Sukri, H., Ibadillah, A.F., Thinakaran, R., Umam, F., Dafid, A., Kurniawan, A., Morshed, M.M., Kurniawan, D. (2025) Enhanced Precision Control of a 4-DOF Robotic Arm Using Numerical Code Recognition for Automated Object Handling. Journal of Robotics and Control. 6(1): 315-335. [link]
Ngadiman, N.H.A., Mustafa, N.S., Sudin, I., Kurniawan, D. (2025) Young’s Modulus Optimisation of Triply Periodic Minimal Surfaces using Full Factorial Design. International Journal of Industrial Engineering & Production Research. 36(1): 171-180. [link]
Sukri, H., Ibadillah, A.F., Thinakaran, R., Umam, F., Dafid, A., Kurniawan, A., Morshed, M.M., Kurniawan, D. (2025) Enhanced Precision Control of a 4-DOF Robotic Arm Using Numerical Code Recognition for Automated Object Handling. Journal of Robotics and Control. 6(1): 315-335. [link]
Ngadiman, N.H.A., Mustafa, N.S., Sudin, I., Kurniawan, D. (2025) Young’s Modulus Optimisation of Triply Periodic Minimal Surfaces using Full Factorial Design. International Journal of Industrial Engineering & Production Research. 36(1): 171-180. [link]
Patar, M.A.A., Suhaimi, M.A., Sharif, S., Kurniawan, D., Mohruni, A.S., Kejia, Z. (2024) Machinability Assessment of 3D-Printed CoCrMo Plate: Influence of Micro-drill Bit Designs. Journal of Applied Science and Engineering. 27(11): 3397-3405. [link]
Halim, J.A., Kurniawan, D., Laila, D.S., Norjemee, A., Nesseruddin, N.A.L., Noraidi, A.A., Nore, B.F. (2023) Non-Invasive Digital Refractometer to Measure Maturation of Climacteric Fruits. ASEAN Journal on Science and Technology for Development. 40(3):2. [link]
Nur, R., Yusof, N.M., Sudin, I., Nor, F.M., Kurniawan, D.* (2021) Determination of Energy Consumption during Turning of Hardened Stainless Steel Using Resultant Cutting Force. Metals. 11: 565. [link]
Nor, F.M., Lim, J.Y., Tamin, M.N., Lee, H.Y., Kurniawan, D. (2020) Effects of Starter Defect on Energy Release Rate of Three-Point End-Notch Flexure Tested Unidirectional Carbon Fiber Reinforced Polymer Composite. Polymers. 12: 904. [link]
Hii, V.Y.M., Nor, F.M., Kurniawan, D. (2019) Scylla Serrata Shells Calcination using Electric Furnace and Microwave Kiln. International Journal of Engineering and Advanced Technology. 8: 500-504. [link]
Hassan, A.W., Noordin, M.Y., Izman, S., Kurniawan, D., Nazim, E. M. (2019) Modification of an Electroplated Nickel Interlayer Surface by Annealing Heat Treatment for Diamond Deposition on Tungsten Carbide. Metallography, Microstructure, and Analysis. 8: 201-211 [link]
Ngadiman, N.H.A., Yusof, N.M., Idris, A., Fallahiarezoudar, E., Kurniawan, D. (2018) Novel Processing Technique to Produce Three Dimensional Polyvinyl Alcohol/Maghemite Nanofiber Scaffold Suitable for Hard Tissues. Polymers. 10: 353. [link]
Hassan, A.W., Noordin, M.Y., Izman, S., Kurniawan, D. (2018) Effect of carburizing and annealing processes in improving the Ni/WC–Co adhesion strength. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 232: 338-348. [link]
Nur, R., Noordin, M.Y., Izman, S., Kurniawan, D. (2017) Machining Parameters Effect in Dry Turning of AISI 316L Stainless Steel using Coated Carbide Tools. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 231: 676-683. [link]
Dambatta, M.S., Izman, S., Kurniawan, D., Hermawan, H. (2017) Processing of Zn-3Mg Alloy by Equal Channel Angular Pressing for Biodegradable Metal Implants. Journal of King Saud University-Science. 29: 455-461. [link]
Ngadiman, N.H.A., Noordin, M.Y., Idris, A., Kurniawan, D.* (2017) A Review of Evolution of Electrospun Tissue Engineering Scaffold: From Two Dimensions to Three Dimensions. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 231: 597-616. [link]
