Bài báo quốc tế thuộc danh mục SCIE
1. Diep, H. T., Jang, M., Moon, J., and Choi, B. H. (2022). Numerical Analysis on Plastic Moment Capacity of Prefabricated Steel Girders with Injection Channel Connections. International Journal of Steel Structures, 22 (6), 1722–1733.
2. Diep, H. T., Moon, J., and Choi, B. H. (2023). Structural Performance of Prefabricated Composite Girders for Railway Bridges along with Girder-to-Deck Interface Connections for Mechanical Injection. Applied Sciences, 13 (11), 6686.
3. Diep, H. T., and Choi, B. H. (2023). Shear Transfer Resistance with Different Interface Conditions: Evaluation of Design Provisions and Proposed Equation. Applied Sciences, 13 (14), 8203.
4. Choi, B. H., Diep, H. T., and Moon, J. (2024). Flexural Performance of Prefabricated Composite Girders along with Precast Deck-to-Girder Continuous Connections. International Journal of Steel Structures, 24 (1), 95–108.
5. Choi, B. H., Kwak J., and Diep, H. T. (2024). Effect of Strut Stiffness on Seismic Performance of Fully Integral Steel Bridge with a Strut-Braced Pier. International Journal of Steel Structures, 24 (2), 366–376.
Bài báo quốc tế khác
1. Choi, B. H., Diep, H. T., Kim H., and Moon, J. (2025). Development of a Structural-Performance-Evaluation Process of Girders with Prefabricated Continuous Precast Deck-to-Girder Connections and Their Analytical Evaluation. Journal of the Korean Society of Hazard Mitigation, 25 (4), 119–128.
Báo cáo tại hội nghị quốc tế/quốc gia
1. Diep, H. T., Thusa, B., Kim, G, Kim, H., and Choi, B. H. (2025). Studies on the Effect of Interface Properties on the Structural Behavior of Steel Composite Girders with Prefabricated Deck-to-Girder Continuous Connections. Proceedings of the 13th International Symposium on Steel Structures and the 14th Pacific Structural Steel Conference, pp. 381–384. ISSS-PSSC 2025. Jeju, Korea.
2. Diep, H. T., Kim, H., Moon, J., and Choi, B. H. (2025). Shear Resistance of Non-interference Interface Connections of Prefabricated Railway Girder Bridges for Off-Site Construction. Proceedings of the 13th International Symposium on Steel Structures and the 14th Pacific Structural Steel Conference, pp. 530–533. ISSS-PSSC 2025. Jeju, Korea.
3. Choi, B. H., Diep, H. T., Park, S. G., and Moon, J. (2025). Design Guideline of Prefabricated Composite Girders with Non-interference Connections for Off-Site Construction of Highway Bridges. Proceedings of the 13th International Symposium on Steel Structures and the 14th Pacific Structural Steel Conference, pp. 385–388. ISSS-PSSC 2025. Jeju, Korea.
4. Diệp Thành Hưng (2025). Nghiên cứu ảnh hưởng của hình học mối nối đến ứng xử uốn của dầm liên hợp lắp ghép với mối nối liên tục giữa bản đúc sẵn và dầm. Hội nghị Khoa học Công nghệ lần thứ XXIV, Phân hiệu tại TP Hồ Chí Minh, Trường Đại học Giao thông vận tải. TP Hồ Chí Minh, Việt Nam.
5. Diep, H. T., Jang, M., Kim, J. S., Moon, J., and Choi, B. H. (2021). Numerical Analysis on Plastic Moment Capacity of Prefabricated Steel Girders with Injection Channel Connections. Proceedings of the 11th International Symposium on Steel Structures, pp. 91–93. ISSS 2021. Jeju, Korea.
6. Jang, M., Diep, H. T., Kim, J. S., Moon, J., and Choi, B. H. (2021). An Experimental Study on Plastic Moment Capacity of Prefabricated Steel Girders Bridge with Injection Channel Connections. Proceedings of the 11th International Symposium on Steel Structures, pp. 76–78. ISSS 2021. Jeju, Korea.
7. Ngô Châu Phương, Diệp Thành Hưng, và Nguyễn Đức Hiếu (2019). Kinh nghiệm xây dựng cầu dây văng giao thông nông thôn ở đồng bằng sông Cửu Long từ chương trình Nhịp cầu ước mơ. Kỷ yếu Hội thảo các Trường Đại học Kỹ thuật với hoạt động khởi nghiệp và đổi mới sáng tạo của tỉnh Bến Tre, tr. 29–37, Câu lạc bộ Khoa học và Công nghệ các trường đại học kỹ thuật lần thứ 55. Bến Tre, Việt Nam.
Google Scholar: https://scholar.google.com/citations?user=mXNrZ-IAAAAJ&hl=en&oi=ao