[Selected publications]
55. H.-Y. Jeong, S. Lee, S. Lee, D.-S. Chang, J. G. Lee and E.-C. Jeon*: “Nanoindentation Study on Depth-Dependent Hardness and Embrittlement of He Ion-Irradiated Fe-9Cr Alloy”, Met. Mater. Int., 31 (2025), pp. 1557-1568.
54. H. M. Nam, J. Choi, H. Kim, J. G. Lee* and J. Kim*: “Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature”, Mater. Technol., 39 (2024), 2408132.
53. H. M. Nam, H. Lee, H. Kim, J. G. Lee* and J. Kim*: “Precipitation strengthening of Cu-Ni-Si-based alloys: Experimental and computational insights”, J. Mater. Res. Technol., 27 (2023), pp. 5372-5379.
52. E. Song, G.-H. Lee, H. Jeon, B. J. Park*, J.-G. Lee* and J.-Y. Kim*: “Stretch-flangeability correlated with hardness distribution and strain-hardenability of constituent phases in dual- and complex-phase steels”, Mater. Sci. Eng. A, 817 (2021), 141353.
51. S.-Y. Lee, H.-J. Lee, J.-H. Baek, S. S. Park* and J. G. Lee*: “Microstructural and corrosion properties of Ti-to-Zr dissimilar alloy joints brazed with a Zr-Ti-Cu-Ni amorphous filler alloy”, Metals, 11 (2021), 192.
50. J.-H. Baek, S. Noh* and J. G. Lee*: “Effect of Cr and W contents on Charpy impact properties of Fe-Cr-W oxide dispersion strengthened steels”, Mater. Sci. Eng. A, 793 (2020), 139855.
49. J.-W. Song, J.-J. Park*, G.-J. Lee, M.-K. Lee, K.-H. Park, S.-J. Hong and J. G. Lee*: “Effect of impact velocity on interface characteristics of HT-9 steel joints fabricated by magnetic pulse welding”, Met. Mater. Int., 26 (2020), pp. 360-369.
48. B. Kim, J. C. Kim, S. Lee, K.-S. Lee, J. G. Lee* and S. S. Park*: “High-strain-rate superplasticity of fine-grained Mg–6Zn–0.5Zr alloy subjected to low-temperature indirect extrusion”, Scripta Mater., 141 (2017), pp. 138-142.
47. J. G. Lee, M.-K. Lee*: “Microstructure and mechanical behavior of a titanium-to-stainless steel dissimilar joint brazed with Ag-Cu alloy filler and an Ag interlayer”, Mater. Character., 129 (2017), pp. 98-103.
46. J. G. Lee*, G.-J. Lee, J.-J. Park and M.-K. Lee*: “Corrosion behavior in high-temperature pressurized water of Zircaloy-4 joints brazed with Zr-Cu-based amorphous filler alloys”, J. Nucl. Mater., 488 (2017), pp. 204-209.
45. B. Kim, S. S. Park*, J. G. Lee, G. T. Bae, C. G. Lee, C. D. Yim, J. H. Kim and N. J. Kim: “Microstructure and mechanical properties of twin-roll cast Mg–6Zn–1Mn–1Al alloy joined by surface-friction welding”, Mater. Character., 124 (2017), pp. 8-13.
44. E.-K. Park, S.-M. Hong, G.-J. Lee, J.-J. Park, M.-K. Lee*, J. G. Lee* and K.-W. Seol: “Reduced argon bubble formation in oxide dispersion strengthened steels by high-energy mechanical alloying”, Scripta Mater., 113 (2016), pp. 31-34.
43. S.-M. Hong, J.-J. Park*, E.-K. Park, M.-K. Lee, C.-K. Rhee, J. K. Lee, J. G. Lee and K. H. Kim: “Cavitation erosion behavior of SA 106B carbon steel after treatment of the melt with nano-sized TiC particles”, Tribol. Int., 92 (2015), pp. 585-594.
42. S.-M. Hong, E.-K. Park, J.-J. Park*, M.-K. Lee and J. G. Lee*: “Effect of nano-sized TiC particle addition on microstructure and mechanical properties of SA-106B carbon steel”, Mater. Sci. Eng. A, 643 (2015), pp. 37-46.
