Publications
A number of publications may be downloaded from the Dropbox link.
Disclaimer:
These publications are provided for timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by the authors or copyright holders. All persons using these documents are expected to adhere to the terms invoked by each author's copyright. These works may not be reposted without the explicit permission of the copyright holder.
Journal Publications
1. MacRae G. A., "P-delta Effects on Single-Degree-of-Freedom Structures in Earthquakes", Earthquake Spectra, Vol. 10, No. 3, August 1994, pp. 539-568.
2. Kawashima K., MacRae G. A., Hoshikuma J. and Nagaya K., "Residual Displacement Response Spectrum and Its Application", Journal of the Japan Society of Civil Engineers, No. 501/I-29, October 1994, pp. 183-192. (In Japanese).
3. Kowalsky M. J., Priestley M. J. N. and MacRae G. A., "Displacement-Based Design of RC Bridge Columns in Seismic Regions", Earthquake Engineering and Structural Dynamics, Vol. 24, 1995, pp. 1623-1643.
4. Priestley M. J. N. and MacRae G. A., "Seismic Tests of Precast Beam-to-Column Joint Subassemblages with Unbonded Tendons", PCI Journal, January-February 1996, pp. 64-80.
5. MacRae G. A. and Kawashima K., "Post-Earthquake Residual Displacements of Bilinear Oscillators", Earthquake Engineering and Structural Dynamics, Volume 26, 1997, pp. 701-716.
6. Priestley M. J. N., Seible F., MacRae G. A., and Chai Y. H., "Seismic Assessment of the Santa Monica Viaduct Bent Details", ACI Structural Journal, 94(5), September-October 1997, pp. 513-524.
7. Kawashima K., MacRae G. A., Hoshikuma J. and Nagaya K., "Residual Displacement Response Spectrum", ASCE Journal of Structural Engineering, ASCE, May 1998, pp. 523-530.
8. Roeder C. W., MacRae G. A., Crocker P., Arima K. and Wong S., "Dynamic Response and Fatigue of a Tied-Arch Bridge", ASCE Journal of Bridge Engineering, ASCE, 5(1), February 2000, pp14-21.
9. MacRae G. A. and Mattheis J., "Three-Dimensional Steel Building Response to Near-Fault Motions", ASCE Journal of Structural Engineering, January 2000, pp. 117-126.
10. MacRae G. A. and Kawashima K., "Seismic Behavior of Hollow Stiffened Steel Bridge Columns", ASCE Journal of Bridge Engineering, 6(2), Mar/Apr 2001, pp 110-119.
11. MacRae G. A. and Tagawa H., "Seismic Behavior of 3-D Steel Frame with Biaxial Columns", ASCE Journal of Structural Engineering, 127(5), May 2001.
12. MacRae G. A., Morrow D. and Roeder C. W., "Near-Fault Ground Motion Effects on Short Period Structures", ASCE Journal of Structural Engineering, 127(9), September 2001, pp 996-1004.
13. Kimura Y., Tagawa H., Lehman D. and MacRae G. A., "Report of Damage to Building Structures Cause by the Nisqually Earthquake in 2001", Architectural Institute of Japan, J. Technol. Des,. No 14, p373-376, December 2001.
14. Roeder, C. W., MacRae G. A., and Scott K., "Seismic Performance of Older Steel Frame Mill Buildings", Journal of Steel Constructional Research, 58, 759-777, 2002, Elsevier.
15. Kimura Y. and MacRae G. A., "The Effect of the Column Flexural Stiffness on Story Drift Concentration Mechanism of Two Story Braced Frames", Architectural Institute of Japan, Journal of Constr. Eng., No. 560, pp 189-195, October 2002. (Japanese)
16. MacRae G. A., Roeder C. W., Gunderson C. and Kimura Y., "Brace-Beam-Column Connections for Concentrically Braced Frames with CFT Columns", Journal of Structural Engineering, ASCE. February 2004, 130(2), pp. 233-243.
17. MacRae G. A., Kimura Y., and Roeder C. W. "Effect of Column Stiffness on Braced Frame Seismic Behavior", Journal of Structural Engineering, ASCE. Journal of Structural Engineering, March 2004, 130(3), pp. 381-391.
18. Kim J., Stanton J., and MacRae G. A., "Effect of Beam Growth on Reinforced Concrete Frames", Journal of Structural Engineering, ASCE, 130(9), pp. 1333-1342, September 2004.
19. Roeder C. W., MacRae G. A., Leland A. and Rospo A., "Extending the Fatigue of Riveted Coped Stringer Connections", Journal of Bridge Engineering, Vol. 10, No. 1, January/February 2005, pp. 69-76.
20. Kimura Y. and MacRae G. A., “Effect of the Column Flexural Stiffness and Strength on Story Drift Concentration Mechanism of Two Story Braced Frames with Fixed Column Base”, Architectural Institute of Japan, Journal of Struct. Constr. Eng., No. 593, pp 153-160, July 2005.
21. Tagawa H., MacRae G. A. and Lowes L. N., “Hysteresis Loop Effects on Stability and Maximum Drift of Structures”, Journal of Structural and Construction Engineering, Transactions of AIJ, No. 602, Architectural Institute of Japan, April, 2006.
22. Tagawa H., MacRae G. A. and Lowes L. N., “Evaluation of Simplification of 2D Moment Frame to 1D MDOF Coupled Shear-Flexural-Beam Model”, Journal of Structural and Constructional Engineering, Transactions of AIJ, No 609, November, 2006.
23. Tagawa, H., MacRae, G. A., and Lowes, L., (2007), “Evaluation of Seismic Response of Multi-Story Structures Using Dynamic Stability Coefficients - Continuous Column Effects in Steel Moment Frames in Perspective of Dynamic Stability (Part 1)”, Journal of Structural and Constructional Engineering, Transactions of the Architectural Institute of Japan, AIJ. No.618 (20070830), pp. 57-64. ISSN:13404202.
24. Umarani C. and MacRae G. A. “A New Concept For Consideration Of Slab Effects On Building Seismic Performance”, Journal of Structural Engineering, Structural Engineering Research Centre, Chennai, India, No. 34-3, Vol. 34, No.1, April-May 2007, pp. 25–32.
25. Bradley B. A., Dhakal R. P., Cubrinovski M., Mander J. B., MacRae G. A., “Improved Seismic Hazard Model With Application To Probabilistic Seismic Demand Analysis”, Earthquake Engineering and Structural Dynamics, 36:2211-2225, June 2007.
26. Peng, B. H. H., MacRae, G. A., Walpole, W. R., Moss, P., Dhakal, R., Hyland, C., and Clifton, C. 2007. "Location of Plastic Hinges in Axially Loaded Steel Members." Journal of Constructional Steel Research. Vol. 64/3. pg 344-351.
27. Peng B. H. H., MacRae G. A., Walpole W. R., Moss P., Dhakal R. and Clifton G. C. “Plastic Hinge Location Under Seismic Actions In Columns Of Steel Frames”, Bulletin of New Zealand Society of Earthquake Engineering, 41(1) March 2008, pp 1-9.
28. Butterworth, J., Clifton, C. and MacRae, G. (2008) Developments in steel frame joints. The Structural Engineer, 86(16), 2021.
29. Tagawa H., MacRae G. A., and Lowes L., “Probabilistic Evaluation of Seismic Performance of 3-story 3D One- and Two-way Steel Moment-frame Structures”, Earthquake Engng Struct. Dyn. 2008; 37:681–696.
30. Bradley B. A., Cubrinovski M., MacRae G. A., and Dhakal R. P., “Ground-Motion Prediction Equation for SI Based on Spectral Acceleration Equations”, Bulletin of the Seismological Society of America, Feb 2009; 99: 277 - 285.
31. Bradley BA, Dhakal RP, Cubrinovski M, MacRae GA, and Lee DS. Seismic loss estimation for efficient decision making. Bulletin of the New Zealand Society for Earthquake Engineering 2009; 42(2): 96-110.
32. Lu A. Y. C. MacRae G. A., Ziemian R., Hahn C., Peng B. H. H., and Clifton G. C., Extended Direct Analysis of Steel Frames, NZ Society of Structural Engineering (SESOC) Journal, 22(2), September 2009.
33. Fenwick R. and MacRae G. A, Comparison of New Zealand Standards used for Seismic Design of Concrete Buildings, Bulletin of the New Zealand Society for Earthquake Engineering Inc., 42 (2009), ISSN No. 1174-9857.
34. Sadashiva, V.K., MacRae, G.A. and Deam, B.L. (2009) Determination of structural irregularity limits - mass irregularity example. Bulletin of the New Zealand Society for Earthquake Engineering, 42, 4, 288-301.
35. MacRae G. A., Urmson C. R., Walpole W. R., Moss P., Hyde K. and Clifton G. C., “Axial Shortening of Steel Columns in Buildings Subjected to Earthquakes”, Bulletin of the NZ Society of Earthquake Engineering, December 2009.
36. Mander T. J., Rodgers G. W., Chase J. G., Mander J. B. MacRae G. A. and Dhakal R. “A Damage Avoidance Design Steel Beam-Column Moment Connection Using High-Force-To-Volume Dissipators”, American Society of Civil Engineering. Journal of Structural Engineering, 135(11), November 1, 2009, pp1390–1397. ISSN 0733-9445.
37. Bradley B. A., Cubrinovski M., Dhakal R. P., MacRae G. A., “Intensity Measures for the Seismic Response of Pile Foundations”, Soil Dynamics and Earthquake Engineering, 29 (6), p.1046-1058, Jun 2009.
38. Bradley B., Dhakal R. MacRae G. A. and Cubrinovski, “Prediction of Spatially Distributed Seismic Demands in Structures: Ground Motion and Structural Response”, Earthquake Engineering and Structural Dynamics, 39(5), 501-520, 2010.
39. Bradley B.; Dhakal R.; MacRae G.; Cubrinovski M., “Prediction of Spatially Distributed Seismic Demands In Specific Structures: Structural Response To Loss Estimation", Earthquake Engineering and Structural Dynamics, 39(6), 591-613 2010.
40. Tagawa, H., MacRae, G. A., and Lowes, L., (2010), “Continuous Column Effects of Gravity Columns in U.S. Steel Moment-resisting Frame Structures- Continuous Column Effects in Steel Moment Frames in Perspective of Dynamic Stability (Part 2)”, Journal of Structural and Constructional Engineering, Transactions of the Architectural Institute of Japan, AIJ., 75(650), pp.761-770, April.
41. MacRae G. A., Lu A. Y. C., Peng B. H. H., Hahn C., Ziemian R. and Clifton G. C., Plastic Hinge Locations In Steel Columns, Bulletin of the NZ Society of Earthquake Engineering, 43(1), March 2010, pp 7-12, ISSN No. 1174-9857.
42. Nayyerloo, M, Chase, JG, MacRae, G, Chen, XQ and Hann, CE (2010). “Structural Health Monitoring using Adaptive LMS Filters,” International Journal of Computer Applications in Technology (IJCAT), Vol 39(1/2/3), pp. 130-136, ISSN: 0952-8091 (invited).
43. MacRae G. A., Clifton G. C., Mackinven H., Mago N., Butterworth J. and Pampanin S., The Sliding Hinge Joint Moment Connection, Bulletin of the New Zealand Society for Earthquake Engineering, 43(3), September 2010, pp 202-212.
44. Bradley B. A., Cubrinovski M., Dhakal Rajesh P. and MacRae Gregory A., “Probabilistic Seismic Performance and Loss Assessment of a Bridge-Foundation-Soil System”, Soil Dynamics and Earthquake Engineering Volume 30, Issue 5, May 2010, Pages 395-411, doi:10.1016/j.soildyn.2009.12.012.
45. Bruneau M., Anagnostopoulou M., MacRae G., Clifton G. C. and Fussell A., Preliminary Report on Steel Building Damage from the Darfield Earthquake of September 4, 2010.. Bulletin of the New Zealand, Society for Earthquake Engineering, December (2010)
46. Desombre J., Rodgers G. W., MacRae G. A., Rabczuk T., Dhakal R. P., Chase J. G., Experimentally Validated FEA Models of HF2V Damage Free Steel Connections For Use In Full Structural Analyses, "Structural Engineering and Mechanics, An international Journal", SEM9N626C, Structural Engineering and Mechanics, 37(4), March 10, 2011.
47. Sadashiva, V., MacRae G. A., and Deam B., “Seismic Response Of Structures With Coupled Vertical Stiffness-Strength Irregularities”, Earthquake Engineering and Structural Dynamics, EQE-09-0313. 30 March 2011. DOI: 10.1002/eqe.1121, http://onlinelibrary.wiley.com/doi/10.1002/eqe.1121/abstract.
48. Sadashiva VK, MacRae GA, Deam BL. Effects of coupled vertical stiffness-strength irregularity due to modified interstorey height. Bulletin of the New Zealand Society for Earthquake Engineering 2011; 44(1): 31-44.
49. Clifton C, Bruneau M, MacRae GA, Leon R. and Fussell A. Steel Structure Damage from the Christchurch Earthquake Series of 2010 and 2011. Bulletin of the New Zealand Society for Earthquake Engineering 2011; 44(4): 279-318.
50. Dhakal R, MacRae GA, and Hogg K. Performance of Ceilings in the February 2011 Christchurch Earthquake. Bulletin of the New Zealand Society for Earthquake Engineering 2011; 44(4): 377-387.
51. Nayyerloo, M, Chase, JG, MacRae, GA and Chen, XQ (2011). “LMS-based approach to structural health monitoring of nonlinear hysteretic structures,” Journal of Structural Health Monitoring, 10(4), pp. 429-444, ISSN: 1475-9217.
52. MacRae G. A., Myint U. T, and Jain S. K., “Steps in earthquake proofing a country:- a case study of Myanmar”, Bulletin of the NZ Society for Earthquake Engineering, June 2011. (From 2010 NZSEE Conference paper)
53. MacRae G. A., (2011) 22 February Christchurch Earthquake – Questions Regarding the Design Process. Journal of the Structural Engineering Society of NZ Inc., 24(1), 810.
54. Nayyerloo, M, Chase, JG, Millane, A, Muller, C, Malherbe, A, Chen, XQ, and MacRae, GA (2011). "Seismic structural displacement measurement using a line-scan camera: camera-pattern calibration and experimental validation," Journal of Civil Structural Health Monitoring (JCSHM),Vol. 1(3/4), pp. 113-124, ISSN: 2190-5452.
55. Bacht, T, Chase, JG, MacRae, GA, Rodgers, GW, Rabczuk, T, Dhakal, RP and Desombre, J (2011). “HF2V Dissipator Effects on the Performance of a 3 Story Moment Frame,” Journal of Constructional and Steel Research (JCSR), Vol 67(12), pp. 1843-1849, ISSN 0143-974X.
56. Khoo H.H., Clifton G. C, Butterworth J. W., MacRae G. A. and Ferguson G., Influence of steel shim hardness on the Sliding Hinge Joint, Journal of Constructional Steel Research, 72:119-129, JCSR-D-11-00200R1. Published Online 14 December 2011.
57. Rodgers G.W., Chase J. G., Roland T., MacRae G. A., (2012). Spectral analysis for a semi-active–passive net-zero base-shear design concept, Earthquake Engineering and Structural Dynamics, 41(8), pages 1207–1216. Also, published online in Wiley Online Library (wileyonlinelibrary.com). EQE-11-0117. DOI: 10.1002/eqe.1177, 2011.
58. Sadashiva V., MacRae G. A., and Deam B. “Quantifying the Seismic Response of Structures with Flexible Diaphragms”, Earthquake Engineering and Structural Dynamics, DOI: 10. Published online in Wiley Online Library (wileyonlinelibrary.com). DOI, 1002/eqe.1187, 2012, John Wiley & Sons, Ltd.
59. Ahmed Saddam M., Gunasekaran U., MacRae G. A., A Parametric Study of the Reinforced Concrete Slab Subjected to Dynamic Excitation, Applied Mechanics and Materials Vol. 147 (2012) pp 270-277, © (2012) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.147.270
60. Bruneau M., Clifton O., MacRae G. A., Leon R. and Fussell A. “Comportement des Batiments Metalliques lors des Seismes de Christchurch, Nouvelle-Zealande, en 2010 et 2011”, Revue Construction Métallique, n° 4-2011, pp.3-25.
61. Corman, S, MacRae, GA, Rodgers, GW and Chase, JG (2012). “Nonlinear Design and Sizing of Semi-Active Resetable Dampers for Seismic Performance,” Engineering Structures, Vol 39, June, pp. 139-147, ISSN: 0141-0296
62. Corman, S, Chase, JG, MacRae, GA and Rodgers, GW (2012). “Development and Spectral Analysis of an Advanced Diamond Shaped Resetable Device Control Law,” Engineering Structures, 40(1), pp. 1-8, ISSN: 0141-0296.
63. Sheet I. S., Umarani, C. and MacRae, G. A., Modelling of Steel Beam-Column Connections under Dynamic Excitation, Journal of Structural Engineering (JoSE), Vol. 40, No. 3, August - September 2013 pp. 254-261 No. 40-29.
64. Ahmed, S. M., Umarani, C. and MacRae, G. A. “Slab Effects on Building Seismic Performance: State of The Art”, Journal of Structural Engineering (JoSE), 40(2), June - July 2013, pp. 136-141.
65. Labise, C.C., Rodgers, G.W., MacRae, G.A., Chase, J.G. (2012), "Viscous and Hysteretic Damping - Impact of Capacity Design Violation in Augmented Structural Systems" Bulletin of the New Zealand Society for Earthquake Engineering, Vol 45. No. 1, March 2012, pp 23-30.
66. Beziat, A, Munoz, AM, Chase, JG, MacRae, GA, Rodgers, GW and Clifton, C (2012). “Performance Analysis of Energy Dissipators and Isolators Placed in Bridges to Prevent Structural Damage in Columns,” Journal of Earthquake Engineering (JEE), Vol 16(8), pp. 1113-1131, ISSN: 1363-2469.
67. Khoo H. H., Clifton G. C., Butterworth J., MacRae G. A., Gledhill S. and Sidwell G., 2012. “Development of the Self-Centering Sliding Hinge Joint with Friction Ring Springs”, Journal of Constructional Steel Research, 78 (2012), 201–211.
68. Yeow T., MacRae G. A., Kawashima, K and Sadashiva V. K. Dynamic Stability and Design of C-Bent Columns, Journal of Earthquake Engineering, 17(5), 2013, pp. 750-768. http://www.tandfonline.com/doi/abs/10.1080/13632469.2013.771591.