Ngadiman, N.H.A., Yusof, N.M., Idris, A., Kurniawan, D., Fallahiarezoudar, E. (2017) Fabricating High Mechanical Strength γ-Fe2O3 Nanoparticles Filled Polyvinyl Alcohol Nanofiber using Electrospinning Process Potentially for Tissue Engineering Scaffold. Journal of Bioactive and Compatible Polymers. 32: 411-428. [link]
Ngadiman, N.H.A., Yusof, N.M., Idris, A., Misran, E., Kurniawan, D. (2017) Development of Highly Porous Biodegradable γ-Fe2O3/Polyvinyl Alcohol Nanofiber Mats using Electrospinning Process for Biomedical Application. Materials Science and Engineering: C. 70: 520-534. [link]
Hassan, A., Noordin, M.Y., Izman, S., Kurniawan, D. (2016) Influence of Microwave and Conventional Annealing Processes in Improving an Electrodeposited Nickel Interlayer Characteristics. Metallurgical and Materials Transactions A. 47: 4951-4959. [link]
Ngadiman, N.H.A., Yusof, N.M., Idris, A., Kurniawan, D. (2016) Mechanical Properties and Biocompatibility of Co-axially Electrospun Polyvinyl Alcohol/Maghemite. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 230: 739-749. [link]
Nor, F.M., Lee, H.Y., Lim, J.Y., Kurniawan, D.* (2016) Strain Rate and Temperature Effects on Elastic Properties of Polycaprolactone/Starch Composite. e-Polymers. 16: 217-223. [link]
Hassan, A.W., Noordin, M.Y., Izman, S., Zakiah, K., Engku, M.N., Kurniawan, D. (2016) Effect of Carburizing Process in Enhancing Nickel Interlayer Adhesion to WC-6% Co-Substrate and Promoting Diamond Nucleation and Growth. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications. 230: 620-626. [link]
Dambatta, M.S., Kurniawan, D., Izman, S., Yahaya, B., Hermawan, H. (2016) Influence of Homogenization Treatment on the Degradation Behavior of Zn–3 Mg Alloy in Simulated Body Fluid Solution. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications. 230: 615-619. [link]
Noordin, M.Y., Jiawkok, N. Ndaruhadi, P.Y.M.W., Kurniawan, D.* (2015) Machining of Bone: Analysis of Cutting Force and Surface Roughness by Turning Process. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 229: 761-768. [link]
Dambatta, M.S., Izman, S., Kurniawan, D., Farahany, S., Yahaya, B., Hermawan, H. (2015) Influence of Thermal Treatment on Microstructure, Mechanical and Degradation Properties of Zn–3Mg Alloy as Potential Biodegradable Implant Material. Materials & Design. 85: 431-437. [link]
Elmunafi,M.H.S., Noordin, M.Y., Kurniawan, D. (2015) Effect of Cutting Speed and Feed in Turning Hardened Stainless Steel Using Coated Carbide Cutting Tool under Minimum Quantity Lubrication Using Castor Oil. Advances in Mechanical Engineering. 7(8): 1-7. [link]
Dambatta, M.S., Izman, S., Yahaya, B., Lim, J.Y., Kurniawan, D.* (2015) Mg-Based Bulk Metallic Glasses for Biodegradable Implant Materials: A Review on Glass Forming Ability, Mechanical Properties, and Biocompatibility. Journal of Non-Crystalline Solids. 426: 110-115. [link]
Kurniawan, D.*, Kim, B.S., Lee, H.Y., Lim, J.Y. (2015) Towards Improving Mechanical Properties of Basalt Fiber/Polylactic Acid Composites by Fiber Surface Treatments. Composite Interfaces. 22: 553-562. [link]
Ngadiman, N.H.A., Idris, A., Irfan, M., Kurniawan, D., Yusof, N.M., Nasiri, R. (2015) γ-Fe2O3 Nanoparticles Filled Polyvinyl Alcohol as Potential Biomaterial for Tissue Engineering Scaffold. Journal of the Mechanical Behavior of Biomedical Materials. 49: 90-104. [link]
Dambatta, M.S., Murni, N.S., Izman, S., Kurniawan, D.*, Froemming, G.R.A., Hermawan, H. (2015) In Vitro Degradation and Cell Viability Assessment of Zn–3Mg Alloy for Biodegradable Bone Implants. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 229: 335-342. [link]