41. J.-G. Lee*, J.-J. Park, M.-K. Lee*, C.-K. Rhee, T.-K. Kim, A. Spirin, V. Krutikov and S. Paranin: “End-closure joining of ferritic-martensitic and oxide-dispersion strengthened steel cladding tubes by magnetic pulse welding”, Metall. Mater. Trans. A, 46A (2015), pp. 3132-3139.
40. S.-M. Hong, J.-J. Park, E.-K. Park, K.-Y. Kim, J.-G. Lee*, M.-K. Lee, C.-K. Rhee and J. K. Lee: “Fabrication of titanium carbide nano-powders by a very high speed planetary ball milling with a help of process control agents”, Powder Technol., 274 (2015), pp. 393-401.
39. J. G. Lee and M. K. Lee*: “Microstructural and mechanical characteristics of zirconium alloy joints brazed by a Zr-Cu-Al-based glassy alloy”, Mater. Des., 65 (2015), pp. 265-271.
38. K. H. Kim, J. G. Lee, G. J. Lee, J. J. Park and M. K. Lee*: “Compositional effects of Zr-rich multi-component brazing alloys on the corrosion of Zr alloy joints”, Corros. Sci., 88 (2014), pp. 328-336.
37. M. K. Lee, K. H. Kim, J. G. Lee* and C. K. Rhee: “Oxygen impurity and its alloying effect in sputter-coatings of Zr-based metallic glass alloy for a brazing filler metal”, Mater. Chem. Phys., 148 (2014), pp. 159-168.
36. J. G. Lee, C. H. Lim, K. H. Kim, S. S. Park, M. K. Lee* and C. K. Rhee: “Brazing characteristics of a Zr-Ti-Cu-Fe eutectic alloy filler metal for Zircaloy-4”, J. Nucl. Mater, 441 (2013) pp. 431-438.
35. K. H. Kim, C. H. Lim, J. G. Lee*, M. K. Lee and C. K. Rhee: “Growth and microstructure formation of isothermally-solidified Zircaloy-4 joints brazed by a Zr-Ti-Cu-Ni amorphous alloy ribbon”, J. Nucl. Mater, 441 (2013) pp. 59-66.
34. M. K. Lee, J. J. Park, J. G. Lee* and C. K. Rhee: “Phase-dependent corrosion of titanium-to-stainless steel joints brazed by Ag-Cu eutectic alloy filler and Ag interlayer”, J. Nucl. Mater., 439 (2013) pp. 168-173.
33. M. K. Lee and J. G. Lee*: “Mechanical and corrosion properties of Ti-6Al-4V alloy joints brazed with a low-melting-point 62.7Zr-11.0Ti-13.2Cu-9.8Ni-3.8Be amorphous filler metal”, Mater. Character., 81 (2013) pp. 19-27.
32. J. G. Lee, M. K. Lee*, C. K. Rhee, T. K. Kim and J. M. Kim: “Microstructural evolution of as-rolled modified 9Cr-1Mo steel during friction stir welding”, Int. J. Mater. Res., 104 (2013) pp. 823-826.
31. M. K. Lee, K. H. Kim, J. G. Lee* and C. K. Rhee: “Growth of isothermally-solidified titanium joints using a multi-component Zr-Ti-Cu-Ni-Be amorphous alloy as a brazing filler”, Mater. Character., 80 (2013) pp. 98-104 .
30. J. G. Lee*, C. H. Lim, H. S. Kim, S. J. Hong, M. T. Kim, B. C. Kang, D. K. Park, M. K. Lee and C. K. Rhee: “Highly dense steel components prepared by magnetic pulsed compaction of iron-based powders”, Powder Technol., 228 (2012), pp. 254-257.
29. M. K. Lee*, J. G. Lee, K. H. Kim, C. H. Lim, C. K. Rhee and C. H. Park: “Amorphous sputter coating of a multi-component Zr-Ti-Ni-Cu alloy as a filler for brazing Zircaloy-4”, J. Nucl. Mater., 426 (2012), pp. 9-15.