69. MacRae G. A., Lessons from the February 2011 M6.3 Christchurch Earthquake, Journal of Seismology and Earthquake Engineering, Tehran, Iran, 14(3), 2013, pp 81-93. http://www.iiees.ac.ir/jsee.
70. Khoo H. H., Clifton G. C., Butterworth J., MacRae G. A., “Experimental study of full-scale self-centering Sliding Hinge Joint connections with friction ring springs”, UEQE-2012-1463. Journal of Earthquake Engineering, 17(7): 972-997, 2013.
71. Sheet I. S., Gunasekaran U., and MacRae G. A, Experimental Investigation of CFT Column to Steel Beam Connections Under Cyclic Loading, Journal of Constructional Steel Research, 86 (2013) 167–182.
72. Khoo H. H., Seal C., Clifton G. C., Butterworth J., MacRae G. A., “Behaviour of Top and Bottom Flange Plates in the Sliding Hinge Joint”, Bulletin of the NZ Society for Earthquake Engineering, 46(1), March 2013, pp 1-10. ISSN No. 1174-9857.
73. Iihoshi C., MacRae G.A., Rodgers G.W., Chase J.G., Viability of Slab Sliding System for Single Story Structure, World Academy of Science, Engineering and Technology, International Journal of Mechanical, Industrial Science and Engineering, 8(2), 2014. Paper #129. www.waset.org/Publications
74. Sridhar, A, Kuang, A, Garven, J, Gutschmidt, S, Chase, JG, Gavin, HP, Rodgers, GW and MacRae, GA (2014). “Christchurch Women's Hospital: Analysis of Measured Earthquake Data During the 2011-2012 Christchurch Earthquakes,” Earthquake Spectra, Vol 30(1), pp. 383-400, ISSN: 5-2930, doi: 10.1193/021513EQS027M (invited special edition on Christchurch earthquakes).
75. Chase, JG, Boyer, F, Rodgers, GW, Labrosse, G and MacRae, GA (2014). “Probabilistic Risk Analysis of Structural Impact in Seismic Events for Linear and Nonlinear Systems,” Earthquake Engineering & Structural Dynamics (EESD), Vol 43(10), pp. 1565-1580, ISSN: 0098-8847, doi: 10.1002/eqe.2414.
76. Rodgers, GW, Mesnil, O, Chanchi, J, MacRae, GA, Clifton, GC and Chase, GJ (2014). “Generalizes Non-linear Modelling of Unstable Stick-Slip Force Reduction Effects in Friction Energy Dissipation Devices,” Bulletin of the NZ Society for Earthquake Engineering, 47(3), September 2014, pp 217-223. ISSN No. 1174-9857.
77. Khoo H-H., Clifton C., MacRae G., Zhou H. and Ramhormozian S., “Proposed design models for the asymmetric friction connection”, Earthquake Engineering & Structural Dynamics (EESD), 44(8), 2015, p1309–1324. DOI: 10.1002/eqe.2520.
78. Lin S-L, MacRae G.A, English R., Yeow T. Z, Dhakal R. P., 2015, “Building Contents Sliding demands in Elastically Responding Structures”, Engineering Structures, 86, pp. 182-191 . http://www.sciencedirect.com/science/article/pii/S014102961500005X
79. Borzouie, J, MacRae, GA, Chase, JG, and Rodgers, GW (2015). “Experimental Studies on Cyclic Performance of Column Base Weak Axis Aligned Asymmetric Friction Connection,” Journal of Constructional and Steel Research (JCSR), Vol 112, pp. 252-262, ISSN 0143-974X. http://www.sciencedirect.com/science/article/pii/S0143974X15001558
80. Ahmed S. M., Gunasekaran U. and MacRae G. A. (2015) Analytical Investigation on the Seismic Performance of Slabs in RC Frame Joints, Magazine of Concrete Research, Institution of Civil Engineers, London. 67(22), November, 2015, pp. 1179-1189, ISSN 0024-9831 | E-ISSN 1751-763X, http://www.icevirtuallibrary.com/doi/abs/10.1680/jmacr.14.00132
81. Chunhaviriyakul P., MacRae G. A., Anderson D., Clifton G. C., Leon R. T. "Suitability of CFT Columns for New Zealand Moment Frames", Bulletin of the NZ Society for Earthquake Engineering, 48(1), March 2015, pp 63-79.
82. Chase, JG, Boyer, F, Rodgers, GW, Labrosse, G and MacRae, GA (2015). “Linear and Nonlinear Seismic Structural Impact Response Spectral Analyses,” Advances in Structural Engineering, Vol 18(4), pp. 555-570, doi: 10.1260/1369-4332.18.4.555, ISSN: 1369-4332. http://multi-science.metapress.com/content/j72jt25603m02368/
83. Borzouie, J., MacRae, G.A., Chase, J.G., Rodgers, G.W., Xie, R., Golondrino, J.C. and Clifton, G.C. (2015) Cyclic Performance of Asymmetric Friction Connections with Grade 10.9 Bolts. The Bridge and Structural Engineer, Ing-IABSE, India, March, 45(1): 53-62. https://issuu.com/iabse.secretariat/docs/7_2015_march_vol_45_no_1
84. Kuang, A., Sridhar, A., Garven, J., Gutschmidt, S., Rodgers, G.W., Chase, J.G., Gavin, H.P., Nigbor, R.L. and MacRae, G.A. (2015) Christchurch Women's Hospital: Performance analysis of the base‐isolation system during the series of Canterbury earthquakes 2011‐2012. Journal of Performance of Constructed Facilities 10.1061/(ASCE)CF.1943‐5509.0000846: 04015096.
85. Ebrahimi Koopaee, M., Dhakal, R.P. and MacRae, G.A. (2015). Analytical Simulation of Seismic Collapse of RC Frame Buildings. Bulletin of the NZ Society for Earthquake Engineering 48(3): 157-169.
86. Moghaddasi, M., MacRae, G.A., Chase, J.G., Cubrinovski, M. and Pampanin, S. (2015) Seismic Design of Yielding Structures on Flexible Foundations. Earthquake Engineering and Structural Dynamics 44(11): 1805‐1821.
87. AbdolahiRad A., MacRae G. A., Yeow T. Z. and Bull D., “Seismic Behavior of Steel Buildings with Out-of-Plumb”, Earthquake Engineering and Structural Dynamics, 44(14), November 2015, p2575–2588, DOI: 10.1002/eqe.2598.
88. Borzouie, J, MacRae, GA, Chase, JG, Rodgers, GW and Clifton, C (2016). “Experimental Studies on Cyclic Performance of Column Base Strong Axis Aligned Asymmetric Friction Connections,” ASCE J. Structural Engineering, Vol 142(1), Article 04015078, 10-pages., ISSN: 0733-9445, doi: 10.1061/(ASCE)ST.1943-541X.0001327
89. Yeow T. Z.; MacRae G. A; Dhakal R. P; Lin S-L, Predicting The Maximum Total Sliding Displacement Of Contents In Earthquakes, Journal of Architectural Engineering, ASCE, 2016, 22(1): 04015013. DOI: 10.1061/(ASCE)AE.1943-5568.0000193.
90. Gholamhoseini A., Khanlou A., MacRae G. A, Scott A., Hicks S., Leon R., and Clifton G. C. (2016), “An Experimental Study on Strength and Serviceability of Reinforced and Steel Fibre Reinforced Concrete (SFRC) Continuous Composite Slabs”, Engineering Structures, 114 (2016) 171–180. http://www.sciencedirect.com/science/article/pii/S0141029616000924
91. Borzouie J., Chase J. G., MacRae G. A., Rodgers G. W. and Clifton C., "Spectral Assessment of the Effects of Base Flexibility on Seismic Demands of a Structure" Advances in Civil Engineering, Volume 2016 (2016), Article ID 3984149, 8 pages, http://dx.doi.org/10.1155/2016/3984149, http://www.hindawi.com/journals/ace/2016/3984149/abs/
92. Dhakal R., MacRae, G.A., Pourali A., and Paganotti, G. (2016) Seismic Fragility of Suspended Ceiling Systems used in NZ based on Component Tests, Bull. NZ Society for Earthquake Engineering, 49(1), March 2016, pp45-63. Special Issue on Seismic Performance of Non-Structural Elements (SPONSE).
93. Dhakal RP, Pourali A, Tasligedik AS, Yeow T, Baird A, MacRae G, Pampanin S, Palermo A., Seismic performance of non-structural components and contents in buildings: an overview of NZ research, Earthquake Engineering and Engineering Vibration 15(1):01 Mar 2016. http://dx.doi.org/10.1007/s11803-016-0301-9.
94. Kuang, A, Sridhar, A, Garven, J, Gutschmidt, S, Rodgers, GW, Chase, JG, Gavin, HP, Nigbor, RL and MacRae, GA (2016). "Christchurch Women's Hospital: Performance Analysis of the Base-Isolation System During the Series of Canterbury Earthquakes 2011-2012," ASCE Journal of Performance of Constructed Facilities, Vol 30(4), Article: 04015096, pp. 10-pages, ISSN: 0887-3828, doi: 10.1061/(ASCE)CF.1943-5509.0000846.
95. Chaudhari T. and MacRae G. A., “Gap Infill Material for Structural Seismic Application", SESOC Journal, 29(1), April 2016, pp94-102.
96. Ebrahimi Koopaee, M.; Dhakal, R., and MacRae, G. A., Effect of Ground Motion Selection Methods on Seismic Collapse Fragility of RC Frame Buildings, Earthquake Engineering & Structural Dynamics, Earthquake Engng Struct. Dyn. 2017, Published online in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/eqe.2891.
97. Rodgers G.W., Chase J.G., Causse R., Chanchi J. and MacRae G.A. “Performance and Degradation of Sliding Steel Friction Connections: Impact of Velocity, Corrosion Coating and Shim Material”, Journal of Engineering Structures, Vol. 141, 15 June 2017, pp 292–302, http://dx.doi.org/10.1016/j.engstruct.2017.02.070
98. Cook J., Rodgers G. R., Chase J. G., and MacRae G. A., Design and testing of ratcheting, tension-only devices for seismic energy dissipation systems, Journal of Earthquake Engineering, ID UEQE-2017-2709.R1. Accepted for publication 17 November 2017.
99. Ramhormozian, S., Clifton G. C., MacRae G.A., Davet G. P. (2017). “Stiffness-Based Approach for Belleville Springs use in Friction Sliding Structural Connections.” Journal of Constructional Steel Research (JCSR), JCSR4898, http://dx.doi.org/10.1016/j.jcsr.2017.07.009, Volume 138, November 2017, Pages 340-356.
100. Pourali A., Dhakal R. P., MacRae G. A. and Tasligedik A. S. “Fully-Floating Suspended Ceiling System: Experimental Evaluation of Structural Feasibility and Challenges”, Earthquake Spectra. https://doi.org/10.1193/092916EQS163M, Posted online on October 2017.
101. Gholamhoseini A., Khanlou A., MacRae G A., Hicks S., Scott A. and Clifton C. "Short-term behaviour of reinforced and steel fibre–reinforced concrete composite slabs with steel decking under negative bending moment", Advances in Structural Engineering, First Published November 10, 2017, http://journals.sagepub.com/doi/abs/10.1177/1369433217739710
102. Malek A., Scott A. Pampanin S., MacRae GA., “Post-event damage assessment of concrete using fluorescent microscopy technique”, Cement and Concrete Research, 102, December 2017, Pages 203-211 https://doi.org/10.1016/j.cemconres.2017.09.015.
103. Malek A., Scott A., Pampanin S., MacRae G. and Marx S. (2018) Residual capacity and permeability-based damage assessment of concrete under low-cycle fatigue. Journal of Materials in Civil Engineering, 30(6), https://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0002248
104. Malek A., Andisheh K., Scott A., Pampanin S., MacRae G., Palermo A., “Residual Capacity and Permeability-Based Damage Assessment of Concrete in Damaged RC Columns”, Journal of Materials in Civil Engineering, 30(6) https://ascelibrary.org/doi/10.1061/%28ASCE%29MT.1943-5533.0002312.
105. Yeow, T.Z., MacRae, G.A., and Dhakal, R.P. (2017). Wall Building Stiffness and Strength Effect on Content Sliding in Wellington Seismic Conditions. Earthquake Engineering and Structural Dynamics, 46(6), 1023-1042.
106. Yeow, T.Z., MacRae, G.A., Dhakal, R.P., and Bradley, B.A. Validating the Sliding Mechanics of Office-Type Furniture using Shake-Table Experiments. Bulletin of the New Zealand Society for Earthquake Engineering, 51(1), March 2018, p1-11.
107. Cook, J., G. W. Rodgers and G. A. MacRae (2018). "Design and Testing of Ratcheting, Tension-Only Devices for Seismic Energy Dissipation Systems." Journal of Earthquake Engineering: 1-22. https://doi.org/10.1080/13632469.2018.1441765
108. Rodgers, GW, Herve, R, MacRae, GA and Chase, JG (2018). “Dynamic Friction Coefficient and Performance of Asymmetric Friction Connections,” Structures, Vol 14, pp. 416-423, ISSN: 2352-0124. https://doi.org/10.1016/j.istruc.2017.09.003
108. Chanchi J., MacRae G. A., Chase J. G., Rodgers G. W. and Clifton G. C., 2018. Hysteretic Behaviour of Asymmetrical Friction Connections Using Brake Pads of D3923, Structures, 16, pp164-175. ISSN 2352-0124, DOI: https://doi.org/10.1016/j.istruc.2018.09.012, https://authors.elsevier.com/c/1Xq3W8MoIGippK.
109. Chanchí Golondrino, J.C., MacRae, G.A., Chase, J.G., Rodgers, G.W, Abu, A.K., Clifton, G.C. (2018). Asymmetric friction connections post-heating behaviour. Journal of Constructional Steel Research. Vol. 149, Oct. 2018, pp. 119 – 129. https://doi.org/10.1016/j.jcsr.2018.07.018
110. Yeow T. Z., Orumiyehei A., Sullivan T. J., MacRae G. A., Clifton G. C., Elwood K. J., “Seismic performance of steel friction connections considering direct-repair costs", Bulletin of Earthquake Engineering, December 2018, Volume 16, Issue 12, pp 5963–5993. https://link.springer.com/article/10.1007/s10518-018-0421-x
111. Chanchi J., MacRae G. A., Abu A. Chase J. G., Scott A. and Clifton, Steel Building Friction Connection Seismic Performance - Corrosion Effects, Structures, Structures 19 (2019) 96–109. https://doi.org/10.1016/J.ISTRUC.2018.11.008
112. Rad A. A., MacRae G. A., Hazaveh N., and Ma Q., “Shake Table Testing of a Low Damage Steel Building with Asymmetric Friction Connections”, Journal of Constructional Steel Research, 155 (2019), pp 129–143. https://doi.org/10.1016/j.jcsr.2018.12.013
113. Rad A. A., MacRae G. A. (2019): Displacement Estimation of Elastic Structures with Unbalanced Stiffness Using Energy Approach, Journal of Earthquake Engineering, 1-19. DOI: 10.1080/13632469.2019.1572038. Print version (2021), 25:6, 1112-1130.
114. Ramhormozian S., Khoo H-H., Davet G., Clifton G. C., MacRae G. A., “Experimental Studies on Belleville Springs use in the Sliding Hinge Joint Connection”, Journal of Constructional Steel Research (JCSR), 159 (2019), 81–94. https://doi.org/10.1016/j.jcsr.2019.03.031
115. Ramhormozian, S., Clifton, G. C., Latour, M., & MacRae, G. A. (2019). Proposed Simplified Approach for the Seismic Analysis of Multi-Storey Moment Resisting Framed Buildings Incorporating Friction Sliders. Buildings, 9(5), 130. Special Issue on Smart Solutions and Structural Systems for Seismic-Resistant Buildings. Abstract: https://www.mdpi.com/2075-5309/9/5/130, HTML Version: https://www.mdpi.com/2075-5309/9/5/130/htm, PDF Version: https://www.mdpi.com/2075-5309/9/5/130/pdf
116. Rezaeian H., Clifton G. C., MacRae G. A., Hogan L, and Lim J., "In-Plane Behaviour Of Composite Floor Slab Diaphragm Interfaces Under High Shear Demand", Journal of Steel Constructional Research, JCSR, Volume 162, November 2019, 105715. https://doi.org/10.1016/j.jcsr.2019.105715
117. Chanchi Golondrino J.C., MacRae G.A., Chase J.G., Rodgers G.W., Clifton G.C., Asymmetric Friction Connection (AFC) Design for Seismic Energy Dissipation, Journal of Constructional Steel Research, 157, 70-81, 10.1016/j.jcsr.2019.02.027.
118. Rad A. A., MacRae G. A., Hazaveh N. Ma Q. and Rodgers G., “Structural Straightening with Tension Braces Using Aftershocks – Shaking Table Study”, Soil Dynamics and Earthquake Engineering, Volume 123, August 2019, Pages 399-412. https://doi.org/10.1016/j.soildyn.2019.05.005
119. Tjahjanto, H.H., MacRae, G.A., Abu, A.K., Clifton, G.C., Beetham, T. and Mago, N. (2016) Design capacity of external diaphragm connections for square CFST columns. New Zealand Society for Earthquake Engineering, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 52, No. 3, September 2019, pp134-140.
120. Bruneau M. and MacRae G. A., (2019) Building Structural Systems in Christchurch's Post-Earthquake Reconstruction. Earthquake Spectra: November 2019, Vol. 35, No. 4, pp. 1953-1978. https://doi.org/10.1193/052818EQS126O
121. Chaudhari, T., MacRae G. A., Bull D., Clifton G. C., Hicks S. (2019). Experimental Behaviour of Steel Beam-Column Subassemblies with Different Slab Configurations, Journal of Constructional Steel Research (JCSR), 162, 105699. https://www.sciencedirect.com/journal/journal-of-constructional-steel-research/vol/162/suppl/C
122. Au E.V., MacRae G., Pettinga D., Deam B., Sadashiva V., Soleimankhani H., (2019). Seismic response of torsionally irregular single story structures, Bulletin of the New Zealand Society for Earthquake Engineering, 52(1), 44-53.