Fadzir, M.F.A.A., Bakar,A.B.A., Kurniawan, D.* (2015) Mitigation Of Microbiologically Induced Corrosion due to Sulphate Reducing Bacteria by Chemicals, Coatings, and Cathodic Protection. Jurnal Mekanikal. 38:122-127 [link]
Hashemi, H., Shaharoun, A.M., Izman, S., Kurniawan, D. (2014) Recent Developments on Computer Aided Fixture Design: Case Based Reasoning Approaches. Advances in Mechanical Engineering. 2014: 484928. [link]
Safari, H., Sharif, S., Izman, S., Jafari, H., Kurniawan, D. (2014) Cutting Force and Surface Roughness Characterization in Cryogenic High-Speed End Milling of Ti-6Al-4V ELI. Materials and Manufacturing Processes. 29: 350-356. [link]
Wahab, H.A., Noordin, M.Y., Izman, S., Kurniawan, D. (2013) Quantitative Analysis of Electroplated Nickel Coating on Hard Metal. The Scientific World Journal. 2013: 631936.[link]
Kurniawan, D.*, Kim, B.S., Lee, H.Y., Lim, J.Y. (2013) Effect of Silane Treatment on Mechanical Properties of Basalt Fiber/Polylactic Acid Ecofriendly Composites. Polymer-Plastics Technology and Engineering. 52: 97-100. [link]
Kurniawan, D., Kim, B.S., Lee, H.Y., Lim, J.Y. (2013) Effects of Repetitive Processing, Wood Content, and Coupling Agent on the Mechanical, Thermal, and Water Absorption Properties of Wood/Polypropylene Green Composites. Journal of Adhesion Science and Technology. 27: 1301-1312. [link]
Nor, F.M., Kurniawan, D.*, Seo, Y.-K., Park, J.-K., Lee, H.Y., Lim, J.Y. (2012) Polycaprolactone / Starch Blends with Corn Based Coupling Agent: Physical Properties and In Vitro Analysis. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 226: 693-698. [link]
Kurniawan, D., Nor, F.M., Lee, H.Y., Lim, J.Y. (2012) Finite Element Analysis of Bone-Implant Biomechanics: Refinement through Featuring Various Osseointegration Conditions. International Journal of Oral & Maxillofacial Surgery. 41: 1090-1096. [link]
Kurniawan, D., Kim, B.S., Lee, H.Y., Lim, J.Y. (2012) Atmospheric Pressure Glow Discharge Plasma Polymerization for Surface Treatment on Basalt Fiber/Polylactic Acid Composites. Composites Part B. 43: 1010-1014. [link]
Noordin, M.Y., Kurniawan, D., Tang, Y.C., Muniswaran, K. (2012) Feasibility of Mild Hard Turning of Stainless Steel Using Coated Carbide Tool. International Journal of Advanced Manufacturing Technology. 60: 853-863. [link]
Kurniawan, D., Nor, F.M., Lee, H.Y., Lim, J.Y. (2011) Elastic Properties of Polycaprolactone at Small Strains are Significantly Affected by Strain Rate and Temperature. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 225: 1015-1020. [link]
Kurniawan, D., Noordin, M.Y., Sharif, S. (2010) Hard Machining of Stainless Steel Using Wiper Coated Carbide: Tool Life and Surface Integrity. Materials and Manufacturing Processes. 25: 370-377. [link]
Noordin, M.Y., Zainal, A.M., Hendriko, Kurniawan, D. (2008) Hard Turning of Cold Work Tool Steel Using Wiper Ceramic Tool. Jurnal Mekanikal. 25: 92-105. [link]
Noordin, M.Y., Kurniawan, D., Sharif, S. (2007) Hard Turning of Stainless Steel Using Wiper Coated Carbide Tool. International Journal of Precision Technology. 1: 75-84. [link]
Noordin, M.Y., Tang, Y.C., Kurniawan, D. (2007) The Use of TiAlN Coated Carbide Tool When Finish Machining Hardened Stainless Steel. International Journal of Precision Technology. 1: 21-29. [link]
Malaysian Patent application no. PI2019007911 Dental Implant Fixture with High Surface Area. (Filing Date: 31 December 2019)
US Patent (Provisional) Application No. US 61/618,842 Dental Implant Fixture with High Surface Area and Effective Load Transfer Capability. (Filing date: April 4, 2012)
> 90 proceedings and abstracts
