Easy Remote Boot

Easy Remote Boot APP sends a WOL packet to your remote device to boot it up.

  This feature is only available via Wi-Fi.

  The Wi-Fi broadcast address is set automatically.

  The 9 settings are saved automatically.

  Settings can be changed with the arrow buttons or a swipe gesture.

  Labels can be added to your settings.

  The status is displayed at the bottom.

How to use

First, confirm the MAC address of your remote device.

Next, enter the MAC address in this App.

Then, enter the broadcast address or tap GET_BRD_ADD button.

Finally, tap the SEND button to send the WOL packet.

A MAC address consists of six pairs of hexadecimal digits, such as 01:22:33:44:55:66.

How to confirm the MAC address of your remote device.

1.Press the HOME button on your remote device.

2.Select SETUP.

3.Go to SYSTEM SETTING.

4.Select System Info or Network Info.