Garage Door Openers
Post date: May 18, 2011 2:53:26 PM
This web page recommends replacing the batteries in the remote control unit every 2 years.
http://allstarremotesonline.com/files/Allstar_MVP_Quick_Code110977b.pdf
Battery Replacement
The MVP Quik-Code transmitter is provided with two factory installed 3-volt batteries which should
be replaced after two years of normal use. The transmitter code is retained in permanent memory and
will not be lost during battery replacement. To replace the batteries, remove the back of the case
with a small screwdriver. Carefully slip the batteries out of the holders and replace with fresh
CR2032 3-volt batteries. The “+” on the batteries must point away from the circuit board. Replace
the back of the cover and resume normal use.