123. Rezaeian H., George Clifton G. C., MacRae G. A. and Lim J., “In-plane cyclic behaviour of composite floor slab diaphragm interfaces under high-shear demand”, Journal of Constructional Steel Research, 167 (2020), 105838. https://doi.org/10.1016/j.jcsr.2019.105838
124. Chanchi Golondrino J, C., MacRae G. A., Chase G., Rodgers G.,, Clifton G. C., Asymmetric Friction Connection Bolt Lever Arm Effects on Hysteretic Behaviour, Journal of Earthquake Engineering, 09 Mar 2020, https://doi.org/10.1080/13632469.2020.1733136
125. Zhang P., Huanian Zhu H.N., Lu X.L., Lu W.S. and MacRae G.A., “Vibration Analysis of Shallow Cable with Horizontal Spring and Dashpot at One End”, Engineering Structures, Volume 211, 15 May 2020, 110452, https://doi.org/10.1016/j.engstruct.2020.110452.
126. Tjahjanto H., MacRae G. A. and Abu A., Behaviour of Improved Direct-Welded Connections in Square CFST Column Moment Frames under Bidirectional Loading, Advanced Steel Construction, The Hong Kong Institute of Steel Construction, 16(2), pp156-169, June 2020. DOI:10.18057/IJASC.2020.16.2.7
127. Alizadeh S., MacRae G. A., Bull D., Clifton G. C., Composite Gravity Beams Subject to Slab Lateral Movement, Journal of Constructional Steel Research, Journal of Constructional Steel Research, Volume 171, August 2020, 106162. https://doi.org/10.1016/j.jcsr.2020.106162
128. Dong, W., Li, M., Lee, C.L., MacRae, G. and Abu, A., 2020. Experimental testing of full-scale glulam frames with buckling restrained braces. Engineering Structures, 222, p.111081. https://doi.org/10.1016/j.engstruct.2020.111081
129. Chanchi Golondrino J. C., MacRae G. A., Chase J. G., Rodgers G. W., and Clifton G. C. “Seismic behaviour of Symmetric Friction Connections for Steel Buildings’, Engineering Structures, 224, (1 Dec 2020), 111200. https://doi.org/10.1016/j.engstruct.2020.111200.
130. Cook J., Rodgers G.W., MacRae G.A., 2020, Design and Testing of Ratcheting, Tension-Only Devices for Seismic Energy Dissipation Systems, Journal of Earthquake Engineering, 24 92), p 328 – 349. 10.1080/13632469.2018.1441765. 2-s2.0-85042924622.
132. MacRae G. A., Lee C-L., Vazquez-Colunga S.Y., Cui J., Alizadeh S., Jia L.J., BRB System Design for Stability, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 54, No. 1, March 2021.
133. Arifin, F.A., Sullivan, T.J., MacRae, G. A., Kurata M., and Takeda, T. (2021) Lessons for loss assessment from the Canterbury earthquakes: a 22-storey building. Bulletin of Earthquake Engineering, 19(5), p2081-2104. https://doi.org/10.1007/s10518-021-01055-7.
134. Dong, W., Li, M., Lee, C.L. and MacRae, G., 2021. Numerical modelling of glulam frames with buckling restrained braces. Engineering Structures, 239, p.112338.https://doi.org/10.1016/j.engstruct.2021.112338
135. Soleimankhani, H., MacRae, G., and Sullivan T. 2021. The Oscillation Resistance Ratio (ORR) for Understanding Inelastic Response, Bulletin of the New Zealand Society for Earthquake Engineering, Ref: BNZSEE2017. Accepted for publication, 27 April 2021.
Indexed Published Fully Refereed Publications (Presented also at Conferences)
1. Khanlou A., MacRae G. A., Scott A., Hicks S., Clifton G. C., Leon R. T., “Composite Slab Crack Widths Considering Shrinkage and Gravity Loading”, Proceedings, International Conference on Composite Construction in Steel and Concrete 2013, CCVII, Palm Cove, Queensland, Australia, July 28–31, 2013. ISBN (PDF): 978-0-7844-7973-5, American Society of Civil Engineers. http://dx.doi.org/10.1061/9780784479735
2. MacRae G. A., Hobbs M., Bull D., Chaudhari T., Leon R., Clifton G. C., and Chase C., “Slab Effects on Beam-Column Subassemblies – Beam Strength and Elongation Issues”, Proceedings, International Conference on Composite Construction in Steel and Concrete 2013, CCVII, Palm Cove, Queensland, Australia, July 28–31, 2013. ISBN (PDF): 978-0-7844-7973-5, American Society of Civil Engineers. http://dx.doi.org/10.1061/9780784479735
3. Bruneau M. and MacRae G. A., "Reconstructing Christchurch: Quantitative Findings on Shift in Building Structural Systems", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 11-17, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.11
4. Vazquez S., Lee C.L., and MacRae G.A., "Effects of Out-of-Plane Displacements on Load Capacity of Gusset Plates in Buckling Restrained Braced Frames", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 892-899, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.892
5. Telford J., Sim A., MacRae G.A., and Clucas D.M., "Buckling Restrained Brace Deformation Measuring Device", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 900-907, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.900
6. Alizadeh S., MacRae G. A., Bull D. and Clifton C., "Floor Diaphragm In-Plane Modelling Using Elastic Truss Elements", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 549-556, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.549
7. Alizadeh S., MacRae G. A., Bull D. and Clifton C., "Beam Web-Side-Plate Connection Axial Performance", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 174-181, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.174
8. Tjahjanto H., MacRae G.A. and Abu A., "Bidirectional Behaviour of Unstiffened and Stiffened Direct-Welded Connections for Square CFST Columns", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 794-803, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.794
9. Cui J., Lee C.L. and MacRae G.A., "Finite Element Modelling of Buckling Restrained Braces under Combined In-Plane and Out-of-Plane Loading", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 908-915, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.908
10. Webb G., Kosinanonth K., Chaudhari T., Alizadeh S. and MacRae G.A., "Column Moment Demands from Orthogonal Beam Twisting", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 259-269, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.259
11. Tagawa H. and MacRae G.A.,, "Seismic Simulation of U.S. and Japanese Type Steel Moment-Resisting Frame Structures Using Practical FEM Macro Models", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 557-565, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.557
12. Rad A., MacRae G.A., Hazaveh N. K. and Ma Q. "Shake Table Testing of a Low Damage Steel Building with Asymmetric Friction Connections (AFC)", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 400-405, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.400
13. Koia R., Needham J., Alizadeh S., Scarry J. and MacRae G.A., "Beam Shear Connections", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 207-215, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.207
14. Xie R., Chanchi Golondrino J., MacRae G.A. and Clifton C., "Braced Frame Symmetrical and Asymmetrical Friction Connection Performance", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 216-223, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.216
15. Hatami M., MacRae G.A., Rodgers G. and Clifton C., "Numerical Study of Asymmetric Friction Connections (AFC) with Large Grip Length Bolts", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 600-608, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.600
16. MacRae G.A., Clifton C. and Bruneau M., New Zealand Research Applications of, and Developments in Low Damage Technology for Steel Structures, Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials Volume 763, Behaviour of Steel Structures in Seismic Areas, Edited by: Federico M. Mazzolani, Gregory A. MacRae and George Charles Clifton, 2018, pp 3-10. https://doi.org/10.4028/www.scientific.net/KEM.763.3
17. Saif K., Lee C.L., Yeow T. and MacRae G.A., "Seismic Ratchetting of Single-Degree-of-Freedom Steel Bridge Columns", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 295-300, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.295
18. Clifton G. C. and MacRae G. A., "Lessons from the Field; Steel Structure Performance in Earthquakes in New Zealand from 2010 to 2016", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 61-71, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.61
19. Ramhormozian S., Clifton C., MacRae G.A. and Khoo H., "The Sliding Hinge Joint: Final Steps towards an Optimum Low Damage Seismic-Resistant Steel System", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 751-760, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.751
20. Chaudhari T, MacRae G. A., Bull D., Clifton G. C., Hicks S., "Analytical Methodology to Predict the Beam Overstrength Considering the Composite Slab Effects", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 826-834, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.826
21. Malhotra R., Ndarowa C., MacRae G.A., Palermo A. and Broglio S., "Footfall Induced Vibration Response of a Base-Isolated Steel Building", Steel Structures in Seismic Areas (STESSA) Conference, Christchurch, 14-16 February 2018, Key Engineering Materials, Vol. 763, pp. 992-1001, 2018. https://doi.org/10.4028/www.scientific.net/KEM.763.992
22. Dhakal R. P., Rashid M., Bhatta J, Sullivan T. J., MacRae G. A., Clifton G. C., Jia L-J and Xiang P., Shake Table Tests of Multiple Non-Structural Elements in a Low – Damage Structural Steel Building, 4th International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), May 22-23, 2019, Pavia, Italy.
Conference Publications (Fully Reviewed)
1. MacRae G. A., Carr A. J. and Walpole W. R., "The Dynamic Behavior of Multistory Steel Frames", Proceedings, Eighth Japan Earthquake Engineering Symposium, Tokyo, 12-14 December 1990, pp. 1599-1604.
2. MacRae G. A. and Kawashima K., "Effect of Post-Elastic Stiffness on the Seismic Response of Single Degree of Freedom Structures", Proceedings, Japan Society of Civil Engineering Symposium on Earthquake Engineering, Tokyo, 31 August to 2 September 1991.
3. MacRae G. A., Nosho K. J., Stanton J. F. and Myojo T., “Carbon Fiber Retrofit of Rectangular RC Gravity Columns in Seismic Regions”, Proceedings, Third International Symposium on Non-Metallic (FRP) Reinforcement for Reinforced Concrete Structures, Sapporo, 14-16 October 1997.
4. Nosho K. J., MacRae, G. A. and Stanton J. F., “Performance of Reinforced Concrete Columns Retrofitted with Carbon Fiber Confinement”, Proceedings, 6th National Conference on Earthquake Engineering, Seattle, May 1998.
5. Stanton J. F., Owen L. M. and MacRae G. A., “Stress-Strain Properties of Confined Concrete”, Proceedings, 6th National Conference on Earthquake Engineering, Seattle, May 1998.
6. MacRae G. A., “Residual Displacements of Eccentrically Loaded Bridge Columns”, Proceedings, 6th National Conference on Earthquake Engineering, Seattle, May 1998.
7. Tagawa H. and MacRae G. A., “Seismic Response of 3-D Steel Structure with Bi-directional Columns”, Proceedings, STESSA Conference, Montreal, Canada, August 2000.
8. MacRae G. A., Unocic F. and Kramer S., “Foundation Effects on Structural Ductility Demands”, 7th National Conference on Earthquake Engineering, Boston, July 21-25, 2002.
9. Tagawa H. and MacRae G. A. “Near Fault Shaking Effects on Inelastic Single Degree of Freedom Oscillators”, 7th National Conference on Earthquake Engineering, Boston, July 21-25, 2002.
10. Kim J., Stanton J. F. and MacRae G. A. “Design Issues of Hybrid Frames”, 7th National Conference on Earthquake Engineering, Boston, July 21-25, 2002.
11. Kimura Y., MacRae G. A and Roeder C. W., “Effect of Column Flexural Stiffness on Braced Frame Performance”, 7th National Conference on Earthquake Engineering, Boston, July 21-25, 2002.
12. Tagawa H., MacRae G.A. and Lowes L.N., “Seismic Behaviour of Three Fundamental Framing Systems”, Fourth International Conference on the Behavior of Steel Structures in Seismic Areas (STESSA), Naples, June 2003.
13. Kim, J., Day S., Sugata M., Stanton J. and MacRae G, A., “Cyclic Load Testing of Precast Hybrid Frame Connections”, 13WCEE, Vancouver, August 2004.
14. Kim, J., Stanton J. and MacRae G, A., “Beam Growth in Reinforced Concrete Frames”, 13WCEE, Vancouver, August 2004.
15. Kimura Y. and MacRae G., “Effect of Continuous Column Flexural Characteristic on Braced Frame Displacements”, 13WCEE, Vancouver, August 2004.
16. Tagawa H., MacRae G., and Lowes L., “Evaluations of 1D Simple Structural Models for 2D Steel Frame Structures”, 13th World Conference on Earthquake Engineering, Vancouver, August 2004.
17. MacRae G. A. and Gunasekaran U., “A Concept for Consideration of Slab Effects on Building Seismic Performance”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 51, Napier, 2006.
18. MacRae G. A., Hyde K., Walpole W., Moss P., Hyland C., Clifton G. C. and Mago N., “Column Axial Shortening Effects in Steel Frames”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 36, Napier, 2006.
19. MacRae G. A., Ballantyne D., Stewart M., and Preuss J., “Seattle Fault Scenario – A Decision-Making Tool for Earthquake Risk”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 27, Napier, 2006.
20. MacRae G. A., “Decision Making Tools for Seismic Risk”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 28, Napier, 2006.
21. Tagawa H., Lowes L., MacRae G., Wada A., “Dynamic Instability By Link-Element Deformation”, Poster 318, 8th National Conference on Earthquake Engineering, San Francisco, EERI, Oakland, 2006.
22. Tagawa H., MacRae G., and Lowes L., “Probabilistic Evaluation of Seismic Performance of 3D One-way and Two-way Steel Moment Frame Structures”, STESSA, Yokohama, Japan, 14-17 August 2006.
23. Kimura Y. and MacRae G., “Effect of Column Flexural Characteristic on Seismic Behavior of Braced Frame with Fixed Column Base”, STESSA, Yokohama, Japan, 14-17 August 2006.
24. Gunasekaran U., MacRae G. A., Fenwick R., and Carr A. J. “Slab Effects on Building Seismic Performance” 19th Australasian Conference on Mechanics of Structures and Materials, ACMSM19, Christchurch 29 Nov – 1 Dec 2006.
25. Hyde K., MacRae G. A., Walpole W., Moss P., Hyland C., Clifton G. C. and Mago N., “Column Axial Shortening Effects in Steel Frames”, Pacific Structural Steel Conference, Wairakei, NZ, 2007, Paper No: 233.
26. Tagawa, H., MacRae G. A. and Lowes L., “Seismic Behavior and Dynamic Stability of 2D Steel Moment Frame Structures”, Pacific Structural Steel Conference, Wairakei, NZ, 2007.
27. Tagawa, H., MacRae G. A. and Lowes L., “Probabilistic Evaluation of Seismic Demand on 3D One-Way and Two-Way Steel Moment Frame Structures”, Pacific Structural Steel Conference, Wairakei, NZ, 2007.
28. MacRae G. A., MacKinven H., Clifton G. C., Pampanin S., Walpole W. R. and Butterworth J. “Tests Of Sliding Hinge Joints For Steel Moment Frames”, Pacific Structural Steel Conference, Wairakei, NZ, 2007.
29. MacRae G. A., Clifton G. C. and Mago N., “Overstrength Effects Of Slabs On Demands On Steel Moment Frames”, Pacific Structural Steel Conference, Wairakei, NZ, 2007, Paper No. 254.
30. Peng B. H. H., MacRae G. A., Walpole W. R., Moss P., Dhakal R., Clifton G. C. and Hyland C., “Evaluation of Lay’s Equation for Plastic Hinge Location in Steel Columns”, Pacific Structural Steel Conference, Wairakei, NZ, 2007.
31. Clifton G. C., MacRae G. A., Mackinven H., Pampanin S. and Butterworth J., “Sliding Hinge Joints and Subassemblies for Steel Moment Frames”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 19, Palmerston North, 2007.
32. Sadashiva V. K., MacRae G. A., Deam B. L. & Maunoury C., “Vertical Mass Irregularity Effects on the Seismic Performance of Shear Buildings”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 59, Palmerston North, 2007.
33. Peng B. H. H., MacRae G. A., Walpole W. R., Moss P. J. and Dhakal R. and Clifton G. C., “Location of Plastic Hinges in Columns of Steel Frames”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Paper 20, Palmerston North, 2007.
34. Bradley B. H. H., Dhakal R., Mander J. B and MacRae G. A., “Improved Hazard Model for Performance-Based Earthquake Engineering”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Palmerston North, 2007.
35. Mackinven H., MacRae G. A., Pampanin S., Clifton G. C. and Butterworth J., “Sliding Hinge Joint Tolerances for Steel Moment Frames”, Proceedings of the 8th Pacific Conference On Earthquake Engineering (PCEE), Paper 200, Singapore, 05 – 07 December 2007.
36. Sadashiva V. K., MacRae G. A. and Deam B. L., “Vertical Mass Irregularity Effects On The Seismic Performance Of Shear Buildings”, Proceedings of the 8th Pacific Conference On Earthquake Engineering (PCEE), Paper 043, Singapore, 05 – 07 December 2007.
37. Sadashiva V. K., G.A. MacRae, B.L. Deam & R. Fenwick, “Determination of Acceptable Structural Irregularity Limits for the Use of Simplified Seismic Design Methods”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, 2008.
38. Bradley B. A., Dhakal R. P., Cubrinovski M., MacRae G. A., and Lee D. S., “Seismic Loss Estimation for Efficient Decision Making”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, 2008.
39. Sugioka, K., MacRae, G. A., Saleh, M., and Beamish, M. "Lifetime Evaluation of Orthotropic Steel Bridge Decks." Proc. Orthotropic Bridge Conference 2008, Sacramento, USA, August 2008, 276-289.
40. Tagawa, H.; MacRae, G.; Lowes, L.; Wada, A. (2008) Analytical Simulation of Progressive Collapse of Perimeter Frames Due to Out-of-Plane Behavior, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, Paper ID: 05-05-0087.
41. Sadashiva, Vinod.K.; MacRae, Gregory A.; Deam, Bruce.L. (2008) Determination of Irregularity Limits, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, Paper ID: 05-01-0513.
42. Rodgers, Geoffrey W; Dhakal, Rajesh P; Chase, Geoff; Mander, John B; MacRae, Gregory; Mander, Thomas J; Solberg, Kevin M (2008) Investigation of Rocking Connections Designed for Damage Avoidance with High Force-to-Volume Energy Dissipation, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, Paper ID: 11-0043.
43. Bradley, Brendon A.; Dhakal, Rajesh P.; Cubrinovski, Misko; MacRae, Gregory A. (2008) Prediction of Spatially Distributed Seismic Demands in Structures, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, Paper ID: 05-01-0176.
44. MacRae, G. A.; Au, E.; Pettinga, D.; Deam, B.; Sadashiva, V., (2008) A Simple Design Method for Yielding Structures Subject to Torsion, 14th World Conference on Earthquake Engineering, Beijing, China, 12-17 October, Paper ID: 05-01-0514.
45. Nayyerloo M., Chase J. G., MacRae G. A. and Chen X. Q. “Structural Health Monitoring using Adaptive LMS Filters”, 15th International Conference on Mechatronics and Machine Vision in Practice (M2VIP'08), Auckland, New Zealand, 2-4 December, CD-ROM, 6-pages, 2008.
