Pubblicazioni, convegni ed eventi

Convegni

  1. C. Tosto, E. Pegolizzi, L. Vitiello, G. Filippone, G. Cicala. Production of PLA-Milled Carbon Fibers (MCF) filled filaments for Fused Filament Fabrication (FFF) printing. 5th International Conference POLCOM 24-27 November 2020, Bucharest. (accepted)

  2. C. Tosto, E. Pegolizzi, G. Cicala. Comparison of three Additive Manufacturing (AM) techniques for manufacturing complex hollow composite parts. 5th International Conference POLCOM 24-27 November 2020, Bucharest. (accepted)

  3. N. Cennamo, G. Cicala, L. Saitta, C. Tosto, F. Arcadio, L. Zeni, M.E. Fragalà. Surface Plasmon Resonance Sensor based on inkjet 3D printing. 2nd International Electronic Conference on Applied Sciences. Applied Sciences, MDPI. 15-31/10/2021, Online.

  4. C. Tosto, G. Cicala. Composites tooling manufacturing from different AM techniques. SAMPE Europe Conference 2021. 29-30 September 2021, Baden/Zurich, Switzerland.

  5. C. Tosto, L. Saitta, A. Latteri, G. Cicala. Fused Filament Fabrication of Polymeric Filaments filled with 17-4 PH metal particles: The effect of different printing profiles on Green and Sintered parts. XVI Convegno Nazionale AIMAT 2021, 15-18 settembre 2021, Cagliari (SA).

  6. C. Tosto, L. Saitta, E. Pergolizzi, G. Cicala. Composites tooling manufactured by additive manufacturing (AM): The effects of the selected AM technology. XVI Convegno Nazionale AIMAT 2021, 15-18 settembre 2021, Cagliari (SA).

  7. L. Saitta, C. Tosto, S. Dattilo, C. Puglisi, G. Cicala. Chemical Recycling of Bioepoxy matrices for Composites: Novel processing route and reuse strategies to obtain new matrices. XVI Convegno Nazionale AIMAT 2021, 15-18 settembre 2021, Cagliari (SA).

  8. C. Sergi, G. Cicala, F. Sarasini, C. Tosto, J. Tirillò. Combination of Fused Deposition Modeling (FDM) 3D-Printing and Sintering to Produce dense Metal parts. XVI Convegno Nazionale AIMAT 2021, 15-18 settembre 2021, Cagliari (SA).

  9. L. Saitta, C. Tosto, S. Dattilo, C. Puglisi, G. Cicala. Bio-epoxy matrices for composites: from recycling to possible re-uses. Polymers and Sustainability, Lampedusa 1-3 September, 2021.

  10. A. Latteri, C. Tosto, L. Saitta, G. Cicala. The use of additive manufacturing as a viable tool for easy composites processing: LCA evaluation and cost analysis. Polymers and Sustainability, Lampedusa 1-3 September, 2021.

  11. C. Tosto, A.D. La Rosa, S. Greco, G. Cicala. CF- thermoplastic composites: LCA and LCC analysis of a chemical recycling process. Polymers and Sustainability, Lampedusa 1-3 September, 2021.

  12. C. Tosto, G. Cicala, I. Blanco, A. Patti, L. Saitta. Effect of Porosity on the Thermal Conductivity of 3D Printed Parts by Fused Filament Fabrication (FFF). XLII National Conference on Calorimetry, Thermal Analysis and Applied Thermodynamics, January 27 - 28 2021 Online, Udine.

  13. C. Tosto, I. Blanco, G. Cicala. Epoxy Resin Formulation for 3D Printing by Liquid Crystal Display (LCD). XLII National Conference on Calorimetry, Thermal Analysis and Applied Thermodynamics, January 27 - 28 2021 Online, Udine.

  14. C. Tosto, L. Saitta, E. Pergolizzi, A. Patti, G. Celano, G. Cicala. Fused Deposition Modelling: New Standards for mechanical characterization. POLCOM 26-28 November 2020, Bucharest.

  15. G. Cicala, C. Tosto, G. Recca, A. Patti. Additive Manufacturing processing of plastics for mass production of composites tooling: technical and economic analysis. POLCOM 26-28 November 2020, Bucharest.

  16. L. Saitta, C. Tosto, E. Pergolizzi, A. Patti, G. Cicala. Liquid Crystal Display (LCD) printing: a novel system for polymer hybrids printing. POLCOM 26-28 November 2020, Bucharest.

