This class is intended for people who have never had a formal GD&T course and need to
understand and interpret the call-outs on part prints on a daily basis.
1. Introduction to Tolerancing
Rectangular Coordinate Dimensioning
Tolerances
2. Form Tolerances
Straightness, Flatness, Circularity and Cylindricity
Functional Gaging and Inspection
3. Orientation Tolerances
Datums, Perpendicularity, Angularity, Parallelism
Functional Gaging and Inspection
4. Location Tolerances
Position, Symmetry, and Concentricity
Material Condition Modifiers, Applications,
Inspection, Advantages of Position Tolerances
5. Runout Tolerances
Circular and Total Runout
6. Profile Tolerances
Line and Surface Profile
7. Industry Specific prints/parts
8. Assessment/Certificate
80% or better on the final assessment = Competency Certificate and 15 PDHs
less than 80% = Participation Certificate
Total Training = 15 hours (15 PDHs or 1.5 CEUs)
This course is designed for Designers, Engineers, Quality Inspectors, Purchasing and others who find it necessary to interpret and understand the Geometric Tolerancing symbols on drawings.
What you get:
500 page Workbook to use as reference and reinforce your competency
Final assessment with Certificate (optional for an additional cost)
15 Professional Development Hours (PDHs)
24/7 access to the online site for 3 or 6 months
It is important that the students have a good print reading and manufacturing processes background, as well as understand the meaning and interpretation of tolerances on a part print. These are considered pre-requisite subjects that will not be covered in-depth in the content presented in this class. The focus will be on understanding and interpreting geometric tolerancing symbols as specified on a print.
Contact us to discuss your training needs