46. Rodgers, G.W., Mander, T.J., Chase, J.G., MacRae, G., Dhakal, R.P. and Mander, J.B. (2008). “Steel Beam-Column Connections Designed For Damage Avoidance Utilising High Force-To-Volume Dampers,” 20th Australasian Conf on Mechanics of Structures and Materials (ACMSM), December 2-5, Toowoomba, Australia, 6-pages.
47. Bradley B., Cubrinovski M., Dhakal R. and MacRae G., “Probabilistic Seismic Performance Assessment of a Bridge-Foundation-Soil System”, NZ Society for Earthquake Engineering Conference, Christchurch, April, 2009.
48. Nayyerloo M., Chase G., Chen X. Q., MacRae G. and Moghaddasi M. “Permanent Deflection Identification of Non-linear Structures Undergoing Seismic Excitation Using Adaptive LMS Filters”, NZ Society for Earthquake Engineering Conference, Christchurch, April 2009.
49. MacRae G. A, Clifton G. C., and Butterworth J. W., “Some Recent New Zealand Research on Seismic Steel Structures”, STESSA, Philadelphia, August 2009. Taylor & Francis Group, London, ISBN 978-0-415-56326-0.
50. Nayyerloo, M., Chase, J.G., MacRae, G.A. and Chen, X.Q. (2009) “Cost Effective Computer Vision Based Structural Health Monitoring using Adaptive LMS Filters”. Stanford University, Stanford, CA, USA: 7th International Workshop on Structural Health Monitoring, 9-11 Sep 2009.
51. Bradley, B.A., Cubrinovski, M., Dhakal, R.P. and MacRae, G.A. (2009) Probabilistic seismic performance and loss assessment of a bridge-foundation-soil system. Auckland, New Zealand: International Workshop on Soil-Foundation-Structure-Interaction, 26-27 Nov 2009. In Soil-Foundation-Structure Interaction, 211-228.
52. Rodgers, GW, Chase, JG, MacRae, GA, Bacht, T, Dhakal, RP and Desombre, J (2009). “Analytical MDOF modelling of the effects of HF2V damping devices on the seismic performance of the SAC3 building”, 13th Asia-Pacific Vibrations Conference (13APVC), Christchurch, New Zealand, November 22-25.
53. Sadashiva V. K., MacRae G. A. and Deam B. L., “Simple methods to evaluate structural irregularities effects”, NZ Society for Earthquake Engineering Conference, Wellington, April 2010, 12.
54. Nayyerloo M., Chase G., Chen X. Q., Malherbe H., and MacRae G. A., “Seismic Structural Displacement Measurement using a High-Speed Line-Scan Camera: Experimental Validation”, NZ Society for Earthquake Engineering Conference, Wellington, April 2010, 10.
55. MacRae G. A., Myint U. T, and Jain S. K., “Steps in earthquake proofing a country:- a case study of Myanmar”, NZ Society for Earthquake Engineering Conference, Wellington, April 2010, 32.
56. Tagawa H., MacRae G. A., Lowes L. “Continuous Column Effects on Seismic Response and Stability of U.S. Steel Moment-frame Structures”, Proceedings of The 12th Japan-Korea-Taiwan Joint Seminar on Earthquake Engineering for Building Structures (SEEBUS 2010), pp.103-112, Kaohsiung, Taiwan, November 26-27, 2010.
57. Sadashiva V., MacRae G. A., Deam B. L., “Building Regularity Provisions for Seismic Design of Structures”, 14th European Conference on Earthquake Engineering, 30 Aug-3 Sep. 2010 Skopje, Macedonia, ID: 1351.
58. Sadashiva V., MacRae G. A., Deam B. L., “Seismic Response of Structures with Coupled Vertical Stiffness-Strength Variations”, 14th European Conference on Earthquake Engineering, 30 Aug-3 Sep. 2010 Skopje, Macedonia, ID: 1352.
59. MacRae G. A. and Clifton G. C., New Technology Applications, Recent Developments and Research Directions for Seismic Steel Structures in New Zealand, Asian Conference on Earthquake Engineering, Bangkok, Thailand, December 2010.
60. Rodgers G. W., Chase J. G., MacRae G. A., Bacht T., Dhakal R. P., and Desombre J., “Influence of HF2V Damping Devices on the Performance of the SAC3 Building Subjected to the SAC Ground Motion Suites”, 9USN-10CCEE, Toronto, July 25-29, 2010.
61. MacRae G. A., Hair J, and Dhakal, R., “Ceiling Damage in the 2010 Canterbury Earthquake”, Joint 8th Center for Urban Earthquake Engineering (CUEE) and 8th International Conference on Earthquake Engineering (ICEE) Conference Proceedings, March 7-8, 2011, Tokyo Institute of Technology, Tokyo, Japan.
62. Sato Y., MacRae G. A., Dhakal R. P. and Motoyui S., “Seismic Fragility of Japanese Ceiling Systems”, 8CUEE Conference Proceedings, 8th International Conference on Urban Earthquake Engineering, March 7-8, 2011, Tokyo Institute of Technology, Tokyo, Japan.
63. Paganotti G., Dhakal R. P. and MacRae G. A. “Development of Typical Ceiling System Seismic Fragilities”, Structural Engineering World Conference, Lake Como, Italy, April 2011.
64. Labrosse G., Kujikis A., Chase J. G, Cole G. , MacRae G. A. and Rodgers G. W., “Bridge Structure Impact Modelling”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 073.
65. Singh J., MacRae G. A., Dhakal R. P. and Pampanin S. “Building Seismic Ceiling Fragility using Spectral Acceleration”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 063.
66. Sato Y., Motoyui S., MacRae G. A. and Dhakal R. P. “Fragility of Japanese Ceiling Systems”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 086.
67. Yu P., Gutschmidt S. and MacRae G. A., “Modelling of Rigid Rocking of Structures during Earthquake Using Linear Functions”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 076.
68. Khoo H-H., Clifton G. C., Butterworth J., C.D. Mathieson C. D. and MacRae G. A., “Development of the Self-Centering Sliding Hinge Joint”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 106.
69. Chase G. J, Rodgers G. R., Corman S. and MacRae G. A., “Development and Spectral Analysis of an Advanced Control Law for Semi-Active Resetable Devices”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 135.
70. Roland T., Rodgers G.W., Chase J.G. & MacRae G.A., “Spectral analysis and assessment of a net-zero base-shear energy dissipation approach for seismic energy mitigation”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 143.
71. Corman S., Chase G. J, MacRae G A. and Rodgers G. R. “ Active Valve Control for Controlled Energy Release in Non-Linear Semi-Active Devices”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 142.
72. MacRae G. A., “The Continuous Column Concept – Development and Use”, Proceedings of the Ninth Pacific Conference on Earthquake Eng. (PCEE), Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 083.
73. Khanlou A., Holden M., Scott A., Saleh M., MacRae G., Hicks S. and Clifton G. C., “Performance of Concrete Slabs with Different Reinforcing”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 072.
74. Yeow T., MacRae G., Sadashiva V. and Kawashima K., “Dynamic Stability and Design of Cantilever Bridge Columns”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Oral presentation. Paper 097.
75. Labise C. C., Rodgers G.W., MacRae G. A., & Chase J.G. “Violating Capacity Design in Structures with Viscous Damping and Hysteretic Damping”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 092.
76. Lu A.Y-C. and MacRae G. A. “Residual Stress Effects on the Seismic Performance of Low-Rise Steel Frames”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 079.
77. Masuno T., MacRae G.A., Sadashiva V.K. and Wada A., “Response of Out-of-Plumb Structures in Earthquake”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 061.
78. Sadashiva V.K., MacRae G.A., and Deam B., “A Mechanics Based Approach to Quantify Diaphragm Flexibility Effects”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 114.
79. Paganotti G., MacRae G.A., and Dhakal R. P., “Development of Typical NZ ceiling System Seismic Fragilities”, Proceedings of the Ninth Pacific Conference on Earthquake Engineering, Building an Earthquake-Resilient Society, 14-16 April, 2011, Auckland, New Zealand. Poster presentation. Paper 116.
80. Masuno T., MacRae G.A., Sadashiva V.K. and Wada A., “Effect Of Building Out-Of-Straightness On Seismic Response”, Sixth International Conference of Seismology and Earthquake Engineering (SEE6), Tehran, Iran, 16-18 May, 2011.
81. Yeow T., MacRae G., Sadashiva V. and Kawashima K., “Design And Dynamic Stability Of Cantilever Bridge Columns”, Sixth International Conference of Seismology and Earthquake Engineering (SEE6), Tehran, Iran, 16-18 May, 2011.
82. MacRae G. A. “The 2010 Canterbury Earthquake”, Sixth International Conference of Seismology and Earthquake Engineering (SEE6), Tehran, Iran, 16-18 May, 2011.
83. MacRae G. A. “New Zealand School Safety”, Sixth International Conference of Seismology and Earthquake Engineering (SEE6) Workshop on the Seismic Retrofit of Schools, Tehran, Iran, 17-18 May, 2011. Invited Keynote Lecture. http://www.see6.ir/index.php?do=static&page=keynotes.
84. MacRae G. A. and Dhakal, R. P. “Lessons from the February 2011 M6.3 Christchurch Earthquake”, Sixth International Conference of Seismology and Earthquake Engineering (SEE6) Workshop on the Seismic Retrofit of Schools, Tehran, Iran, 17-18 May, 2011. Invited Keynote Lecture. http://www.see6.ir/index.php?do=static&page=keynotes.
85. Dastourian Jamnani F., Hosseini Khashaheiran F., Tajalli M., MacRae G. Evaluation of Near-Fault Ground Motion Effects on frames with CFST Columns and Steel Beams, 10th International Conference on Advances in Steel Concrete Composite and Hybrid Structures (ASCCS 2012), Singapore from 2-4 July 2012, Paper ID: 221. Abstract accepted for presentation.
86. MacRae G.A., Lu A., Masuno T., Sadashiva V., Ziemian R., Wada A., Clifton G.C., Residual Stress and Out-of-Plumb Effects on Steel Column Seismic Behaviour, STESSA Conference, Santiago, Chile, January 2012.
87. Khoo H-S, MacRae G. A., Clifton G.C, Butterworth J. W., Shim and bolt size effects on the Asymmetric Friction Connection, STESSA Conference, Santiago, Chile, January 2012.
88. Chanchí, J. C., MacRae, G.A., Chase, J.G., Rodgers, G.W., and Clifton, G.C., Methodology for quantifying seismic sustainability of steel framed structures, STESSA Conference, Santiago, Chile, January 2012.
89. Chanchí, J. C., MacRae, G.A., Chase, J.G., Rodgers, G.W., and Clifton, G.C. Behaviour of HF2V devices and possible applications on steel structures. STESSA Conference, Santiago, Chile, January 2012.
90. Chanchí, J. C., MacRae, G.A., Chase, J.G., Rodgers, G.W., Clifton, G.C, and Munoz, A. Design considerations for braced frames with asymmetrical friction connections (AFC). STESSA Conference, Santiago, Chile, January 2012.
91. Ikhlas S. Sheet, Umarani, C. and MacRae, G. A. (2011). An Analytical Model for the Analysis of Steel Beam Column Connections under Seismic Loading”, International Conference on Earthquake Analysis and Design of Structures (EQADS 2011), December 1-3, 2011, PSG College of Technology, Coimbatore, India.
92. Ahmed, S. M., Umarani, C. and MacRae, G. A. (2011). “Effect of slab and transverse beam on R.C. beam column joint”, International Conference on Earthquake Analysis and Design of Structures (EQADS 2011), December 1-3, 2011, PSG College of Technology, Coimbatore, India.
93. Ahmed S. M., Gunasekaran U., and MacRae G. A., “A Parametric Study of R.C. Slab in Beam-Column Connection under Cyclic Loading”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 58.
94. Dantanarayana H., MacRae G. A., Dhakal R. P., Yeow T. Z. “Quantifying building engineering demand parameters in seismic events”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 50.
95. Miranda B., MacRae G. A., Beyer K., Yeow T. Z., “Torsional considerations in building seismic design”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 55.
96. English, R., MacRae, G.A. and Dhakal, R.P. (2012) Hysteretic Influence on Earthquake Induced Sliding Damage of Contents. Christchurch, New Zealand: New Zealand Society for Earthquake Engineering Annual Conference (NZSEE2012), 13-15 Apr 2012. Paper 56.
97. Lin S-L, MacRae G.A, English R., Yeow T. Z, Dhakal R. P. “Contents sliding response spectra”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 63.
98. Boyer F., Labrosse G., Chase J.G., Rodgers G.W., MacRae G.A., Impact mechanics, damage and building pounding: The effect of co-efficient of restitution, structural yielding and gap ratio, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 87.
99. Sheng-Lin Lin S-L., Wu A-C, Lin P-C, Tsai K-C, MacRae G. A. “Development and implementation of buckling restrained braces in Taiwan”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 94.
100. Khoo H-H., Clifton G. C, Butterworth J. and MacRae G. A. “Experimental testing of the self-centring sliding hinge joint”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012, Paper 23.
101. Kato F., Rodgers G.W., MacRae G.A., Chase J.G. “Spectral design analysis of sliding hinge joints and HF2V devices for seismic dissipation”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 89.
102. Khanlou A., MacRae G. A., Scott A. N., Hicks S. J. and Clifton G. C. Shear Performance of Steel Fibre Reinforced Concrete, Australasian Structural Engineering Conference, Perth, Australia, July 2012. Reference Number: WC0088.
103. Yeow T.Z., MacRae G.A., Dhakal R.P. & Bradley B.A., "Seismic Sustainability Assessment of Structural Systems: Frame or Wall Structures?”, World Conference on Earthquake Engineering, Lisbon, Portugal, Paper number 1242. August 2012. Oral presentation.
104. Boyer F., Labrosse G., Chase J.G., Rodgers G.W. & MacRae G.A., 2012., “Effects of Co-efficient of Restitution, Structural Yielding and Gap Ratios on the Impact Mechanics of Building Pounding, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, Paper number 1732. August 2012. Poster presentation.
105. Simon V., Labise C., Rodgers G.W., Chase J.G. & MacRae G.A., “Inclusion of a Sacrificial Fuse to Limit Peak Base-Shear Forces During Extreme Seismic Events in Structures with Viscous Damping”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, Paper number 1734. August 2012. Poster presentation.
106. Khoo H. H., Clifton G. C., Butterworth J. W. & MacRae G. A., “Developments on the Sliding Hinge Joint”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, August 2012. Paper number 1766.
107. Chanchí Golondrino J., MacRae G.A., Chase J.G. & Rodgers G.W. and Clifton G. C., “Clamping Force Effects on the Behaviour of Asymmetrical Friction Connections (AFC)”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, August 2012. Paper number 1911. Poster presentation.
108. Chanchí Golondrino J., Chase J.G. & Rodgers G.W. MacRae G.A., and Clifton G. C., “Velocity Effects on the Behaviour of High-Force-to-Volume Lead Dampers (HF2V) Using Different Shaft Configurations”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, August 2012. Paper number 1930. Poster presentation.
109. Clifton G.C., Nashid H., Ferguson G., Hodgson M. and Seal C., Bruneau M., MacRae G.A. and Gardiner S., “Performance of Eccentrically Braced Framed Buildings In The Christchurch Earthquake Series of 2010/2011”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, August 2012. Paper number 2502.
110. Dantanarayana H.N., MacRae G.A., Dhakal R. P., Yeow T.Z. & S.R. Uma, “Quantifying Building Engineering Demand Parameters in Seismic Events”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, August 2012. Paper number 3424. Poster presentation.
111. Lin S.L., MacRae G.A., Dhakal R.P., & Yeow T. Z., “Contents Sliding Response Spectra”, 14 World Conference on Earthquake Engineering, Lisbon, Portugal, August 2012. Paper number 3601. Poster presentation.
112. Gardiner S., Clifton G. C., and MacRae G. A., 2012. “Performance Damage Assessment and Repair of a Multistorey Eccentrically Braced Framed Building Following the Christchurch Earthquake Series”, SESOC NZ Conference, Auckland, 2-3 November 2012.
113. Puthanpurayil, A. M., Dhakal R. P., MacRae G. A., Mukai D., “Nonlinear Frequency Domain Analysis (NFDA) - An updated FRF approach for nonlinear dynamic analysis of structures”, ASEA-SEC-1, The First Australasia and South-East Asia Structural Engineering and Construction Conference, The International Structural Engineering and Construction Society (ISEC), Perth, Australia, Nov 28-Dec 2, 2012.
114. MacRae G. A., “Low Damage Construction–Some Systems Issues”, 10CUEE Conference Proceedings, 10th International Conference on Urban Earthquake Engineering (10CUEE), March 1-2, 2013, Tokyo Institute of Technology, Tokyo, Japan.
115. Dhakal, R. P., and MacRae G. A., “Ceiling Systems Design and Installation Lessons from the Canterbury Earthquakes”, 10CUEE Conference Proceedings, 10th International Conference on Urban Earthquake Engineering (10CUEE), March 1-2, 2013, Tokyo Institute of Technology, Tokyo, Japan.
116. Yeow T.Z., MacRae G.A., Dhakal R.P., Bradley B.A., “Probabilistic seismic indoor injury estimation”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper 6.
117. Yeung S., Zhou H., Khoo H.H., Clifton G.C., MacRae G.A., Sliding shear capacities of the Asymmetric Friction Connection, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper 27.
118. Uma S.R., Dhakal R.P., MacRae G.A., “Implementation of Low Damage Construction: What are the Challenges?”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper 52.
119. Herve R., Rodgers G.W., Chase J.G., Chanchi J., MacRae G.A., Clifton G.C., Dynamic Friction Co-efficient of Asymmetrical Friction Connections (AFC), New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper 55.
120. Koopaee M.E., Dhakal R.P., Bradley B.A., MacRae G.A., “Assessment of Collapse Capacity of RC Buildings Based on Fiber-element Modelling”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper 58.
121. Nashid H., Ferguson W.G., Clifton G.C., Hodgson M., Seal C., MacRae G.A., “Investigate the relationship between hardness and plastic strain in cyclically deformed structural elements”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper P7.
122. Lin S.L., MacRae G.A., Dhakal R.P., Yeow T.Z., “Building Contents Sliding During Earthquakes”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper P25.
123. Chanchí J., MacRae G.A., Chase J.G., Rodgers, G.W., Clifton G.C. “Applications of brake pads on Asymmetrical Friction Connections (AFC)”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper P31.
124. Borzouie J., MacRae G.A., Chase J.G., Rodgers G.W., Clifton C.G., “Effect of base flexibility on demands of the structure”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper P32.
