"This solution is based on a fully Y2K patched server with all patches installed."

Section 1 : TCPIP Setup for Vmware Workstation & ICLAS / SchoolView

At the Server Console Screen you should see a " : " or a server name (example : CLL_01_ICLAS : )

Type load install then at the menu go to System Options and Edit the AUTOEXEC.NCF.

This  config is setup for TCPIP with IP  no tunneling

You must also load a NIC driver for each frame.

ETHERNET_II

ETHERNET_802.2

ETHERNET_802.3

ETHERNET_SNAP
SLOT and PORT Numbers may be different

##################################################

# EDLAN NETWORK CONFIG IBM  4/ 95 (CLL_01_LOWER)

##################################################

file server name CLL_01_LOWER

ipx internal net 4DF3221

REM THE FOLLOWING LINES WERE ADDED BY THE 3.2 ENHANCEMENT PACK INSTALLATION

LOAD AFTER311

REM END MODIFICATIONS MADE BY THE 3.2 ENHANCEMENT PACK INSTALLATION

SET ALLOW UNENCRYPTED PASSWORDS = ON

LOAD C:\SERVER.312\PCNTNW.LAN SLOT=10037 PORT=2000 int=B frame=ETHERNET_802.2 NAME=RPL_NET

LOAD C:\SERVER.312\PCNTNW.LAN SLOT=10037 PORT=2000 int=B frame=ETHERNET_802.3 NAME=IPX_NET

LOAD C:\SERVER.312\PCNTNW.LAN SLOT=10037 PORT=2000 int=B frame=ETHERNET_II NAME=IP_NET

LOAD C:\SERVER.312\PCNTNW.LAN SLOT=10037 PORT=2000 int=B frame=ETHERNET_SNAP NAME=APL_TLK

LOAD TCPIP

LOAD RPL

BIND IPX to IPX_NET=ED001

BIND IPX to RPL_NET=ED002

BIND IP to IP_NET MASK=255.255.255.0 ADDRESS=10.0.3.2 GATE=10.0.3.1

BIND RPL TO RPL_NET

# LANSPOOL INTERGRATION

LOAD LANSPOOL

# END LANSPOOL INTERGRATION