Embedded Files
IMCA Stock Car Complete Engine
Engine has been Raceprepped-Balanced-Blueprinted
Block=GM 350 4-Bolt---
Bore=4.030---
Crankshaft=Cast 041 GM turned to std rods & mains---
Stroke=3.542---
Deck=0.00---
Pistons= J&E 17067 Flat Top with -5cc dome volume---
Camshaft=Com-Cam 12-650-5 true roller with steel tip gear
Liffters=Howard #91118---
Rods=6.125 S.J. PEP #CR3-6125-1QS
Heads=GM993 @ 68.5cc chamber---Installed Height=1770---
Valve Springs=PEP #053-574-7000-1.260 O.D.---
Seat Pressure=130l.b.---
Intake Valves=Ferrea 2.02 Part#F5002---
Exhaust Valves=Ferrea 1.6 Part#F5005---
Retainers=PEP USR100-1---
Valve locks=PEP 7deg Part#059-117-060---
Rocker Arm Studs=ARP 3/8 2in Part#134-701---
Intake Manifold=Aluminum Weiand IMCA X–CELerator---
I have complete build sheets & cam card---
Oil Pan=CP55LT Champ Pan with HV Oil pump
We have built many of these engines and have track champions all over the midwest.
PROCESSING TIME:
In most cases I will ship the same day or the next day after I receive payment. Although, I do sometimes get busy with my day job, working in my raceshop or family things. It may take me 1-2 days to ship the items out after I receive payment. I'm sure you understand.
SHIPPING/FREIGHT COST:
Buyer will pay all shipping/Freight costs. Will have to be crated and shipped out on truck freight. Contact me with your shipping info (zip code) for a shipping quote.
LOCAL PICKUP: If you are in the Moline, IL area and want to pick it up or look at it. I most certainly can do that, just contact me to arrange a time.
Call any time 309-762-2323 Ask for Adam
$4999.99 + Shipping
===============================================================================
412 IMCA Modified Claimer
This engines is also very popular with our open wheel customers. It provides you with a whole lot of power for a down to earth price. This engine is a proven winner.
412ci Complete 2-Bolt Balanced & Blueprinted-Keith Black Pistons & Rings Lunati Cam & Solid Liffters-Eagle 5-7 SIR Rods with ARP Bolts -GM Ported 305 Heads with screw in studs & 1.94 Intake valves and matched Weiand aluminum intake.
All shortblocks that I build have been Hot Tanked-Magged-Pressure Tested @ 40lb-with aLL clearances checked-Main Caps-Line Bore-Can journals and all Bolt Holes
They have all been Race Prepped-Balanced & Blueprinted.And have new cam bearings-frost plugs installed
PROCESSING TIME:
In most cases I will ship the same day or the next day after I receive payment. Although, I do sometimes get busy with my day job, working in my raceshop or family things. It may take me 1-2 days to ship the items out after I receive payment. I'm sure you understand.
SHIPPING/FREIGHT COST:
Buyer will pay all shipping/Freight costs. Will have to be crated and shipped out on truck freight. Contact me with your shipping info (zip code) for a shipping quote.
LOCAL PICKUP: If you are in the Moline, IL area and want to pick it up or look at it. I most certainly can do that, just contact me to arrange a time.
"serious offers only" please
Call any time 309-762-2323 Ask for Adam for Details
=============================================================================
IMCA Late Model Engine
This engines is one our most popular builds.Raced in IMCA dirt late models.
Here in Illinois in the 2013 season we were proud to say that we powered Quad Cities Speedway's IMCA Late Model Track Champion Todd Malmstrom.He is one of the many Track Champions we build engines for. I am proud to say here at Gustaf Engines we have powered over 20 track champions in our 30 years of service. Here at Gustaf Engines have always been and always will be family owned and operated. We take pride in perfection here at our shop and will always put 100% of our 200 years of combined experience to work for you and you engine.Feel free to give us a call or respond here on Racing Junk.