125. Causse R., Rodgers G.W., Chase J.G., Chanchi J., MacRae G.A., “Initial and Degraded Performance of Sliding Steel Friction Connections - Velocity Effects, Corrosion Coatings and Shim Materials”, New Zealand Society of Earthquake Engineering Conference, Wellington, 26-28 April 2013. Paper P48.
126. Chanchi Golondrino J., MacRae G.A., Chase J.G., Rodgers G.W., Clifton G.C., “Hysteretic Behavior of Symmetrical Friction Connections (SFC) Using Different Steel Grade Shims”, The Pacific Structural Steel Conference (PSSC 2013), Singapore, 8-11 October 2013.
127. Chanchí Golondrino, J., MacRae, G.A., Abu, A.K., Chase, J.G., Rodgers, G.W., Fu, B. and Clifton, G.C. (2013) Post-Fire Hysteretic Behavior of Asymmetrical Friction Connections. Singapore: 10th Pacific Structural Steel Conference (PSSC 2013), 8-11 Oct 2013. 548-553. http://dx.doi.org/10.3850/978-981-07-7137-9_194.
128. Nashid H., Ferguson W.G. Seal C.K., Clifton G.C., Hodgson M.A., MacRae G.A. and Choi J.H. “Non-Destructive Hardness Testing Method to Determine the Amount of Plastic Strain in Cyclically Deformed Structural Steel Elements”, The Pacific Structural Steel Conference (PSSC 2013), Singapore, 8-11 October 2013. Paper ID: 82
129. Iihoshi C., MacRae G.A., Rodgers G.W., Chase J.G., Viability of Slab Sliding System for Single Story Structure, International Conference on Earthquake Engineering (ICEE 2014), Barcelona, Spain, February, 27-28, 2014. 14SP020066.
130. Chaudhari T., MacRae G., Bull D., Chase G., Hobbs M., Clifton C., Hicks S., “Composite slab effects on beam-column subassemblies: Further development”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O6.
131. Chanchi Golondrino J., Xie R., MacRae G., Chase G., Rodgers G. & Clifton C., “Low Damage Braces Using Asymmetrical Friction Connections (AFC)”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O8.
132. Borzouie J., MacRae G, Chase G. J., and Clifton C., “Experimental Studies On Cyclic Behaviour Of Steel Base Connections Considering Anchor Bolts Post Tensioning”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O12
133. Cowie K., Fussell A., Clifton C, MacRae G. & Hicks S. “Seismic Design Of Composite Metal Deck And Concrete-Filled Diaphragms – A Discussion Paper”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O20.
134. Yeow T, MacRae G, Dhakal R. & Bradley B. “Preliminary Experimental Verification Of Current Content Sliding Modelling Techniques”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O67.
135. Pourali Bejarbaneh A, Dhakal R. & MacRae G., “Seismic Performance Of Suspended Ceilings: Critical Review Of Current Design Practice”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O68.
136. Jones A., C Lee C., MacRae G. & C Clifton C. “Review Of Buckling Restrained Brace Design And Behaviour”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper O87.
137. Abdolahirad A., MacRae G.A., Bull D. & Yeow T.Z., “Seismic Evaluation Of Buildings With Out-Of-Straightness”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper P1.
138. Ramhormozian S., Clifton G.C. & MacRae G.A., “The Asymmetric Friction Connection With Belleville Springs In The Sliding Hinge Joint”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper P27.
139. Tork Ladani F., MacRae G., Chase G. & Clifton C., “Effects Of Column Splice Properties On Seismic Demands In Steel Moment Frames”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper P33.
140. Riley-Smith H., Cain E.S., Yeow T. Z., MacRae G. A. and Dhakal R., “Building Content Sliding Demand – Analytical Studies Of Contents In Elastic, MDOF Structures”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper P36.
141. Chen A., Lo J.O.C., Lee C-L., MacRae G.A. & Yeow T.Z., “Vertical Acceleration And Torsional Effects On The Dynamic Stability And Design Of C-Bent Columns”, New Zealand Society of Earthquake Engineering Conference, Aotea Centre, Auckland, 21-23 March 2014. Paper P37.
142. MacRae G. A., Chanchi J., and Yeow T., “What Structure is Best?”, Australian Structural Engineering Conference (ASEC), 9 July to Friday 11 July 2014, Auckland, PN:177.
143. Yeow, T.Z., MacRae, G.A., Dhakal, R.P. and Bradley, B.A. (2014) Experimental studies on the sliding behavior of building contents. Anchorage, AK, USA: 10th US National Conference on Earthquake Engineering (NCEE10), 21-25 Jul 2014. 10pp.
144. MacRae, G.A., Better Structures, Structural Engineering Frontier Conference March 18-19, 2015, Suzukake-Dai Campus, Tokyo Institute of Technology, Yokohama, Japan.
145. Cook J., Rodgers G.W., MacRae G.A. & Chase J.G., (2015). “Development of a ratcheting, tension-only fuse mechanism for seismic energy dissipation”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April.
146. Pourali A., Dhakal R. P. & MacRae G. A. (2015). “Shake table tests of perimeter-fixed type suspended ceilings”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April.
147. Chanchi Golondrino J., Xie R., MacRae G. A., Chase G., Rodgers G. and Clifton G. C. (2015). “Low damage brace using a Symmetrical Friction Connection (SFC) detail”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April.
148. Ramhormozian S., Clifton G. C., MacRae G. A., Khoo H.-H., (2015). “The High Strength Friction Grip Property Class 8.8 Bolts: Variability of Installed Tension and Potential Resulting Effects on the Friction-type Connections’ Behaviour”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April.
149. Malek A., Scott A., Pampanin S., MacRae G. A. (2015). “Assessment of Post-Earthquake Damage in RC Elements Using Low-Invasive Techniques”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April.
150. Ainsworth J. B., Conlan C. J., Clifton G.C.and MacRae G.A. (2015). “Influence of Column Base Rotational Stiffness and Non-Structural Elements on Moment Resisting Steel Frame Building Response to Severe Earthquakes”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April.
151. Yeow T.Z., MacRae G.A. & Dhakal R.P. (2015). “Incorporating content sliding into seismic building performance assessments”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April. PAPER and POSTER
152. MacRae G. A., Clifton G. C., “NZ Research on Steel Structures in Seismic Areas”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p44-58. (Keynote Address)
153. Chanchi Golondrino J., Xie R., MacRae G.A., Chase G., Rodgers G. and Clifton C. Braced Frame Using Asymmetrical Friction Connections (AFC), 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p186-193.
154. Chanchi Golondrino J., MacRae G.A., Chase G., Rodgers G. and Clifton C.. Velocity Effects on the Behaviour of Asymmetrical Friction Connections (AFC), 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p631-638.
155. Hatami M., Borzouie J., MacRae G.A., Yekrangnia M., Abubakar S. “Finite Element Analysis of Column Base Weak Axis Aligned Asymmetric Friction Connection (WAFC)”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p504-511.
156. Borzouie J., MacRae G.A., Chase J.G., Rodgers G.W., Clifton G.C. (2015) “Column Base Weak Axis Aligned Asymmetric Friction Connection Cyclic Performance” , 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3 p512-519.
157. Tjahjanto H.H., MacRae G.A., Abu A.K., Clifton G.C., Beetham T. and Mago N., (2015), Behaviour of External Diaphragm Connections for Square CFST Columns under Bidirectional Loading, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p520-527.
158. Ramhormozian S., Clifton G. C., MacRae G. A., Khoo H.-H., “Improving the Performance of the Sliding Hinge Joint using Belleville Springs”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p549-557.
159. Ramhormozian S., Clifton G. C., MacRae G. A., Khoo H.-H., “The Optimum Use of Belleville Springs in the Asymmetric Friction Connection”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p558-565.
160. Tork Ladani F., MacRae G. and Chase G. (2015). Effects of Column Splice Location on Seismic Demands in Steel Moment Frames Considering Splice Flexibility, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p794-801.
161. Chaudhari T. D., MacRae G. A., Bull D., Chase G., Hicks S., Clifton G. C. and Hobbs M.. (2015). Composite Slab Effects on Beam-Column Subassembly Seismic Performance, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p802-809.
162. Djojo G. S., Clifton G. C, Henry R. S. and MacRae G. A. (2015) Experimental Testing of a Double Acting Ring Spring System for Use in Rocking Steel Shear Walls, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3.
163. Yeow T. Z., MacRae G. A., and Dhakal R, (2015). Effect of Strength and Stiffness on Single-Storey Buildings on Content Sliding Response in Earthquakes, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p1047-1054
164. Leung H.K., Clifton G. C., Khoo H.H., and MacRae G. A.. “Experimental Studies of Eccentrically Braced Frame with Rotational Bolted Active Links”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p1055-1062.
165. Abdolahirad A., MacRae G. A., Yeow T. Z. and Bull D. “Earthquake Sequence Effect on Steel Building”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p1063-1069.
166. Djojo G. S., Clifton G. C., Henry R. S. and MacRae G. A., “Experimental Testing of a Double Acting Ring Spring System for Use in Rocking Steel Shear Walls”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p1245-1252.
167. MacRae G. A., Clifton G. C., Bruneau M., Kanvinde A. and Gardiner S., “Lessons from Steel Structures in Christchurch Earthquakes”, 8th International Conference on Behavior of Steel Structures in Seismic Areas, STESSA, Shanghai, China, July 1-3, 2015, p1474.
168. Iihoshi C., MacRae G.A., Rodgers G.W. and Chase J.G., Dynamic Behaviour of a Slab Sliding System, 14th International Conference on Structural and Geotechnical Engineering, 2015, ICSGE 14, Cairo, Egypt, 20-22 December 2015. http://eng.asu.edu.eg/icsge2015/Program.html
169. Cook, J., Rodgers, GW., MacRae, GW. and Chase, JG. (2015). Experimentation with tension-only devices for use with seismic energy dissipation systems. Sydney, Australia: Proceedings of the Tenth Pacific Conference on Earthquake Engineering: Building an Earthquake-Resilient Pacific (PCEE 2015), 6-8 November. 8-pages.
170. Pourali, A., Dhakal, R.P., MacRae, G.A. and Tasligedik, S. (2015). Fully-Floating Suspended Ceiling System: Experimental Evaluation of Structural Feasibility & Challenges. Sydney, Australia: Tenth Pacific Conference on Earthquake Engineering (10PCEE), 6-8 November 2015. 8pp.
171. Cook J., Rodgers G. W., MacRae G. A., Chase J. G. “Assessment of the Structural Response and Cumulative Displacement Demand of Grip ‘N' Grab Tension-Only Bracing System”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper O-13.
172. Ramhormozian S., Clifton G. C., Cvitanich D., Maetzig S., MacRae G., “Recent Developments on the Sliding Hinge Joint”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper O-16.
173. Abdolahirad A. A., MacRae G., Bull D., “Dynamically Straightening of Low-Damage Steel Buildings after Earthquake”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper O-41.
174. Westeneng B., Lee C-L., MacRae G., “Prevention of Gusset Plate Out-Of-Plane Sway Buckling Failure in Buckling Restrained Braced Frames”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper O-60.
175. Chanchi Golondrino J., MacRae G., Chase G., Rodgers G., Clifton C., “Effects of the Bolt Grip Length on the Behaviour of Asymmetrical Friction Connections (AFC)”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper and Poster P-08.
176. Malek A., Scott A., Pampanin S., MacRae G., “Damage Assessment Of RC Beam Using Distributed Fibre Optics Strain Sensors”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper and Poster P-13.
177. Ramhormozian S., Clifton G. C., Maetzig S., Cvitanich D., MacRae G., “Influence of the Asymmetric Friction Connection (AFC) Ply Configuration, Surface Condition, And Material On The AFC Sliding Behaviour”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper and Poster P-44.
178. Ebrahimi Koopaee M., Dhakal R., MacRae G. A., “Seismic Collapse Probability Prediction of an RC Frame Building Using Various Ground Motion Selection Methods”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Paper and Poster P-60.
179. Westeneng B., Lee C-L., MacRae G. A., Jones A. Out-of-Plane Buckling Behaviour and Design of BRB Gusset Plate Connections, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017, Paper N° 1419.
180. Sitler B., MacRae G., Takeuchi T., Matsui R., Westeneng B., Jones A. BRB Performance Issues, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017, Paper N° 1380.
181. Takeuchi T., Matsui R., Sitler B., MacRae G., State-of-Art Stability Assessment of Buckling-restrained Braces including Connections, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 602.
182. MacRae G. A. and Clifton G. C., New Zealand Research Applications of, and Developments in, Low Damage Technology for Steel Structures, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 1646.
183. Cook J., Rodgers G. W., MacRae G. A., and Chase J. G., Testing and Modelling of Prototype Tension-Only Seismic Energy Dissipation Devices, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 1373.
184. Abdolahirad A., MacRae G., Yeow T., Bull D., Dynamically Straightening Of Low-Damage Steel Buildings After Earthquake, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 529.
185. Alizadeh S., MacRae G.A., Bull D., Clifton G.C., In-Plane Diaphragm Issues for Steel Buildings in Seismic Zones, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 1457.
186. Jones A., Lee C-L, MacRae G.A., Design and Behaviour of Buckling Restrained Braces, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 1257.
187. Tagawa H., Nagae T., MacRae G. A., Lowes L. Collapse Simulation of U.S. and Japanese Type Steel Moment-resisting Frame Structures using Practical Macro Models with Beam and Shell Elements, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 3496
188. Malek A., Scott A., Pampanin S., MacRae G. A., Damage Evaluation And Residual Capacity of Concrete in Damaged RC Columns, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 604.
189. Ladani F. T., Gregory MacRae, Chase G., Clifton G. C., Flexural Properties Of Bolted Wide Flange Column Splices, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 1416.
190. Pourali A., Dhakal R., MacRae G. A., Tasligedik S., Fully-Floating Suspended Ceiling System: Experimental Evaluation of the Effect Of Mass And Elastic Isolation, 16th World Conference on Earthquake Engineering, 16WCEE 2017, Santiago Chile, January 9th to 13th 2017. Paper 32.
191. MacRae G. A. and Clifton G. C. Recent NZ Applications of, and Developments in, Low Damage Technology for Steel Structures, NZSEE Conference, Wellington, 27-29 April 2017, Paper O1A.1.
192. Ramhormozian S., Clifton G. C., van Bergen B., White M., MacRae G. A., An Experimental Study on the Asymmetric Friction Connection (AFC) Optimum Installed Bolt Tension, NZSEE Conference, Wellington, 27-29 April 2017, Paper O1A.4.
193. Djojo G., Clifton G. C., Henry R., MacRae G. A., Experimental Validation of Rocking CBFs with Double Acting Ring Springs, NZSEE Conference, Wellington, 27-29 April 2017, Paper O1A.7.
194. Rad A. A., MacRae G. A., Hazaveh N. K., Ma Q., Shake Table Testing of Low Damage Steel Building with Asymmetric Friction Connections, NZSEE Conference, Wellington, 27-29 April 2017, Paper O1A.8.
195. Saif K., Lee C. L., MacRae G. A., Yeow T., Effect of Eccentric Moments on Seismic Ratcheting of Single-Degree-of-Freedom Structures, NZSEE Conference, Wellington, 27-29 April 2017, Paper O4C.2.
196. Ramhormozian S., Clifton G. C., Takayama Y., Lam J., MacRae G. A. Self-Centring Capability of the Seismic Friction Dampers: A Conceptual Study on the Static and Dynamic Self-Centring Requirements for the Single Degree of Freedom (SDOF) Asymmetric and Symmetric Friction Connections (AFC and SFC), NZSEE Conference, Wellington, 27-29 April 2017, Paper P1.15.
197. Kordani R., Rodgers G. W., MacRae G. A., Sensitivity Analysis on Post-Tensioning Loss in Structural Rocking Walls, NZSEE Conference, Wellington, 27-29 April 2017, Paper P1.31.
198. Weir C., Clarke H., MacRae G. A. and Scarry J. and Alizadeh S., Web Side Plate Connections Under Axial Load, NZSEE Conference, Wellington, 27-29 April 2017, Paper P1.36.
199. Yeow T.Z., Orumiyehei A., Sullivan T.J. & MacRae G.A., Clifton G.C. & Elwood K.J., “Are friction connections a cost-effective low-damage solution for steel frames?”, NZSEE 2018 Conference, 13-15 April, Auckland. P1.19.
200. Arifin F.A., Sullivan T.J., MacRae G.A. & Mulligan J., Kurata M. & Takeda T., Evaluating the Benefits of Retrofitting Vulnerable Non-Structural Components: A Case Study, NZSEE 2018 Conference, 13-15 April, Auckland. P2.26.
201. Rad A. and MacRae G. A., “Seismic Response of Steel Structures with Unbalanced Stiffness/Strength”, NZSEE 2018 Conference, 13-15 April, Auckland. O1A.2.
202. Ramhormozian S., Clifton G. C, English S., Fredheim S., Beskhyroun S., and MacRae G. A., “Dynamic Performance Analysis and System Identification (SI) of a Low Damage Multi-Storey Structural Steel Building under two Moderately Severe Earthquake Events using Structural Health Monitoring (SHM) Data, NZSEE 2018 Conference, 13-15 April, Auckland. O-1A.1.
203. Sullivan T. J., Fransiscus A. Arifin F. A., MacRae G. A., Kurata M., Takeda T. “Cost-Effective Consideration Of Non-Structural Elements: Lessons From The Canterbury Earthquakes”, 16th European Conference on Earthquake Engineering, Thessalonica, Greece, 18-21 June 2018, Paper 10928.
204. Pourali A, Dhakal R, Tasligedik A, MacRae GA Experimental Evaluation of the Seismic Compatibility between Low-Damage Drywall Partitions and Suspended Ceilings, 11th US National Conference on Earthquake Engineering (11NCEE), Los Angeles, USA, 25 Jun 2018 - 29 Jun 2018. 4 pages. 01 Jun 2018.
205. Bruneau. M., MacRae, G.A., Understanding Structural Selection Decisions in Christchurch’s Reconstruction. Proceedings of the 11th National Conference in Earthquake Engineering, Earthquake Engineering Research Institute, Los Angeles, CA. 25-29 June 2018.
206. Bruneau, M. and MacRae, G., (2018). “Christchurch: Rebuilding a Resilient City?”, IWR2018 – 2nd International Workshop on Resilience, Nanjing and Shanghai, China: October 31 – November 2 2018, Paper No. 113. (Invited keynote).