  17. Blanco, G. Cicala, C. Tosto, G. Recca, G. Dal Poggetto, M. Catauro. Kinetic study of the thermal dehydration of fly ash filled Geopolymers. POLCOM 26-28 November 2020, Bucharest.

  18. C. Tosto, A. Latteri, E. Pergolizzi, D. Giordano, G. Abramo, R. Catenaro, N. Pignotti, G. Cicala (2019) Additive Manufacturing of Plastics: an efficient approach for composites tooling - Macromolecular Symposia - POLCOM 10-13 October 2019, Bucharest.

  19. G. Ognibene, C. Tosto, L. Saitta, G. Cicala, M.E. Fragalà, G. Li Volti (2019) Coatings with antibacterial properties for electrospun materials and additive manufacturing - Materials in the next decade 2019, 18-20 September 2019 Favignana (TP).

  20. G. Ognibene, I. Blanco, L. Saitta, C. Tosto, G. Cicala (2019) The use of thermo-mechanical technique to support the development of novel materials for additive manufacturing - CEEC-TAC5 & Medicta2019 - 27-30 August 2019 Roma.

  21. C. Tosto, E. Pergolizzi, I. Blanco, G. Cicala (2019) Thermomechanical properties of mandrels manufactured by 3D printing for the production of hollow FRP parts - CEEC-TAC5 & Medicta2019 - 27-30 August 2019 Roma.

  22. C. Tosto, G. Ognibene, L. Saitta, G. Recca, G. Cicala (2019) Epoxy blending for resins used in advanced manufacturing by DLP printing - XII INSTM CONFERENCE-XV AIMAT CONFERENCE, July 21-24, 2019 Ischia (NA).

  23. C. Tosto, G. Ognibene, L. Saitta, R. Catenaro, G. Cicala (2019) Additive manufacturing for tooling of plastics and fiber reinforced composites - XII INSTM CONFERENCE-XV AIMAT CONFERENCE, July 21-24, 2019 Ischia (NA).

  24. G. Ognibene, C. Tosto, G. Li Volti, M.E. Fragalà, L. Saitta, G. Cicala (2019) Functional electrospun veils: application from wound healing to frp composites - XII INSTM CONFERENCE-XV AIMAT CONFERENCE, July 21-24, 2019 Ischia (NA).

  25. S. Oliva, C. Tosto, A. Latteri, I. Blanco, G. Recca, G.Cicala (2019) Polymer Blends for Day-Light curing: application to DLP 3D printing - Eurofillers Polymer Blends 2019, Palermo, 23-26 April 2019.

  26. G. Ognibene, M.E. Fragalà, C.Tosto, A. Di Stefano, G. Li Volti, G.Cicala (2019) Electrospun Polyethersulfone nanofibers as cells scaffold - Eurofillers Polymer Blends 2019, Palermo, 23-26 April 2019.

Partecipazione a convegni ed eventi

  1. Competition: Participation at the SAMPE Students Selection 2021, 11/05/2021, online. Presentation of the "AMA" PhD Project, judged the winner for participating at the SAMPE Europe Conference, Baden/Zurich 25-30 September 2021.

  2. Summer school: Attendance and passing with Excellent valuation of the course "Advances in materials for medicine", Summer School Nonlinear Life 2021. University of Bergamo (Italy) and Riga Technical University (Latvia). 26-29 July 2021. (3 certified ECTS).

  3. Speaker at the webinar entitled “La Stampa 3D oltre la prototipazione”. Crea3D Srl. 13/04/2021, online.

  4. Speaker at the webinar entitled “Stampa 3D di filamenti metallici (Metal FFF)”. Crea3D Srl. 26/10/2021, online.

  5. Lecturer at the Master of Engineering Metallurgy of the University of Udine, invited by Prof. Fabio Miani. “Low Cost Steel Additive Manufacturing”. 07/03/2021, online.

  6. Conference: “JEC Summit Sports & Health Connect 2020” dedicated to the future of composites in Sports & Health. 8-9-10/12/2020, online.

  7. Conference: Formnext - International exhibition and conference on additive technologies and tool making. 10-12/11/2020, online.

  8. Summer school: 5th Short Summer School on Thermal Analysis and Calorimetry & 1st International Conference for Young Researchers and Students on Thermal Analysis and Calorimetry. 27 August 2019, Rome, Italy.

  9. Conference: Formnext 2018. The leading exhibition and conference dedicated to additive manufacturing and all of its upstream and downstream processes. 13-15 November 2018, Frankfurt (GE).