Dambatta, M.S., Izman, S., Auwal, S.T., Kurniawan, D., Ramesh, S., Abdullahi, U., ... & Ibrahim, M. A. (2023) Improving microstructural homogeneity and reducing grain size of Zn-3Mg alloy through ECAP. AIP Conference Proceedings. 2643; 050011. [link]
Ramli, M.N.A., Ya'akub, S.R., Kurniawan, D., Suhaili, W.S., Morni, M., Petra, R., Mohammad, I. (2023) Design of floatation water gate for paddy field irrigation. AIP Conference Proceedings. 2643; 050076. [link]
Ibrahim, M. A., Tambaya, M., Yusuf, A. G., Auwal, S. T., Kurniawan, D., Ramesh, S. (2023, May). Parametric Study on Abrasive Wear of Reinforced Polytetrafluroethylene Composites Using Taguchi Model. In Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia (pp. 191-197). Singapore: Springer Nature Singapore. [link]
Kunya, B. I., Alhassan, Y., Auwal, S. T., Tambaya, M., Kurniawan, D., Ramesh, S. (2023, May). Energy Cost Characteristics of a Micro-Wind Power System Based on Different Capacity Factor: A Case Study of Locations in Nigeria. In Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia (pp. 183-189). Singapore: Springer Nature Singapore. [link]
Sara Lee, K. Y., Ramesh, S., Siah, L. F., Nor Azmah, A. K., Teng, W. D., Mubarak, N. M., Kurniawan, D. (2023, May). Properties of Alumina–Zirconia Composites Prepared by Slip-Casting Method. In Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia (pp. 155-160). Singapore: Springer Nature Singapore. [link]
Ahat, M. H., Nor, F. M., Ramesh, S., Kurniawan, D.* (2023, May). Perforation Size Effect on Lotus Leaf Based Oil/Water Separator. In Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia (pp. 579-584). Singapore: Springer Nature Singapore. [link]
Nor, F. M., Teh, Z. S., Kurniawan, D.* (2023). Finite element analysis on mechanical performance of amalgam, gold, and bioglass dental filling materials in molar tooth. Materials Today: Proceedings. [link]
Koh, A. Y. M., Nor, F. M., Ramesh, S., & Kurniawan, D.* (2023). Plasticisers for edible packaging made of thermoplastic sago starch. Materials Today: Proceedings. [link]
Kua, C.H., Yunos, N.A.A., Petra, R., Nor, F.M., Kurniawan, D.* (2022) Design and fabrication of laboratory scale carbon dioxide controlling chamber for leafy vegetables. Lecture Notes in Networks and Systems. 335: 46–56. [link]
Mook, R.W.C., Ya’akub, S.R., Nor, F.M., Kurniawan, D.* (2022) Hydrophobic coating of plywood using natural oils and waxes. Lecture Notes in Networks and Systems. 335: 169–179. [link]
Yeo, L.M., Kurniawan, D.* (2020) Parameters related to seawater conditions and electrodeposition setting on the growth of formation of calcareous deposit: A review. AIP Conference Proceedings. 2262: 040020. [link] [Accepted version]
Omar, Z.F., Kurniawan, D.* (2020) Effect of water treatment on AISI 316L stainless steel biocorrosion resistance. AIP Conference Proceedings. 2262: 070001. [link]
Abdelrhman, A.M., Ying, L., Ali, Y.H., Ahmad, I., Georgantopoulou, C.G., Nor, F.M., Kurniawan, D. (2020) Diagnosis model for bearing faults in rotating machinery by using vibration signals and binary logistic regression. AIP Conference Proceedings. 2262: 030014. [link]
Nor, F.M., Osman, N., Kurniawan, D.* (2020) Finite element analysis of repetitive corrugation and straightening die designs for severe plastic deformation of magnesium alloy. AIP Conference Proceedings. 2262: 030017. [link]
Nor, F.M., Sidek, M.A., Aji, D.B.P., Kurniawan, D.* (2020) Finite element analysis of multidirectional forging dies for severe plastic deformation of magnesium alloy. AIP Conference Proceedings. 2262: 030019. [link]
