Embedded Files
It’s time to take your Hardrock-50 to the next level. If you have a Hardrock-50, you already know how a solid, well designed, 50 watt amplifier can thoroughly enhance your QRP operation. Introduced in 2013 with more than 2000 units sold, the Hardrock-50 is the most successful 50W HF+6M amplifier kit of all time. Fast forward 10 years to 2023 and the HobbyPCB engineers have managed to modernize the Hardrock-50 and double the output power in the same enclosure! The Hardrock-50+ is actually 4 oz. lighter than the Hardrock-50. There’s no need to drop more than $1000 to step up to the 100W level, we’ll get you there for much less.
The Hardrock-50+ 100W upgrade kit uses an existing Hardrock-50 amplifier and provides a new amplifier board and new control board that significantly enhances the Hardrock-50.
Increases the output from 50W to 90-100W on 160-10M and 60-70W on 6M.
Provides more extensive metering; Power, SWR, Temperature, Voltage and Current displays
Uses active protection in fault conditions
New color graphic LCD with enhanced displays and menus
Built-in bias current measurement for easy alignment
RF frequency detection and COR for automatic band selection with ANY transceiver
Super efficient NXP MRF101 LDMOS transistor
Easily powered by a 50V 4A DC power supply
Seven element elliptical filters for each band exceeds FCC spectral purity requirements
Uses the same ATU and interface kits as the 50W amp
Page updated
Google Sites
Report abuse