123.hp.com/setup
123.hp.com/setup - Guide to Set up 123 HP printer
Install and download HP Printer driver software for HP printer setup. Before you scanning a documents into your devices with a 123.hp.com/setup scanner, you need to install the printer scanner driver so that your Printer scanner and devices can communicate.
Start by connecting the printer setup scanner to your devices with USB port. Get started with hp printer at www.123.hp.com/setup and make wireless connection with your device by following the steps.
Update HP Printer Driver for Windows with Device Manager
Go to Device Manager. Expand category “Print Queues” or “Printer” by click the arrow that is point right as seen below.
Under this category, right-click on the HP printer listed. Click “Search automatically” for updated driver software.
After the print driver is installed, restart your computer for the changes to be fully implemented.
How to Complete the HP Printer Initial Setup using 123.hp.com/setup ?
Unbox the printer. Get rid of the packaging materials and take out the device as carefully as possible.
Your printer can withstand physical damage only to an extent, so it is better if you proceed with care.
Once you take the device out, check all the accessories that come along with the package.
Lay them out so it will be easier for you to complete the setup process.
Remove all the covers and tapes on the printer. Remove the filler materials from the cartridge section.
Connect the HP printer to a power source. Make sure the power source is a reliable ad constant.
Turn ON the printer and check if the identification light glows.
Once the device turns ON, you can proceed with the setting up of initial preferences like language, time, region, location, etc.
After this, you can install the ink cartridges at the respective section.
You have to open the ink cartridge door to install the ink cartridges.
Strip the tape off of the cartridges and go on to install the ink cartridges in their respective slots.
A click sound will indicate that the ink cartridges are perfectly installed.
With the ink cartridges on their respective place, you can now load the paper stack to the device.
Use the paper width guide to adjust the alignment of the stack.
With this, your initial setup of the HP printers is now complete.
You can refer to 123.hp.com/setup in case you have any doubts related to the setup.