207. Bruneau M. and MacRae G. A. “Lessons on Attaining Resilience Based On The Christchurch Rebuild Structural Form Drivers Study”, 17th U.S.-Japan-New Zealand Workshop on the Improvement of Structural Engineering and Resilience, Rydges Lakeland Resort, Queenstown, New Zealand, November 12-14, 2018, organised by the Applied Technology Council, Redwood City, California and the NZ Tertiary Education Commission funded QuakeCoRE.
208. Jury R., Bull D. and MacRae G. A. “NZ Loadings Standard (NZS1170.5) 2016 and 2018 Modifications to Structural Clauses for Increased Seismic Resilience”, 17th U.S.-Japan-New Zealand Workshop on the Improvement of Structural Engineering and Resilience, Rydges Lakeland Resort, Queenstown, New Zealand, November 12-14, 2018, organised by the Applied Technology Council, Redwood City, California and the NZ Tertiary Education Commission funded QuakeCoRE.
209. Bruneau, M. and MacRae, G., (2019). “Reconstructing a very Different Christchurch: How the 2011 Earthquakes have Driven Decisions on Selection of Structural Systems”, CompDyn 2019, 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, M. Papadrakakis, M. Fragiadakis (eds.), Crete, Greece, 24–26 June 2019. (Invited keynote)
210. Cook J., Rodgers G.W. & MacRae G.A. “Assessment of cumulative inelastic displacement demand in energy dissipation systems using the Grip ‘n’ Grab tension-only mechanism”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 4B11.
211. Cui J., Lee C-L & MacRae G. A., “Strong-axis and weak-axis buckling of Buckling Restrained Braces under bidirectional loading”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 9B13.
212. Hatami M., MacRae G. A., Rodgers G. and Clifton G.C., “Numerical and experimental study on friction connections performance - asymmetric and symmetric (AFC/SFC)”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 4B05.
213. Hazaveh N.K., Rad A.A., Chase G.J., Rodgers G.W., Pampanin S., MacRae G.A., Ma Q., “Structural strengthening with displacement and direction dependent (D3) viscous dampers using aftershocks – shaking table study ”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 9B12.
214. Livia E., Yoo J. and MacRae G. A., “Development of a tension-only friction dissipater for rocking wall”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. P09.
215. MacRae G. A., Rangwani K., Dhakal R. & Soleimankhani H., Clifton G. C., Bagheri H. & Yan Z. Ramhormozian S., Zhao X., Jia L-J. & Xiang P., “The ROBUST Building System”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. P20.
216. Ni Y., Zhang Z.Y., MacRae G.A. Carr A. J., Yeow T.Z., “Development of practical method for incorporation of elemental damping in inelastic dynamic time history analysis”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 4C11.
217. Ramhormozian S., Clifton G C., Good T., Jiang S., G.A. MacRae, “Dynamic time history analysis of a low damage multi-storey building incorporating the seismic friction dampers using a proposed simplified multi degree of freedom (MDOF) model: Is self-centring really a concern”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 9B07.
218. Tork-Ladani F., Chase J.G. & G.A. MacRae, “Bending stiffness and strength performance of different column splice connections”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 8A01.
219. Vazquez-Colunga S.Y., Lee C.-L. & MacRae G.A., “Axial strength of gusset plates in buckling restrained braced frames under bidirectional monotonic loads”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 9B14.
220. Yan Z., Bagheri H., Clifton C., Quenneville P., Ramhormozian S., MacRae G., Dhakal R., Zhao X., Jia L. & Xiang P., “Shaking table test of a near full scale low damage structural steel building: structural aspect”, Pacific Conference on Earthquake Engineering, Auckland, 4-6 April 2019. 9B09.
221. Hatami M, MacRae G.A., Rodgers G. and Clifton G. C., “Steel Shim Hardness Effects on Asymmetric Friction Connection Performance”, 12th Canadian Conference on Earthquake Engineering, Quebec, 17-20 June 2019, Paper 192-Fvq8-208
222. MacRae G. A., “Recovery after the Canterbury Earthquakes”, 12th Canadian Conference on Earthquake Engineering, Quebec, 17-20 June 2019, Paper 192-kH8h-43.
223. Arifin, F., Sullivan T., Kurata M., Takeda T., and MacRae, G., (2019). “Effects of Cladding on the Seismic Performance of a Steel Building Possessing Steel Eccentrically Braced Frames”, 7th International Conference of Euro Asia Civil Engineering Forum (EACEF 2019), Stuttgart, Germany, 30 September 2019 – 2 October2019. ID 238.
224. Ramhormozian S., Clifton G. C., Yao C., Poirot M., Ashikov A., MacRae G. A.., “Finite Element Analysis (FEA) of the Asymmetric Friction Connection (AFC) with and without Belleville Springs (BeSs) in the Sliding Hinge Joint (SHJ) Connection”, 12th Pacific Structural Steel Conference (PSSC2019), Tokyo Institute of Technology, Japan. November 9 – 11, 2019. Submission ID: C000242).
225. Bagheri, H., Hashemi A., Zarnani, P., Quenneville P., Yan, Z., Clifton, G. C., MacRae, G. A., Full-scale shaking table testing of a low-damage steel structure using Resilient Slip Friction Joint, NZSEE Conference Proceedings, 22 – 24 April 2020, Wellington, Paper 0097, Published Online. ISBN: 978-0-473-52983-3.
226. Mohandas, K.T., Ramhormozian, S., Clifton, G. C., MacRae G. A., The seismic performance of structural steel buildings in the 2010/2011 Christchurch Earthquake series and the 2016 Kaikoura earthquake: lessons learned, ongoing research and needs of industry, NZSEE Conference Proceedings, 22 – 24 April 2020, Wellington, Paper 0145, Published Online. ISBN: 978-0-473-52983-3.
227. Chanchi Golondrino, J. C., MacRae, G. A., Chase, J. G., Rodgers, G., Clifton, G. C., Towards a better understanding of the development of the strength in Asymmetrical Friction Connections (AFCs), NZSEE Conference Proceedings, 2020, Paper 0009, Published Online. ISBN: 978-0-473-52983-3.
228. Rangwani K.P., Rodgers G., Soleimankhani H., Cook J., MacRae G., Tension-only device for a steel rocking frame system, NZSEE Conference Proceedings, 2020, Paper 0081, in virtual USB. ISBN: 978-0-473-52983-3.
229. MacRae G.A., Lee C-L., Vazquez-Colunga S.Y., Cui J., Alizadeh S., Jia L-J., BRB system stability design, NZSEE Conference Proceedings, 2020, Paper 0054, in virtual USB. ISBN: 978-0-473-52983-3.
230. MacRae G.A., Zhao X., Jia L-J., Xiang P., Clifton G.C., Dhakal R., Rodgers G. and
Ramhormozian S., Robust friction building shaking table testing overview, NZSEE Conference Proceedings, 2020, Paper 0049, in virtual USB. ISBN: 978-0-473-52983-3.
231. Yan Z., Bagheri H, Clifton GC, Quenneville P, Ramhormozian S, MacRae GA, Dhakal R, Zhao X, Jia LJ & Xiang P, Shake Table Testing of a Near Full Scale Three-Storey Friction Based Low Damage Steel Structure: Structural Design and Detailing, NZSEE Conference Proceedings, 2020, Paper 0042, in virtual USB. ISBN: 978-0-473-52983-3.
232. Yan Z., Bagheri H, Clifton GC, Quenneville P, Ramhormozian S, MacRae GA, Dhakal R, Zhao X, Jia LJ & Xiang P, Shake Table Testing of a Near Full Scale Three-Storey Friction Based Low Damage Steel Structure: Structural Design and Detailing, NZSEE Conference Proceedings, 2020, Paper 0042, in virtual USB. ISBN: 978-0-473-52983-3.
233. MacRae G. A., Ahmadzadah S., Ashdown J., Soleimankhani H., McGann C. “Moment frame column seismic demands”, NZSEE Conference Proceedings, Christchurch 2021, on USB. O4C.4.
234. Soleimankhani H., MacRae G. A., Sullivan T., Simple Design Methods to Make Allowance for Building Inelastic Torsion, NZSEE Conference Proceedings, Christchurch 2021, on USB. O5B.2
235. Alizadeh S., MacRae G.A., Bull D., Clifton G.C. Advances in floor diaphragm in-plane modelling using truss elements, NZSEE Conference Proceedings, Christchurch 2021, on USB. O5B.2.
236. Yan Z., Bagheri H., Ramhormozian S., Clifton C., Rangwani K., MacRae G., Quenneville P., Rodgers G., Xiang P., Jia L-J., Zhao X. “Three-storey Configurable Steel Framed Building Incorporating Friction Based Energy Dissipaters: Structural Configuration and Instrumentation”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P01.
237. Shayan S., MacRae G. A., Moghadam A. S., “Difference between pinned and fixed column bases on single-storey frame column seismic performance”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P18.
238. Rangwani K., MacRae G.A., Rodgers G., Soleimankhani H. “Rocking Frame Behaviour with Tension Only Device – Numerical Study”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P21.
239. Lin Y., Hogan G., MacRae G. A., Soleimankhani H. & McGann C., “Building Drift Measures”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P25.
240. Bashiri M., Jia L-J., MacRae G. A., Moghadam A. S. “Steel Element Ductile Fracture Considerations for Remaining Earthquake Life Assessment”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P26.
Non-Journal Abstract Refereed Publications
1. MacRae G. A. and Carr A. J., "Capacity Design of Steel Moment-Resisting Frames", Proceedings, Pacific Conference on Earthquake Engineering, Wairakei, New Zealand, Vol. 2, pp. 47-58, 1987.
2. MacRae G. A., Carr A. J. and Walpole W. R., "Inelastic I-Shaped Beam-Columns in Earthquake-Resistant Structures", Proceedings, Pacific Structural Steel Conference, Gold Coast, Australia, May 1989.
3. MacRae G. A., Walpole W. R. and Carr A. J., "Cyclic Bending of Steel Beam-Columns in Earthquake-Resistant Structures", Proceedings, Pacific Structural Steel Conference, Gold Coast, Australia, May 1989.
4. MacRae G. A. and Kawashima K., "Ductility Measurement for the Testing of Steel Bridge Piers", Proceedings, Annual Meeting of the Japan Society of Civil Engineering, Niigata, 30 September to 2 October 1990.
5. MacRae G. A., Kawashima K. and Hasegawa K., "Repair and Retrofit of Steel Piers", Proceedings of the First U.S.-Japan Workshop on Seismic Retrofit of Bridges, Public Works Research Institute, Tsukuba Science City, Japan, 17-18 December 1990, pp. 405-421.
6. MacRae G. A., Kawashima K., Hasegawa K., Ikeuchi T. and Oshima K., "Behavior of Stiffened Box-Section Steel Bridge Piers in Seismic Regions from Model Tests", Proceedings, 7th U.S.-Japan Bridge Workshop, UJNR, US-Japan Panel on Wind and Seismic Effects, Tsukuba, 8-9 May 1991.
7. MacRae G. A. and Kawashima K., "Residual Displacements of Bridges in Earthquakes", Proceedings, Annual Meeting of the Japan Society of Civil Engineering, Osaka, 17-19 September 1991.
8. MacRae G. A. and Kawashima K., "The Earthquake Resistance of Steel Bridge Piers", Proceedings, Nineteenth Japan Road Bridge Conference, Tokyo, 21-25 October 1991 (in Japanese).
9. MacRae G. A., Walpole W. R. and Carr A. J., "Behaviour and Design of Moment-Resisting Steel Frames", Proceedings, Pacific Conference on Earthquake Engineering, Auckland, New Zealand, November 1991.
10. MacRae G. A. and Priestley M. J. N., "P-Delta Design for Seismic Areas", Proceedings, Third NSF Workshop on Bridge Engineering Research in Progress, La Jolla, California, 16-17 November 1992.
11. Priestley M. J. N., Seible F., MacRae G. A., Chai Y. H. and Wong R., "Santa Monica Viaduct Retrofit - Full-Scale Test on Column Lap-Splices with #11 [35mm] Reinforcement", Proceedings, Third NSF Workshop on Bridge Engineering Research in Progress, La Jolla, California, 16-17 November 1992.
12. Priestley M. J. N., Seible F., Chai Y. H. and MacRae G. A., "Santa Monica Viaduct Proof Tests", Proceedings, Second Annual Caltrans Seismic Research Workshop, Sacramento, 16-18 March 1993.
13. MacRae G. A., Priestley M. J. N. and Seible F., "Santa Monica Column Splice and Cap-Beam Proof Tests", Proceedings, Second US-Japan Workshop on Seismic Retrofit of Bridges, Berkeley, January 1994.
14. Priestley M. J. N. and MacRae G. A., "Testing of Two Precast Post-Tensioned Beam/Column Joint Subassemblages with Unbonded Tendons", Proceedings, Fourth Meeting of the U.S.-Japan Joint Technical Coordinating Committee on Precast Seismic Structural Systems (JTCC-PRESSS), Tsukuba, Japan, 16-17 May 1994.
15. Priestley M. J. N. and MacRae G. A., "Precast Seismic Resisting Frames Using Unbonded Prestressing Tendons", Proceedings, Federation Internationale de la Precontrainte, Washington Congress, June 1994.
16. MacRae G. A., Priestley M. J. N. and Seible F., "Santa Monica Column/Cap-Beam Test", Proceedings, Third Annual Caltrans Research Workshop, Sacramento, 27-29 June, 1994.
17. Holombo J., MacRae G. A. and Priestley M. J. N., "Seismic Retrofitting of Steel Bridge Columns", Proceedings, Third Annual Caltrans Research Workshop, Sacramento, 27-29 June, 1994.
18. MacRae G. A., Priestley M. J. N. and Seible F., "Shake Table Tests of Twin Column Bridge Bents", Proceedings, Third Annual Caltrans Research Workshop, Sacramento, 27-29 June, 1994.
19. Kowalsky M. J., Priestley M. J. N. and MacRae G. A., "Displacement Based Design of RC Bridge Columns", Proceedings, Second International Workshop on Design of Bridges, Queenstown, New Zealand, 9-12 August 1994.
20. Priestley M. J. N. and MacRae G. A., "Testing of Two Precast Post-Tensioned Beam/Column Joint Subassemblages with Unbonded Tendons", Proceedings, PCI, 1994 Annual Meeting and Committee Days, October 13-16, 1994, Chicago, Illinois.
21. Roeder C. W. and MacRae G. A., "Research In Progress on Steel Bridges at University of Washington", Proceedings, Fourth National Workshop on Bridge Research in Progress, Buffalo, New York, 17-19 June 1996, p231-236.
22. Stanton J., MacRae G. A. and Nosho K., "Carbon Fiber Seismic Retrofit of Poorly Confined Square Reinforced Concrete Columns Subjected to Large Axial Forces", Proceedings, Fourth National Workshop on Bridge Research in Progress, Buffalo, New York, 17-19 June 1996, p263-268.
23. Savage B. M. and MacRae G. A., “Developing Engineering Coursework with Multidisciplinary Applications and Field Research Results”, Proceedings, Fifth Faculty Enhancement Workshop on “Teaching the Materials Science, Engineering and Field Aspects of Concrete”, University of California, Berkeley, National Science Foundation Center for Science and Technology of Advanced Cement-Based Materials, Paper T165-5, July 12-15, 1998.
24. MacRae G. A., Roeder C. W., Crocker P., Wong S. and Arima K., “Fatigue Investigation of Two Riveted Steel Bridges”, Proceedings, Structural Engineering World Congress, July 1998.
25. MacRae G. A., Fields D. and Mattheis J., “Effects of Vertical Content of Ground Shaking on 2-D and 3-D Inelastically Responding Steel Frames”, Proceedings, ASCE Structures Congress, New Orleans, April 1999.
26. MacRae G. A., Stanton J. F. and Kim J., “Design Issues for FRP Jacketed Concrete Columns”, Proceedings, ASCE Materials Congress, Cincinnati, May 1999.
27. Morrow D. V., MacRae G. A. and Roeder C. W., “Near Fault Ground Motion Effects on SDOF Inelastic Response”, Proceedings, ASCE Lifelines Conference, Seattle, August 1999.
28. Scott K., Roeder C. W. and MacRae G. A., “Seismic Assessment of Concrete Filled Steel Frame Substations”, Proceedings, ASCE Lifelines Conference, Seattle, August 1999.
29. MacRae G. A., Fields D. and Mattheis J., “Ground Motion Characteristic Effects On Multistory Steel Frame Response”, Proceedings, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, February 2000.
30. Sugata M., Stanton J. F. and MacRae G. A., “Seismic Analysis of Post-tensioned Precast Seismic Frame”, Proceedings, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, February 2000.
31. MacRae G. A., Morrow D. and Roeder C., “Short Structure Inelastic Response to Near Fault Shaking”, Proceedings, ASCE Structures Congress, Philadelphia, 2000.
32. MacRae G. A., Fields D., Turkmen I. and Tagawa H., “Effect of Shaking Characteristics on Steel Moment Resisting Frames”, Proceedings, ASCE Structures Congress, Philadelphia, 2000.
33. Roeder C. W., MacRae G. A. and Waters C., “Seismic Behavior of Steel Braced Frame Connections to Composite Columns”, Steel Connections IV Workshop, October 2000.
34. Roeder C. W. and MacRae G. A., “Fatigue Cracking and Expected Remaining Life of Rivetted Steel Bridges”, 16th US-Japan Bridge Engineering Workshop, Lake Tahoe, Nevada, October 2000.
35. Tagawa H. and MacRae G. A., “Evaluation of Bi-Direction Shaking Assessment Methods for 3-D Structures”, The First International Conference on Steel and Composite Structures, 14-16 June 2001, Pusan, Korea, Paper #266.
36. MacRae G. A. and Tagawa H., “Assess SDOF Inelastic Demands from Near Fault Shaking”, ASCE Structures Congress, 21-23 May 2001, Washington D.C..
37. Kimura Y., MacRae G. A. and Roeder C. W., “Steel Braced Frame Composite Column Connection Behavior”, ASCE Structures Congress, 21-23 May 2001, Washington D.C.
38. Roeder C. W. and MacRae G. A., “Extending the Fatigue Life of Older Bridges with Riveted Coped Stringer Connections”, Proceedings, Fifth National Workshop on Bridge Research in Progress, 2001.
39. Kimura, Y., MacRae G. A.,, Roeder C. W., “The Effect of Structural Properties on the Soft Story Mechanism of Two Story Braced Frames”, Proceedings, Architectural Institute of Japan, 2002, 2pp (in Japanese).
40. MacRae G. A. and Tagawa H. “Near-Fault Shaking Demands on Short Structures”, ASCE Structures Congress, Seattle, WA, 2003.