28. J. H. Kim, R. M. Raihanuzzaman, C. K. Rhee, J. G. Lee, M. K. Lee and S-J. Hong: “Fabrication and Densification Behavior Analysis of Metalizing Targets Using ZrO2 Nanopowders by Magnetic Pulsed Compaction”, Mater. Trans., 52 (2011), pp. 1156-1162.
27. M. K. Lee*, J. G. Lee, J. K. Lee, S. M. Hong, S. H. Lee, J. J. Park, J. W. Kim and C. K. Rhee: “Formation of interfacial brittle phases: sigma phase and IMC in hybrid titanium-to stainless steel joint”, Trans. Nonferrous Met. Soc. China, 21 (2011), pp. s7-s11.
26. M. K. Lee*, J. J. Park, G. J. Lee, J. G. Lee, D. W. Kim, C. H. Lim, C. K. Rhee, Y. B. Lee, J. K. Lee, S. J. Hong: “Corrosion of Ti-STS dissimilar joints brazed by a Ag interlayer and Ag-Cu-(Pd) alloy filler”, J. Nucl. Mater., 409 (2011), pp. 183-187.
25. J. G. Lee*, J. K. Lee, S. M. Hong, M. K. Lee, and C. K. Rhee: “Microstructure and bonding strength of titanium-to-stainless steel joints brazed using a Zr-Ti-Ni-Cu-Be amorphous filler alloy”, J. Mater. Sci., 45 (2010), pp. 6837-6840.
24. J. G. Lee*, S. M. Hong, J. J. Park, M. K. Lee, S. J. Hong, U. H. Joo and C. K. Rhee: “High energy ball-mill behavior of titania+hydroxyapatite composite nano-powders”, Mater. Character., 61 (2010), pp. 1290-1293.
23. J. G. Lee*, S. J. Hong, J. J. Park, M. K. Lee, V. V. Ivanov and C. K. Rhee: “Fabrication of an Yttria thin-wall tube by radial magnetic pulsed compaction of powder-based tapes”, Mater. Trans., 51 (2010), pp. 1689-1693.
22. M. K. Lee*, J. G. Lee, Y. H. Choi, D. W. Kim, C. K. Rhee, Y. B. Lee and S. J. Hong: “Interlayer engineering for dissimilar bonding of titanium to stainless steel”, Mater. Lett., 64 (2010), pp. 1105-1108.
21. H. S. Kim, J. G. Lee, C. K. Rhee, U. H. Joo and S. J. Hong*: “Densification of TiO2 Nanopowders by Magnetic Pulsed Compaction”, Mater. Trans., 51 (2010), pp. 578-581.
20. J. G. Lee*, G. H. Kim, M. K. Lee and C. K. Rhee: “Intermetallic formation in a Ti-Cu dissimilar joint brazed using a Zr-based amorphous alloy filler”, Intermetallics, 18 (2010), pp. 529-535.
19. J. G. Lee*, M. K. Lee, S. J. Hong, H. W. Lee, S. P. Pyun and C. K. Rhee: “Consolidation of mixed diamond and cobalt granule powders by magnetic pulsed compaction”, Mater. Lett., 64 (2010), pp. 35-37.
18. J. G. Lee*, Y. H. Choi, J. K. Lee, G. J. Lee, M. K. Lee and C. K. Rhee: “Low-temperature brazing of titanium by the application of a Zr-Ti-Ni-Cu-Be bulk metallic glass (BMG) alloy as a filler”, Intermetallics, 18 (2010), pp. 70-73.
17. S. J. Hong*, J. M. Koo, J. G. Lee, M. K. Lee, H. H. Kim, C. K. Rhee: “Precompaction Effects on Density and Mechanical Properties of Al2O3 Nanopowder Compacts Fabricated by Magnetic Pulsed Compaction”, Mater. Trans., 50 (2009), pp. 2885-2890.
16. J. G. Lee, S. J. Hong, M. K. Lee* and C. K. Rhee: “High strength bonding of titanium to stainless steel using an Ag interlayer”, J. Nucl. Mater., 395 (2009), pp. 145-149.