PROCESSING TIME:
In most cases I will ship the same day or the next day after I receive payment. Although, I do sometimes get busy with my day job, working in my raceshop or family things. It may take me 1-2 days to ship the items out after I receive payment. I'm sure you understand.
SHIPPING/FREIGHT COST:
Buyer will pay all shipping/Freight costs. Will have to be crated and shipped out on truck freight. Contact me with your shipping info (zip code) for a shipping quote.
LOCAL PICKUP: If you are in the Moline, IL area and want to pick it up or look at it. I most certainly can do that, just contact me to arrange a time.
Call or message for details."serious offers only" please
309-762-2323 Ask for Adam
$7,999
=============================================================================
372 SBC Open Racing Engine
Complete Race prepped Balanced & Blueprinted 372
New Race Prepped Dart Little M Sportsman Block with priority Oiling with a fresh 4.125 Bore (Never Raced) DYNO ONLY
New Scat 3.480 Stroke-4340 Steel Crank STD.
New J&E .450 Dome #JE182067 with moly rings = +4cc dome volume
Comp Cams Custom Roller Cam Intake Gross Lift=.4200x1.6=.672
Exhaust Gross lift .4200x1.55=.651
@.050 Int=254 Exh=260
Crowler Lifters
Jessel Shaft Rockers 1.6 i.n. and1.55 e.x.
Dart 56cc aluminum 21 deg heads with New Manley Valve springs #221044 with 1.610 O.D.
New Manley 2.80 and 1.625 Valves +.300
New Eagle H-Beam 6 i.n. Rods
New Champ Oil Pan & Pick-up with high volume racing oil pump
New MSD HEI Distributor with rev limiter & New Phillips Plug Wires
New SFI Power Bond Balancer
New Aluminum 15% Racing Pullys
New Aluminum Racing Water Pump
Fresh Build -Dyno Only
=====================================================================
434 ci SBC Hi-Comp-for 2 barrel
This monster has a 817 Splayed cap 4.155 bore,Race Prepped-Balanced & Blue Printed block with a 4.000in stroke 4340 steel Scat crank.
Weisco ft pistons and speed pro rings.It has crower Steel 1.5 rocker arms with a Custom Cam #260-269.
6in Carrilo sj Rods and carrilo rod bolts.
has a sfi PP90,000 350 balancer and takes a 350 flywheel.
The top end has a very nice set of Angel Plug 54cc chamber- port matched pro heads #223400035A with Titanium Valves and a very nice Port matched High Rise 2925 Edelbrock Super Victor intake
All shortblocks and completes that we build have been Hot Tanked-Magged-Pressure Tested @ 40lb-with aLL clearances checked-Main Caps-Line Bore-Can journals and all Bolt Holes
They have all been Race Prepped-Balanced & Blueprinted.And have new cam bearings-frost plugs installed
PROCESSING TIME:
In most cases I will ship the same day or the next day after I receive payment. Although, I do sometimes get busy with my day job, working in my raceshop or family things. It may take me 1-2 days to ship the items out after I receive payment. I'm sure you understand.
SHIPPING/FREIGHT COST:
Buyer will pay all shipping/Freight costs. Will have to be crated and shipped out on truck freight. Contact me with your shipping info (zip code) for a shipping quote.
LOCAL PICKUP: If you are in the Moline, IL area and want to pick it up or look at it. I most certainly can do that, just contact me to arrange a time.
"serious offers only" please
For more details
Call 8-5 Mon-Fri 309-762-2323 Ask for Adam
After 5 call Eric @ 309-791-1224
===========================================================================================
383 Stroker with roller cam with ported aluminum heads & intake $3700.00 w exc
88 & up SBC 383 Stroker with hydraulic roller cam & alu heads & intake $3800.00 with exc
===========================================================================================
Page updated
Google Sites
Report abuse