Page 05 - Cap Catchers
(2) Vertical Mounting Hole Catcher.
It is about 7" high x 6 1/4" wide.
Vertical mounting hole center distant = approx. 2 1/2".
(There is a second mounting hole directly below the visible one.)
This catcher is used on all 1934 thru 1936 Westinghouse or Cavalier coolers.
(2) Horizontal Mounting Hole Catcher.
It's about 7 1/2" high x 6 1/4" wide.
Vertical mounting hole center distant = approx. 0".
This was used on -
Junior Ice, 1937 thru 1942
Junior Electric, 1939 thru 1942
Standard & Master Ice, 1937 thru 1939
Standard & Master Electric, 1937
Westinghouse only Giant Ice, 1939
(4) Mounting Hole Catcher.
It's about 27" high x 4" wide.
Vertical mounting holes center distant = approx. 10".
It has three face reliefs.
This was used on -
Standard & Master Electric, 1938 & 1939
Cavalier only Giant Ice, 1939
Giant Electric, 1939 & 1940
(4) Mounting Hole Catcher.
It's about 18" high x 5" wide.
Vertical mounting holes center distant = approx. 10".
It has one side relief all around.
This was used on -
Standard Ice & Electric, 1940 thru 1942
Master Ice & Electric, 1940 thru 1942
Giant Ice, 1940 thru 1942
Giant Electric, 1941 & 1942
For specific model names of coolers that these
were used on and other internal cap catcher models see Page 03 - Identifying Coolers.
(4) Mounting Hole Catcher.
(For bow sided cabinets)
(Cap puller was mounted on cabinet)
It's about 18 1/2" high x 4 1/2" wide.
Vertical mounting holes center distant = approx. 7".
This was used on -
Westinghouse only Master & Giant Ice, 1946-1948
(4) Mounting Hole Catcher.
(For bow sided cabinets)
(Cap puller was mounted inside catcher)
It's about 21" high x 4 1/2" wide.
Vertical mounting holes center distant = approx. 10".
This was used on -
Cavalier only Master & Giant Ice, 1946-1948
Master Ice & Dry, 1948 & later
Cavalier only Giant Dry, 1948 & later