41. Stanton, J., MacRae G. A., and Lehman D., “Building Damage during the 2001 Nisqually Earthquake”, ASCE Structures Congress, Seattle, WA, 2003.
42. MacRae G., Kimura Y. and Roeder C. (2003). "System Considerations for Concentrically Braced Steel Frames with CFT Columns", International Workshop on Steel and Concrete Composite Construction, IWSCCC, National Center for Research on Earthquake Engineering (NCREE), Taiwan, October.
43. Roeder C., MacRae G., Gunderson C. and Lehman D. (2003). "Seismic Design Criteria for CFT Braced Frame Connections", International Workshop on Steel and Concrete Composite Construction, IWSCCC, National Center for Research on Earthquake Engineering (NCREE), Taiwan, October.
44. Kimura, Y. and MacRae, G., (2003). “Effect of the Column Flexural Stiffness and Strength to Limit Story Drift Concentration Braced Multi Story Frames”, 9th East Asia Pacific Conference on Structural Engineering and Construction, December, pp.40-45.
45. Hoedajanto D. and MacRae G., “Use of Pushover Analysis in Performance Based Design of Multistory Buildings”, EASEC-9, Bali, Indonesia, 2003.
46. Kimura, Y. and MacRae, G., (2004). “Effect of Column Flexural Stiffness and Strength on Story Drift Concentration for Two Story Braced Frames”, 1st International Conference on Urban Earthquake Engineering, Vol. 1, March, pp.70-71.
47. Tagawa H., MacRae G., Lowes L., “"Evaluation and Mitigation of P-Delta effects on 2D frame behavior", 2004 Annual Stability Conference, March 24-27, Long Beach, CA, USA, SSRC, 2004.
48. Preuss, J. and MacRae G. A. “SEATTLE FAULT SCENARIO - Influencing the Future By Applying Lessons from the Past”, KU-UW International Symposium #1 on Design Strategy towards Safety & Symbiosis of Urban Space, Seattle, USA, June 14-15, 2004.
49. Kimura, Y. and MacRae, G., (2006). “Application of Elastic Continuous Column to Limit Story Drift Concentration of Braced Two Story Frames”, 10th East Asia Pacific Conference on Structural Engineering and Construction, August, pp.771-776.
50. MacRae, G A (2008). “A New Look at Some Earthquake Engineering Concepts”, Nigel Priestley Symposium, Lake Tahoe, August 4-5 2008, IUSS Press, Pavia, Italy.
51. Butterworth J., Clifton G. C. and MacRae G. A. “Developments in Steel Frame Joints in New Zealand”, The Structural Engineer, Institute of Civil Engineers, p 20-21, 19 August 2008.
52. Umarani C., MacRae G. A., Fenwick R. and Carr A. J. “Slab Effects On Seismic Performance of Moment Frame Buildings”, Fumio Watanabe Symposium, Kyoto, October 2008.
53. Tagawa, H., MacRae, G.. and Lowes, L., “Probabilistic Evaluation of Seismic Performance of 3D Japanese-Type and U.S.-Type Steel Moment Frame Structures”, Fumio Watanabe Symposium, Kyoto, October 2008.
54. Sugioka K., MacRae G., Saleh M. and Beamish M., “Experimental Investigation of Stress Reduction for Orthotropic Steel Bridge Decks”, 7th Austroads Bridge Conference, Auckland, 2009. Poster Presentation.
55. MacRae, G. A., “Seattle Fault Scenario - A Decision-Making Tool for Seismic Risk”, 2nd International Workshop on Seismotectonics in Myanmar and Earthquake Risk Management, SMERM 2009, Yangon, Myanmar, 29-30 April 2009. Presentations were stored on CD and distributed by the Myanmar Engineering Society. Invited Presentation.
56. MacRae, G. A., The Development of the Continuous Column Concept, 7th International Conference on Urban Earthquake Engineering & 5th International Conference on Earthquake Engineering Joint Conference March 3-5, 2010, Tokyo, April 2010. Invited Presentation.
57. Chanchi J., MacRae G. A., Chase J. G., Clifton C., Rodgers G. W., Velocity dependence of high-force-to-volume (HF2V) lead dampers using different shaft configurations. New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 99.
58. Chanchi J., MacRae G. A, Chase J. G., Clifton G. C, Rodgers G. W. “Behaviour of asymmetrical friction connections using different shim materials”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Paper 100.
59. MacRae G. A and Clifton G. C, “Low Damage Steel Construction”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 1.
60. Clifton G. C. and MacRae G. A., “Lessons from the Christchurch Sequence”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 8.
61. Chanchí Golondrino J., MacRae G.A., Chase J. G., Clifton G. C. and Rodgers G. W., Recent Research on Two Low Damage Dampers Applicable to Steel Framing Systems, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 12.
62. Hobbs M., MacRae G. A., Bull D., Gunasekaran U., Clifton G. C., and Leon R., “Slab Column Interaction - Significant or Not?”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 14.
63. Gardiner S., Clifton G. C. and MacRae G.A. “Performance, Damage Assessment and Repair of a Multistorey Eccentrically Braced Framed Building following the Christchurch Earthquake Series”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 19.
64. Causse R., Rodgers G. W., Chase J. G., Chanchi J., MacRae G. A. and Clifton G.C. “Characterisation of Velocity Effects. Corrosion Coating and Shim Material on Initial Performance and Degradation of Sliding Friction Connections”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 20.
65. Borzouie J., Rodgers G. W., MacRae G. A., Chase J. G., Clifton G. C. and Moghadam A. S., “Base Connections Seismic Sustainability and Base Flexibility Effects”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 22.
66. Cowie K., Hicks S., MacRae G.A., Clifton G. C. and Fussell A. “Seismic Design of Composite Metal Deck and Concrete-filled Diaphragms - A Discussion Paper”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 24.
67. Thomson D., Woodhead S., Dhakal R., Lin S.L, Yeow T. and G. A. MacRae, “Application of Seismic Loss Assessments – Reinforced Concrete or Steel?”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 25.
68. Chunhaviriyakul P., MacRae G. A., Anderson D., Clifton G. C., Leon R. T. “Composite Steel- Concrete Construction for New Zealand”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 41.
69. Khanlou A., MacRae G. A., Scott A., Hicks S., Clifton G. C., “Performance of Composite Slabs with Different Reinforcement under Hogging Moment”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013, Paper 45.
70. MacRae G. A., Clifton G. C., “Rocking Structure Design Considerations”, Steel Innovations Conference, Steel Construction New Zealand, Wigram, Christchurch, 21-22 February 2013.
71. Koopaee Ebrahimi, M., Dhakal R., and MacRae G. A., “An Enhanced Estimation of Collapse Fragility of RC Buildings”, ASEM13 Congress, September 8-12, 2013, Jeju, Korea. Paper ID : ES360_414
72. MacRae G. A., Clifton G. C., “NZ University Research on Steel Structures in Seismic Areas”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015. (Keynote)
73. MacRae G. A., Clifton G. C., “Research On Seismic Performance Of Steel Structures”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
74. Westeneng B. A., Lee C.-L., and MacRae G. A., “Early Failure Of Gusset Plates In Buckling Restrained Brace Frames”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
75. Luo F., Gholamhoseini A. and MacRae G. A., “Analytical Study Of Seismic Behaviour Of Composite Slabs”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
76. Xie R., Chanchi Golondrino J., MacRae G. A., Chase G., Rodgers G., and Clifton C., Hysteretic Behaviour Of A Frame Using A Brace Equipped With An Asymmetrical Friction Connection (AFC), Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
77. Cook J., Rodgers G.W., MacRae G.A. & Chase J.G.” Development of a ratcheting, tension-only fuse mechanism for seismic energy dissipation”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015. (Same as 2015 NZSEE paper)
78. Tork Ladani F., MacRae G.A. and Chase J.G. “Effects Of Column Splice Location On Seismic Demands In Steel Moment Frames Considering Splice Flexibility”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
79. Tjahjanto H., MacRae G., Abu A., Clifton C., Beetham T. and Mago N.”Behavior of External Diaphragm Connections for Square CFST Columns Under Bidirectional Loadings”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
80. Chaudhari T. D., MacRae G. A., Bull D., Chase G., Hicks S., Clifton G. C., Hobbs M.,”Composite Slab Effects On Beam - Column Subassembly Seismic Performance”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
81. Gharahshir N., Gholamhoseini A., MacRae G. C., and Clifton G. C., “Stiffness Of Composite CFST Columns”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
82. Gholamhoseini A., Khanloo A., MacRae G. A., Scott A., Hicks S. and Leon R.” Ultimate Strength Of Reinforced And Steel Fibre Reinforced Concrete (SFRC) Continuous Composite Slabs (An Experimental Study)”, Steel Innovations Conference, Steel Construction New Zealand, Aotea Centre, Auckland, 3-4 September 2015.
83. Tagawa H., MacRae G. A. and Nagae T., 2016. Seismic Simulation Of Japanese and U.S. Type Steel Moment-Resisting Frame Structures: Macro Modeling With Beam And Shell Elements, 4th International Conference on Archi-Cultural Interactions through the Silk Road (iaSU2016), 16-18 July, Mukogawa Women's University, Nishinomiya, Japan.
84. MacRae G. A., Clifton G. C. and Bruneau M., Some NZ Earthquake Lessons and Better Building Construction (Paper 390), 25-27 November 2016, Australian Earthquake Engineering Society Conference, Melbourne, Australia. Invited Keynote Lecture.
85. Collow A., Chand A., Lu Y–C., Lee C-L. and MacRae G. Axial-moment interaction and load path dependency for steel columns, SESOC Conference, 2 & 3 November 2017, TSB Bank Auditorium Shed 6, Wellington.
86. Bruneau, M., MacRae, G., (2018). “Post-Earthquake Christchurch: A City Rebuilding in Steel”, 87th Annual Convention, Structural Engineers Association of California, Palm Springs, California, September, 2018.
87. MacRae G. A., Lee C.-L., Vazquez-Colunga S.Y., Cui J., Alizadeh S., Jia L-J., BRB System Design for Stability, 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2g-0002 (C000087).
88. MacRae G. A., Zhao X., Jia LJ, Clifton G. C., Dhakal R., Xiang P., Ramhormozian S., Rodgers G., The China-NZ ROBUST Friction Building Shaking Table Testing Overview, 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2g-0044 (C000558).
89. Soleimankhani H., MacRae G. A., Sullivan T. J. (2020). "Effects of Hysteretic Behavior on Inelastic Response of Single Story Systems with Torsional Response", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2b-0055 (C000874).
90. Clifton G. C., Rezaeian H., MacRae G.A. (2020). "Demand, Analysis and Capacity of Composite Slab Seismic Diaphragms", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2c-0262 (C003680).
91. Vazquez-Colunga S.Y., Lee C.L., MacRae G.A. (2020). "Brace End Flexibility Effects on the Stability of Buckling Restrained Braced Frame", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2g-0009 (C000178).
92. Rad A. and MacRae G. A. (2020). "Seismic Ratcheting of Steel Structures with Unbalanced Stiffness/Strengths - Shaking Table Study", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2g-0063 (C000730).
93. Djojo G. S., Clifton G. C., Henry R.S., MacRae G.A. (2020). "Behaviour of the Centralised Rocking Concentrically Braced Frame Under Static and Dynamic Loading", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2i-0003 (C000053).
94. Dong W-C., Li M-H., Lee C-L., MacRae G. A., Abu A.(2020). "Cyclic tests of glulam frames with buckling restrained braces (BRBs)", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2i-0030 (C000356).
95. Jia L.J., Xie R., Fan K., Xiang P., Zhao X., MacRae G.A., Clifton G.C., Dhakal R., Ramhormozian S., Yan Z., "ILEE ROBUST PROJECT: Development of a Multiple Rocking Steel Structural System", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2i-0082 (C001347).
96. Yan Z., Ramhormozian S., Clifton G. C., Bagheri H., MacRae G. A., Quenneville P., Dhakal R., Xiang P., Jia L-J., Zhao X. (2020). "Shaking Table Testing of a Three Storey Steel Frame Building Incorporating Friction-Based Connections: Structural Design and Detailing", 17th World Conference on Earthquake Engineering, Sendai, Japan, September 2020. Paper 2i-0086 (C001401).
97. Bagheri H., Hashemi A., Zarnani P., Quenneville P., Yan Z., Clifton G.C., MacRae G.A., Dhakal R., Zhao X., Jia L. J., Xiang P., "A Low-Damage Steel Structure using Resilient Slip Friction Joint for a Full-Scale Shaking Table Test”, 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2i-0164, (C002932).
98. Dhakal R. P., Rashid M., Bhatta J., Chen C., Song G. Q., Sullivan T. J., MacRae G. A., Clifton G. C., Xiang P., Jia L. J. (2020). "Shake Table Tests on Multiple Non-Structural Elements in a Low-Damage Structural Steel Building", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 2k-0020 (C001122).
99. Clifton G.C., Ferguson W.G., Hodgson M.A., MacRae G.A. (2020). "Assessment and Repair of Damaged Eccentrically Braced Framed Buildings Following a Severe Earthquake", 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 3b-0058 (C002121).
100. Chen C., Xiang P., Jia L., Zhao X., Dhakal R., MacRae G.A., Bhatta J. and Clifton C. (2020). "Seismic Behaviour of Unitised Glazed Curtain Walls in a Low-Damage Structural Steel Building”, 17th World Conference on Earthquake Engineering, Sendai, Japan, September, 2020. Paper 3e-0009 (C001338).
Non-Journal Published Abstracts
1. Kimura Y. and MacRae G. A., “Continuous Column Effects on Frame Seismic Behavior”, Proceedings of the New Zealand Society of Earthquake Engineering Annual Conference, Abstract for Paper 29, Napier, 2006.
Ballantyne D. and MacRae G. A., “Seattle Fault Scenario – Lifeline and Transportation System Impacts”, Proceedings of the 8th National Conference on Earthquake Engineering, 2110, San Francisco, EERI, Oakland, 2006.
MacRae G. A., “Christchurch Post-Earthquake Recovery”, Seismology and Earthquake Engineering (SEE8) Conference, Shahid Beheshti University - International Conference Center, Coordinated by IIEES, Tehran, Iran 13 November 2019. Invited Keynote Presentation.
Non-Journal Published Abstracts and Posters
1. Hewson M. G., MacRae G. A. & Nokes R., “Tsunami Effects on Structural Design”, New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, 2008. Abstract and Poster.
2. MacRae G. A., Urmson C. R., Walpole W. R., Moss P., Clifton G. C., “Axial Shortening Effects of Steel Columns in Frames”, New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, 2008. Abstract and Poster.
3. Au E., MacRae G. A., Pettinga D., Deam B. and Sadashiva V. (2008) “Simple Design for Yielding Structures Subject to Torsion”, New Zealand Society of Earthquake Engineering Annual Conference, Wairakei, April 2008. Abstract and Poster.
4. Leslie S. MacRae G. and Staiger M., “Overstrength Factors for Seismic Design of Steel Structures”, New Zealand Society of Earthquake Engineering Annual Conference, Christchurch, 2009. Abstract and Poster.
5. Singh J., MacRae G. and Deam B., “Vertical Acceleration Effects on Buildings”, New Zealand Society of Earthquake Engineering Annual Conference, Christchurch, 2009. Abstract and Poster.
6. Spooner M, MacRae G., Deam B., Sadashiva V. and Gardiner D., “Flexible Floor Diaphragm Seismic Response”, New Zealand Society of Earthquake Engineering Annual Conference, Christchurch, 2009. Abstract and Poster.
7. Lu, Y. C. and MacRae G. A., “Residual Stress Effects on the Seismic Performance of Steel Framed Structures”, New Zealand Society of Earthquake Engineering Annual Conference, Wellington, 2010. Abstract and Poster, 50.
8. Chanchi J. C., MacRae G. A. and Clifton G. C., “Quantifying Seismic Sustainability of Steel-Framed Structures”, New Zealand Society of Earthquake Engineering Annual Conference, Wellington, 2010. Abstract and Poster, 52.
9. Sadashiva V. K., MacRae G. A. and Deam B. L., “Irregularity Limits For Structures With Coupled Vertical Stiffness-Strength Variations”, New Zealand Society of Earthquake Engineering Annual Conference, Wellington, 2010. Abstract and Poster, 75.
10. Nigbor B., Gavin H.P., MacRae G.A., Rodgers G.W., Nayerloo M., Chase J.G., Gutschmidt S. & Granger C., “Structural Health Monitoring of the Base-Isolated Christchurch Women’s Hospital Following the Canterbury Earthquakes”, New Zealand Society of Earthquake Engineering Conference, Christchurch, 13-15 April 2012. Poster 14. Poster paper 86.
11. Westeneng B., Crake M., Lee C-L., MacRae G. A., Jones A. (2015). Gusset Plate Effective Length Factor and the Effect of Stiffened Gusset Plate Connection on Buckling Restrained Brace Frames, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. POSTER
12. Chaudhari T., MacRae G., Bull D., Chase G., Hicks S., Clifton C. (2015). Composite Slab Effects on Beam-Column Subassembly Seismic Performance, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. POSTER
13. Lyes D. J., Tiong T.I., MacRae G., Bull D. and Cowie K. (2015). A Discussion on Consistent Composite Floor Diaphragm Design for Seismic Loading, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. POSTER
14. Yeow T.Z., MacRae G.A. & Dhakal R.P. (2015). “Incorporating content sliding into seismic building performance assessments”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. PAPER and POSTER
15. Abdolahirad A., MacRae G. and Bull D., (2015). Seismic Behaviour Of Buildings Under The Christchurch Earthquake Sequence, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015, POSTER
16. Tjahjanto H.H., MacRae G.A., Abu A.K., Clifton G.C., Beetham T. and Mago N., (2015), Behaviour of External Diaphragm Connections for Square CFST Columns under Bidirectional Loading, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. POSTER
17. Chanchi Golondrino J., Xie R., MacRae G. A., Chase G., Rodgers G. and Clifton G. C. “Velocity Effects On Asymmetrical Friction Connections (AFC) Using Different Shim Materials”, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. (Poster)
18. Kordani R, Rodgers G., MacRae G., Geoffrey Chase G., Seismic Performance Of Slender Rocking Wall-Frames, New Zealand Society of Earthquake Engineering Annual Conference Proceedings, Rotorua, April 2015. (Poster).
19. Kordani R., Rodgers., MacRae G., Chase G., “Prediction of Inter-Story Drift Demand in Rocking Wall Structures”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Poster P-37.
