Window Vinyl Siding Installation In Bluffton, SC
Vinyl siding is like a suit of armor for your home. It is beautiful and requires low maintenance. It provides more lasting protection for your home than any other home exterior material, including cement and wood. Just like any other commodity, windows on a vinyl siding need maintenance and replacement. In case you are replacing old windows on your vinyl-sided home, you won’t need to disturb the exterior siding. However, if installing windows as part of more extensive renovations, you need to remove portions of the vinyl siding. For more information on vinyl siding window installation and replacement, get in touch with the Best Window Vinyl Siding Installation Services In Bluffton SC !
Call Now 843-689-2140
Step-by-step Instruction For Installing A Vinyl Siding Window
Below are detailed steps on how to replace windows on a vinyl-sided home.
1. Removing Siding
You can easily remove sections of the vinyl with the right tools. Home supply stores offer inexpensive zip tools that you can use to remove the parts. The machines are used to slide into the locking edge of the vinyl siding and unhook it. Loosen the nails that secure the siding to the wall to remove the siding with a small pry bar. Insert the pry bar behind the pin only and not the siding to minimize damage to the siding that you might want to reuse later.
2. Inspecting Building Paper And Flashing
Vinyl siding does not create a waterproof barrier. Thus, building paper and flashing behind it is essential. The building paper should extend behind the window’s nailing fin. Once you have removed the siding, patch up any hole with house-wrap tape. The flashing along the bottom should extend past the corners of the window and overlap the nailing hem. Shooting along the sides should extend five inches from the edge, two inches past the top and overlap the bottom flashing by at least two inches.
3. Installing Molding
Trim the newly-installed window with J-channel or J-molding before the siding installation. The J-channel should overlap the window by two inches to allow for proper installation. Also, cut notches into the J-channels for the pieces to fit together. You can use underfill trim to create a tighter fit between the siding and the molding.
4. Cutting Siding
Cut vinyl siding with either tin snips or a utility knife. Do not close the snips entirely to make a smoother cut. Mark and then cut the pieces of siding adjacent to the new window. Allow half an inch of space for expansion.
5. Installing The Siding
Once you have cut the siding, the next step is to install it. Each siding piece should slip into the J-channel, but leave half an inch for expansion in the J-channel. The locking edge at the bottom of the siding locks with the course below—hammer roofing nails into the center of the holes to hold it in place. Leave ¼ inch of the nail exposed to allow the sliding to move as it expands.
The Best Window Vinyl Siding Installation Services In Bluffton, SC
It is hard to understand how to install a window vinyl siding, especially if it is your first time. Holliday Home Improvements provides the Best Window Vinyl Siding Installation Services In Bluffton SC quality, reliable, and professional window installation services to those who find the task quite hard. We have professionals who are experts at installing your vinyl window siding.
Try Out Our Services And See For Yourself!
Call Holliday Home Improvements At 843-689-2140 Today!
Holliday Home Improvements
138 Burnt Church Road, Suite I, Bluffton, SC 29910
843-689-2140