Satellite TV provides practically every home with entertainment. Its popularity has grown in time and not comparable with any of its off-shoots. Satellite TV installation is easy, even in the absence of a technician.
Installing Satellite TV yourself is far from complicated. There are dedicated guidelines available, which are easy to follow. The installation process has three basic requirements:
* Pre-planning and preparing the room.
* Keeping required equipment close at hand, including the tool-kit and coax.
* Following the guidelines/steps meticulously.
* Double checking the connectivity after the installation process is over.
Satellite TV installation is far from a daunting challenge. The technology uses the same electronic equipment that is commonly found around the home, compatible with other gadgetry. if you don't want to do the installation yourself. Those who do charge, keep the fee minimal. The process is very simple and uncomplicated.
It involves the following steps:
1. Ensure a clear view by choosing a room that is without obstruction in the direction specified in the manual. The angle of elevation to meet the directives of the geostationary orbit should be your primary objective, while identifying proper placement for the dish.
2. Avoid the common roof mount. Pole mount or any side of the outside structure works better to evade leaks and debris. The vagaries of nature should be kept in mind when picking the location.
3. Choose enclosed routing of the coax cable to the television. Ideally you should choose the shortest distance between the dish and the box.
4. The satellite dish should be installed with the help of a proper power drill. It should be secured and double checked for endurance. The fixture should be strong and hold fast against the elements.
5. Double-check the direction in which the dish is supposed to point. Stick to the instructions provided in the manual and also look around for other installations in the neighbourhood.
6. Run a cable to the television set, to detect signal strength. This should be coordinated between a person in the house and yourself. Or alternatively take the television set out.
7. Use a cable snake to move through ceilings, walls, attic or basement. The encasement allows you to route the cable wire without a mess.
8. Connect the cable to the satellite receiver and your new satellite TV is installed.
Important Checklist:
It is recommended that you consider the area you live in when installing the Satellite TV. This is because; it is much easier to install Satellite TV in individual premises than in an apartment. In apartments in some cities, you would need the consent of the Home Owner’s Association before getting on with the installation. You should ensure through the entire process that the dish needs to be aimed directly at the broadcasting satellite. You should consider the services of a local technician for the Satellite TV installation, if the task seems too difficult or challenging in the presence of a handicap. Improper installation would only result in an extra investment in re-purchase of equipment. The installation of the Satellite TV does not take more than a few hours. You can save on the installation fee by doing it yourself, but you need to be careful with the equipment, while following the self-installation process.
If your have any questions or comment,