20. Uma S. R., MacRae G., Nayyerloo M., Sadashiva V., “SQUADS: An Interactive Decision Support Tool to Facilitate Dialogue between Clients and Engineers Towards Performance-Based Seismic Design”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Poster P-40.
21. Jones A., Lee C-L, MacRae G., “Design And Behaviour Of Buckling Restrained Braces”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Poster P-49.
22. Pourali A., Dhakal R., MacRae G., Tasligedik A. S., “Seismic Design of Suspended Ceilings: Review and Recommendations”, NZSEE Conference, Wigram, Christchurch, New Zealand. 1-4 April 2016. Poster P-55.
23. Yan Z., Bagheri H., Clifton C., Quenneville P., Ramhormozian S., MacRae G., Dhakal R., Zhao X., Jia L-J., and Xiang P., “Shaking Table Test of a Near Full Scale Low Damage Structural Steel Building: Structural Aspects”, QuakeCoRE Annual Meeting, 2 - 5 September 2019, Rutherford Hotel, Nelson.
24. MacRae G. A. X. Zhao, LJ Jia, C. Clifton, R. Dhakal, P. Xiang, S. Ramhormozian, G. Rodgers, Friction Building Shaking Table Testing Overview - The Robust Building Systems (ROBUST) Project, Eighth Advances in Experimental Structural Engineering (8AESE) Conference, University of Canterbury, 3 - 5 Feb 2020. Extended abstract.
25. Yan Z., Bagheri H., Ramhormozian S., Clifton C., Rangwani K., MacRae G., Quenneville P., Rodgers G., Xiang P., Jia L-J., Zhao X. “Three-storey Configurable Steel Framed Building Incorporating Friction Based Energy Dissipaters: Structural Configuration and Instrumentation”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P01.
26. Shayan S., MacRae G. A., Moghadam A. S., “Difference between pinned and fixed column bases on single-storey frame column seismic performance”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P18.
27. Rangwani K., MacRae G.A., Rodgers G., Soleimankhani H. “Rocking Frame Behaviour with Tension Only Device – Numerical Study”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P21.
28. Lin Y., Hogan G., MacRae G. A., Soleimankhani H. & McGann C., “Building Drift Measures”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P25.
29. Bashiri M., Jia L-J., MacRae G. A., Moghadam A. S. “Steel Element Ductile Fracture Considerations for Remaining Earthquake Life Assessment”, NZSEE Conference Proceedings, Christchurch 2021, on USB. P26.
Non-Journal Presentations and Proceedings
1. MacRae G. A. and Clifton G. C., 2010. “Steel Structures Workshop 2010, Research Directions for Steel Structures”, Compilation of Presentations, University of Canterbury, 13-14 April.
2. Chanchí J. C., MacRae G. A., Clifton G. C. and Chase G. “Quantifying Seismic Sustainability Of Steel Framed Structures”, in Proceedings of the Steel Structures Workshop 2010, Research Directions for Steel Structures, compiled by MacRae G. A. and Clifton G. C., University of Canterbury, 13-14 April.
3. MacRae G. A., 2010. “Some Steel Seismic Research Issues”, in Proceedings of the Steel Structures Workshop 2010, Research Directions for Steel Structures, compiled by MacRae G. A. and Clifton G. C., University of Canterbury, 13-14 April.
4. MacRae G. A., 2010. “University of Canterbury Research”, in Proceedings of the Steel Structures Workshop 2010, Research Directions for Steel Structures, compiled by MacRae G. A. and Clifton G. C., University of Canterbury, 13-14 April.
5. Khanlou A., MacRae G. A., Clifton G. C. and Hicks S., 2010. “Composite Slab Systems”, in Proceedings of the Steel Structures Workshop 2010, Research Directions for Steel Structures, compiled by MacRae G. A. and Clifton G. C., University of Canterbury, 13-14 April.
6. Lu A. and MacRae G. A., 2010. “Extended Direct Analysis - A Better Way of Designing Non-Seismic Steel Frames”, in Proceedings of the Steel Structures Workshop 2010, Research Directions for Steel Structures, compiled by MacRae G. A. and Clifton G. C., University of Canterbury, 13-14 April.
7. Gavin H., Nigbor R., Lawson W., MacRae G. A., Chase G., Rodgers G, and Gutschmidt S., “Behavior of the Christchurch Women's Hospital”, NSF Workshop on Lessons Learned from the 2011 Japan and Canterbury Earthquakes, Washington DC. February 2012.
8. Gharahshir N., MacRae G. A., Gholamhoseini A., Clifton C., “Lateral Stiffness of Composite CFST Columns”, SESOC Journal, 34(1), Structural Engineering Society, Auckland, New Zealand, April 2021. Non-refereed Research Paper.
Articles
1. Bruneau, M., MacRae, G., (2018). “Rebuilding a City in Steel”, Modern Steel Construction, 58(10), American Institute of Steel Construction, Chicago, Illinois, October 2018, p32-37. ISSN 0026-8445 print, ISSN 1945-0737 online.
2. Bruneau, M., MacRae, G., (2018). “A Seismic Shift to Steel”, Advantage Steel, Education and Research Edition, Canada Institute of Steel Construction, Toronto, Canada, No. 60, Winter 2018, p8-10.
4. Rodgers, G., Chase G., MacRae G., Next Generation Structural Technologies, An Occasional Newsletter from the National Infrastructure Unit, Issue #8 December 2013, http://www.infrastructure.govt.nz/plan/newsletters/pdfs/niu-news-2013-8.pdf
Books and Editing
1. Kawashima K., MacRae G. A., Hasegawa K., Ikeuchi T. and Oshima K., "Ductility of Steel Bridge Piers from Dynamic Loading Tests", in Stability and Ductility of Steel Structures under Cyclic Loading, Edited by Fukumoto Y. and Lee G., CRC Press Inc., 1992, pp. 149-162.
2. MacRae G. A. and Kawashima K., "Estimation of the Deformation Capacity of Steel Bridge Piers", in Stability and Ductility of Steel Structures under Cyclic Loading, Edited by Fukumoto Y. and Lee G., CRC Press Inc., 1992, pp. 335-347.
3. Roeder C. W. and MacRae G. A., "Steel Structures”, Chapter 10 of “Computer Analysis and Design of Earthquake-Resistant Structures", edited by Beskos D. E. and Anagnostopoulos S. A., Computational Mechanics Publications, ISBN 1853123749, September 1997, pp. 533-561.
4. MacRae G. A. and Lehman D., “Chapter 4, Buildings”, from “The Nisqually, Washington, Earthquake, February 28, 2001 Preliminary Reconnaissance Report”, coauthored by the Nisqually Earthquake Clearinghouse Group, University of Washington, Seattle. Published by the Earthquake Engineering Research Institute as an EERI Learning from Earthquakes Project, March 2001.
5. Earthquake Engineering Research Institute. 2005. Scenario for a Magnitude 6.7 Earthquake on the Seattle Fault, June. (http://seattlescenario.eeri.org/documents/EQScenarioFullBook.pdf). MacRae was on the project team that wrote the full report. In addition he was responsible for the Transportation Chapter, as well as the Commercial building section in the Building Chapter.
6. Mazzolani F., MacRae G. A. and Clifton G C. 2018. Behaviour of Steel Structures in Seismic Areas, 9th STESSA 2018. Selected, peer reviewed papers from the 9th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA 2018), February 14-17, 2018, Christchurch, New Zealand Published Proceedings. Trans Tech Publications, Key Engineering Materials Vol. 763, ISBN: 978-3-0357-1301-5, http://www.scientific.net.
Technical Reports
1. MacRae G. A., Carr A. J. and Walpole W. R., "The Seismic Response of Steel Frames", Research Report 90-6, Department of Civil Engineering, University of Canterbury, New Zealand, March 1990. Commissioned by the NZ Heavy Engineering Research Association.
2. Kawashima K., MacRae G. A. and Hasegawa K., "The Strength and Ductility of Steel Bridge Piers Based on Loading Tests", Journal of Research of the Public Works Research Institute, Vol. 29, Ministry of Construction, Japan, March 1992.
3. MacRae G. A. and Kawashima K., "The Seismic Response of Bilinear Oscillators Using Japanese Earthquake Records", Journal of Research of the Public Works Research Institute, Vol. 30, Ministry of Construction, Japan, 1993.
4. Xiao Y., MacRae G. A., Hamada N., Priestley M. J. N. and Seible F., "Rocking and Capacity Test of Model Bridge Pier", Structural Systems Research Project, Report No. SSRP 92/06, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, August 1992. Commissioned by the California Department of Transportation.
5. Priestley M. J. N., Seible F., MacRae G. A., Chai Y. H. and Wong R., "Santa Monica Viaduct Retrofit Full-Scale Test on Column Lap Splices with #18 [57mm] Reinforcement", Test Report No. TR - 93/02, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, January 1993. Commissioned by the California Department of Transportation.
6. MacRae G. A., Priestley M. J. N. and Tao J., "P- in Seismic Regions", Structural Systems Research Project, Report No. SSRP 93/05, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, May 1993, 115pp.
7. Kowalsky M. J., Priestley M. J. N. and MacRae G. A., "Displacement-Based Design – A Methodology for Single Degree of Freedom Reinforced Concrete Structures", Structural Systems Research Project, Report No. SSRP 94/16, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, April 1994. Commissioned by the California Department of Transportation.
8. Priestley M. J. N., MacRae G. A., Ingham J. and Innamorato D., "I-10 Santa Monica Freeway/La Cienega-Venice Blvd. Undercrossing", Chapter 4 of "The Northridge Earthquake of January 17, 1994 - Damage Analysis of Selected Freeway Bridges" edited by Priestley M. J. N., Seible F. and Uang C. M., Structural Systems Research Project, Report No. SSRP 94/06, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, February 1994, 260pp. Commissioned by the California Department of Transportation.
9. MacRae G. A. and Priestley M. J. N., "Precast Post-Tensioned Ungrouted Concrete Beam-Column Subassemblage Tests", Structural Systems Research Project, Report No. SSRP 94/10, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, March 1994, 124pp. Commissioned by the National Science Foundation.
10. MacRae G. A., Priestley M. J. N. and Seible F., "Santa Monica Viaduct Retrofit - Large-Scale Column-Cap Beam Joint Transverse Test", Test Report No. TR - 94/02, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, August 1994. Commissioned by the California Department of Transportation.
11. MacRae G. A., Hodge C., Priestley M. J. N. and Seible F., "Route 5/405 Separation. Shake Table Tests of As-Built and Retrofitted Configuration", Structural Systems Research Project, Report No. SSRP 94/16, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, November 1994, 246pp. Commissioned by the California Department of Transportation.
12. Priestley M. J. N., Seible F. and MacRae G. A., "The Kobe Earthquake of January 17, 1995, Initial Impressions from a Quick Reconnaissance", Structural Systems Research Project, Report No. SSRP 95/03, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, February 1995, 71pp.
13. Holombo J., MacRae G. A., Priestley M. J. N. and Seible F., "Steel Column Proof Tests of the Bayshore and Central Viaducts", Structural Systems Research Project, Report No. SSRP 95/05, Department of Applied Mechanics and Engineering Sciences, University of California, San Diego, April 1995. Commissioned by the California Department of Transportation.
14. MacRae G. A. and Resnick S., "Recycled Glass Paving Tile Performance", Report No. SGEM 96-4, Department of Civil Engineering, University of Washington, November 1996. Commissioned by Clean Washington.
15. Stanton J., MacRae G. A. and Nosho K., "Retrofit of Reinforced Concrete Columns Using Forca Tow Sheet Carbon Fiber Wrapping", Report No. SGEM 96-2, Department of Civil Engineering, University of Washington, 1996. Commissioned by Tonen Corporation.
16. MacRae G. A., “Near-Field Effects”, as part of Roeder C. W. and MacRae G. A., “Seismic Building Evaluation of Infilled Steel Frames and Near Field Effects”, First Pacific Gas and Electricity Workshop on Seismic Reliability of Utility Lifelines, San Francisco, California, 3 November 1997. Commissioned by Pacific Earthquake Engineering Research Centre.
17. Roeder C. W. and MacRae G. A., “Fatigue Cracking of Riveted Steel Tied Arch and Truss Bridges”, WA-RD 447.1, Washington State Department of Transportation, March 1998. Commissioned by Washington State Department of Transportation.
18. Roeder C. W. and MacRae G. A., “Seismic Behavior of Concrete-Filled Steel Frame Substations”, Final Report, PGE-PEER, April 1999. Commissioned by Pacific Earthquake Engineering Research Centre.
19. MacRae G. A., “Parametric Study on the Effect of Ground Motion Demands and Dynamic Characteristics”, SEAOC-ATC-CUREE, Final Report, SAC, July 1999. Commissioned by the SAC Steel Project.
20. MacRae G. A. and Roeder C. W., “Near Fault Ground Motion Effects on PG&E Structures”, Final Report, PGE-PEER, October 1999. Commissioned by the Pacific Earthquake Engineering Research Centre.
21. Stanton J. F., Day S., Sugata M. and MacRae G. A., “Cyclic Load Testing of Precast Hybrid Frame Moment-Resisting Connections”, Final Report, Charles Pankow Builders Limited, April 2000. Commissioned by Charles Pankow Builders Limited.
22. Kim J., MacRae G. A. and Stanton J. F., “Testing of Hybrid Frame Corner Beam-Column Subassembly with Continuous Post-Tensioning Steel”, Final Report, Charles Pankow Builders Limited, April 2000.
23. MacRae G. A. and Tagawa H., “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No: 505, Interim Progress Report, PG&E Meeting, PEER, Richmond, December 2000. Commissioned by Pacific Earthquake Engineering Research Centre.
24. MacRae G. A. and Tagawa H., “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No: 505, Summary Progress Report, PEER Meeting, Oakland, January 2001. Commissioned by Pacific Earthquake Engineering Research Centre.
25. MacRae G. A. and Tagawa H., “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No: 505, Draft Progress Report, PEER, Richmond, September 2001. Commissioned by Pacific Earthquake Engineering Research Centre.
26. MacRae G. A. and Tagawa H., “Methods to Estimate Displacements of PG&E Structures”, PGE/PEER Task No. 505, Final Report, PEER, Richmond, August 2002. Commissioned by Pacific Earthquake Engineering Research Centre.
27. Banks G., Stanton J. and MacRae G. A. “Performance of Reinforced Concrete Spandrel Beams in Harborview Hospital Retrofitted with Fiber Sheets”, Final Report to University of Washington’s Capital Projects Office, April 2004. Commissioned by the University of Washington.
28. Park R., Watanabe F., … MacRae G. A. et al. “Seismic Design of Precast Concrete Building Structures”, International Federation of Structural Concrete, Federation International Beton (FIB) State of the Art Report, Bulletin 27, October 2003, Lausanne, Switzerland. ISBN 1562-3610.
29. Peng B., MacRae G, Walpole W., Moss P. and Dhakal R., “Plastic Hinge Location in Columns of Steel Frames”, Civil Engineering Research Report, 2006-05. ISSN 0110-3326. June 2006.
30. Hyde K., MacRae G, Walpole W. and Moss P., “Axial Shortening of Steel Columns Subject to Constant Axial Compression and Inelastic Cyclic Displacements”, Civil Engineering Research Report, 2006-06. ISSN 0110-3326. October 2006.
31. MacRae G. A. and Deam B. “Building Regularity For Simplified Modelling”, EQC Project No. 06/514, Department of Civil and Natural Resources Engineering, University of Canterbury, Christchurch 8140, New Zealand, June 2009. 118pp. Commissioned by the NZ Earthquake Commission.
32. Batchelar M., Cattanach A., Clifton G. C., Clarke W., Hare J., MacRae G. A., Middleton D., Sharpe R., Wood, P. “The Canterbury Earthquakes: Answers to critical questions about buildings”, An information paper for the Royal Society of New Zealand, the Institution of Professional Engineers New Zealand, the Structural Engineering Society New Zealand, the New Zealand Geotechnical Society and the New Zealand Society for Earthquake Engineering, July 2011. http://www.royalsociety.org.nz/2011/06/29/earthquake-engineering-information-paper/
33. MacRae G. A., Clifton G. C. and Megget L. “Review of NZ Building Codes of Practice”, Report to the Royal Commission for the Canterbury Earthquakes, New Zealand, August 2011. http://canterbury.royalcommission.govt.nz/documents-by-key/20110923.14. File ENG.ACA.0016
34. MacRae G. A., “Damage resistant design of steel structures”, “Chapter 7 of Base Isolation and Damage-Resistant Technologies for Improved Seismic Performance of Buildings, by Andrew H. Buchanan, Des Bull, Rajesh Dhakal, Greg MacRae, Alessandro Palermo, Stefano Pampanin , Report to the Royal Commission for the Canterbury Earthquakes, New Zealand, August 2011. http://canterbury.royalcommission.govt.nz/
35. Buchanan A. H., Bull D., Dhakal R. P., MacRae G. A., Palermo P., Pampanin S., Base Isolation and Damage-Resistant Technologies for Improved Seismic Performance of Buildings, Report to the Royal Commission for the Canterbury Earthquakes, New Zealand, August 2011. http://canterbury.royalcommission.govt.nz/
36. MacRae G.A., Pampanin S., Dhakal R. Palermo A., Baird A. and Tasligedik S., “Review of Design and Installation Practices for Non-Structural Components”, Report prepared for the Engineering Advisory Group of the Department of Building and Housing by New Zealand Consultants, Industry and Related Experts, June 2012. http://www.naturalhazards.org.nz/NHRP/Publications/Research-Publications/Short-Term-Recovery-Programme
37. Bruneau, M., MacRae, G.A., 2017. “Reconstructing Christchurch: A Seismic Shift in Building Structural Systems”, Quake Centre Report, University of Canterbury, Christchurch, New Zealand. http://resources.quakecentre.co.nz/category/structural/
38. Kowalsky M., Sullivan T. and MacRae G., The Development of Direct Displacement-Based Design, in “Michael John Nigel Priestley”, EUCentre Report, Produced and Distributed by EUCentre Foundation, Via Aldofo Ferrata, 1-27100 Pavia, ISBN: 978-88-85701-00-7, 2017.
39. Bruneau, M., MacRae, G.A., 2019. “Reconstructing Christchurch: A Seismic Shift in Building Structural Systems”, Quake Centre Report, University of Canterbury, Christchurch, New Zealand. Chinese Version. https://detail.youzan.com/show/goods?alias=1y43c7j6ks8q9 , http://product.dangdang.com/27888569.html
Other publications
MacRae G. A. “Obituary for Professor Nigel Priestley”, 2015. http://www.iaee.or.jp/pdf/PriestleyObituary.pdf.