15. K. B. Kim, J. G. Lee, J. K. Lee, S. W. Son, M. K. Lee*, S. J. Kim and C. K. Rhee: “Formation of reactive layers in brazed Ti and Cu using a melt-spun Zr41.2Ti13.8Ni10.0Cu12.5Be22.5 alloy”, Mater. Lett., 62 (2008), pp. 4483-4485.
14. M. K. Lee*, J. G. Lee, J. K. Lee, J. J. Park, G. J. Lee, Y. R. Uhm and C. K. Rhee: “Strong bonding of titanium to copper through the elimination of the brittle interfacial intermetallics”, J. Mater. Res., 23 (2008), pp. 2254-2263.
13. K.-H. Kim, J. G. Lee, G. T. Bae, J. H. Bae and N. J. Kim*: “Mechanical properties and microstructure of twin-roll cast Mg-Zn-Y alloy”, Mater. Trans., 49 (2008), pp. 980-985.
12. C. Shin*, H. H. Jin, J. G. Lee, D-J. Lee, C-K. Rhee and J-H. Hong: “Expansion of a Low Conductive Metal Tube by an Electromagnetic Forming Process: Finite Element Modeling”, Met. Mat. Int., 14 (2008), pp. 91-97.
11. J. G. Lee, K-S. Sohn, S. Lee*, N. J. Kim and C. P. Kim: “In situ fracture observation and fracture toughness analysis of Zr-based bulk amorphous alloys”, Mater. Sci. Eng. A, 464 (2007), pp. 261-268.
10. Y. S. Oh, H. Lee, J. G. Lee and N. J. Kim*: “Twin-roll strip casting of iron-base amorphous alloys”, Mater. Trans., 48 (2007), pp. 1584-1588.
09. J. G. Lee, H. S. Kim, S. Lee and N. J. Kim*: “Deformation behavior of strip-cast bulk amorphous matrix composites containing various crystalline particles”, Mater. Sci. Eng. A, 449-451 (2007), pp. 176-180.
08. J. G. Lee, H. Lee, Y. S. Oh, S. Lee and N. J. Kim*: “Continuous fabrication of bulk amorphous alloy sheets by twin-roll strip casting”, Intermetallics, 14 (2006), pp. 987-993.
07. S. S. Park, J. G. Lee and N. J. Kim*: “Development of high performance alloy sheets by strip casting”, T. Indian I. Metals, 58 (2005), pp. 687-693
06. J. G. Lee, S. S. Park, S. B. Lee, H-T. Chung and N. J. Kim*: “Sheet fabrication of bulk amorphous alloys by twin-roll strip casting”, Scripta Mater., 53 (2005), pp. 693-697.
05. J. G. Lee, D-G. Lee, S. Lee*, K-M. Cho, I. Park and N. J. Kim: “Effects of crystalline particles on the mechanical properties of strip-cast Zr-base bulk amorphous alloy”, Mater. Sci. Eng. A, 390 (2005), pp. 427-436.
04. J. G. Lee, D-G. Lee, S. Lee* and N. J. Kim: “In-situ Microfracture Observation of Strip-Cast Zr-Ti-Cu-Ni-Be Bulk Metallic Glass Alloys”, Metall. Mater. Trans. A, 35A (2004), pp. 3753-3761.
03. J. G. Lee, S. S. Park, D-G. Lee, S. Lee and N. J. Kim*: “Mechanical Property and Fracture Behavior of Strip Cast Zr-base BMG Alloy Containing Crystalline Phase”, Intermetallics, 12 (2004), pp. 1125-1131.
02. S. S. Park, J. G. Lee and N. J. Kim*: “Strip Casting of High Performance Structural Alloys”, J. Rare Earths, 22(s) (2004), pp. 78-84.
01. J. Oh, J. G. Lee, N. J. Kim, S. Lee* and E. W. Lee: “Effects of Thickness on Fatigue Properties of Investment Cast Ti-6Al-4V Alloy Plates”, J. Mater. Sci. 39 (2004), pp. 587-591.