Embedded Files
This Ingersol Rand POV-2 oil engine is being recovered for display In a museum
in Coal Harbour BC. Canada. This engine was donated by Shearwater Marine Group
This recovery has been made possible by co-operation from Helifor Canada Corp,
Canadian Air Crane and Aquasea Industries ltd. This engine/compressor was used
in a open pit limestone quarry located in the central coast of BC. The limestone
was used at the pulp mill at Ocean Falls, BC. The first stage of the recovery was
to the Helifor barge located near Eberts Cove, Moses Inlet, and the second from
there past Cape Scott to Quatsino Sound, then to Coal Harbour, by landing craft.
Bob Musselwhite (Manager) preparing
to "Hook Up"
Hook Up!
Held about 8 inches off the deck
Pre flight brief.
Incoming from 4000 ft elavation, with 14,000 lbs engine.
"Mariah" preparing to lift off, and pick up the long line
Getting close to the deck.
Ground support placing the block
A little 'tire kickin" going on.
Joel Eilertsen, Mario Dirocco, Aircraft engineer, Brian Penner, Pilot, Bob Musselwhite, Manager, Bill Ruehl Pilot, John Krajnyak, Crew Chief, Colin Blake, Aircraft Engineer
Page updated
Google Sites
Report abuse