drive number’ fields in a statement, if they are the same as in the previous one.

The operating system of the ‘Interface 1bis’ has a very long development history, being written in 1994 and since then constantly improved and adapted to new hardware configurations. It is a mature, stable product, tailored to practical needs and offering arguably unrivalled functionality, speed and ease of use.

    Technical conditions of use

-  The ‘Interface 1bis’ should not be attached or removed while the ZX Spectrum is powered.

- The two jumpers of the 'Spectrum model selector' header should be set to the appropriate position:
   '48'  (1-2,3-4) for 'one-ROM' machines (48k, 128k, +2) or respectively
   '+3' (2-3,4-5)  for 'two-ROM' machines (+2A, +2B, +3)

 - An edge receptacle with softer contacts was deliberately chosen for the ‘Interface 1bis’, in order to reduce wear and tear. Therefore, the ZX Spectrum’s board edge must be in a fairly good condition, without grooves or asperities and in case it was refurbished, the solder layer must be perfectly levelled and its thickness must not exceed 0.05mm.
Otherwise, due to bad electrical contact, the ZX Spectrum may hang or behave erratically and the interface’s operating system may become corrupted, after switching to the ‘Active’ mode. In such a situation it is necessary to smoothen the ZX Spectrum’s board edge with a hard rubber eraser and apply an adequate lubricant, like Electrolube EML, followed by performing a few mating cycles. Thereafter the operating system has to be restored, as shown in the ‘Troubleshooting’ video tutorial.

- The ‘Interface 1bis’ cannot be switched to ‘Active’ mode if the supply voltage is too low, as its voltage supervisor disables memory paging whenever it drops below 4.75V for longer than 2 micro-seconds. This problem occurs mainly with 128k +2 (grey) models and can be solved only by replacing the 5V regulator of the ZX Spectrum.