Elmunafi, M.H.S., Noordin, M.Y., Elshwain, A.E., Kurniawan, D.* (2020) Influence of cutting condition on chip morphology when turning hardened stainless steel using coated carbide cutting tools under minimum quantity of lubrication. AIP Conference Proceedings. 2262: 060001. [link]
Nor, F.M., Isa, A.L.M., Zulkipli,Z., Aji, D.P.B, Kurniawan, D. (2020) Effect of cooling rate and aging duration on microstructure of tin-copper solder joint. AIP Conference Proceedings. 2262: 070004. [link]
Sabri, S.S.M., Izman, S., Kurniawan, D.* (2020) Perovskite materials for intermediate temperature solid oxide fuel cells cathodes: A review. AIP Conference Proceedings. 2262: 030013. [link]
Kamaluddin, S., Kurniawan, D., Bakar, M.S.A., Samah, Z.A. (2020) Biochar as a conducting filler to enhance electrical conduction monitoring for concrete structures. Key Engineering Materials. 847: 149-154. [link]
Sultan, A.Z., Sharif, S., Kurniawan, D.* (2020) Drilling of AISI 316L stainless steel: Effect of coolant condition on surface roughness and tool wear. AIP Conference Proceedings. 2217: 020004. [link]
Desmond, S., Kurniawan, D., Nor, F.M. (2020) Synthesis of hydroxyapatite from seashells via calcination at various temperature using microwave and furnace. AIP Conference Proceedings. 2217: 020010. [link]
Saliza Azlina, O., Ruba'ai, M.S., Kurniawan, D.* (2019) Effect of magnesium fluoride coating on corrosion behaviour of magnesium alloy. IOP Conference Series: Materials Science and Engineering. 694: 012049. [link]
Abdelrhman, A.M., Gan, W.W., Kurniawan, D.* (2019) Effect of part orientation on dimensional accuracy, part strength, and surface quality of three dimensional printed part. IOP Conference Series: Materials Science and Engineering. 694: 012048. [link]
Soliheen, M.A.M., Kadir, A.Z.A., Kurniawan, D., Nor, F.M. (2019) Comparative study on stress analysis in human molar tooth between metallic and nonmetallic dental filling material. IOP Conference Series: Materials Science and Engineering. 694: 012047. [link]
Hisam, M.J., Sharif, S., Suhaimi, M.A., Kurniawan, D., Nor, F.M., Shayfull, Z. (2019) Peri-implant bone biomechanics featuring short implant design. AIP Conference Proceedings. 2129: 020059. [link]
Sultan, A.Z., Sharif, S., Nor, F.M., Kurniawan, D.* (2019) Minimum quantity of lubricant drilling of stainless steel using refined palm olein: Effect of coating tool on surface roughness and tool wear. Procedia Manufacturing. 30: 427-434. [link]
Hisam, M.J., Zaman, I., Sharif, S., Kurniawan, D., Nor, F.M. (2019) Finite element analysis of mini implant biomechanics on peri-implant bone. Procedia Manufacturing. 30: 308-314. [link]
Elshwain, A.E., Elmunafi, M.H., Yusof, N.M., Redzuan, N., Kurniawan, D., Wahab, H.A., Mohamed, Y.A. (2017) Machinability of Stainless Tool Steel using Nitrogen Oil-Mist Coolant. Вестник Воронежского государственного университета инженерных технологий. 79: 143-147. [link]
Zaman, H.A., Sharif, S., Idris, M.H., Kurniawan, D. (2017) Effect of High Speed End Milling of Co-28Cr-6Mo Cobalt Chromium Molybdenum Alloy using Uncoated and Coated Carbide Tools. Journal of Engineering and Applied Sciences. 12: 945-949. [link]
Kurniawan, D. (2016) Mechanical Properties of Polylactic Acid/Zein/Lyocell Composite. 2nd Composite Materials and Manufacturing Symposium (CMMS 2016). November 13-14. Kuala Lumpur, Malaysia: Universiti Teknologi Malaysia. [Abstract only]
Saliza Azlina O., Kamarul Ariffin, C.M., Ibrahim, M.H.I., Kurniawan, D. (2016) Effect of Cutting Speed on Bio-corrosion of AISI 316L Stainless Steel. ARPN Journal of Engineering and Applied Sciences. 11: 11178-11182. [link]
Elmunafi, M.H.S., Noordin, M.Y., Kurniawan, D. (2015) Tool Life of Coated Carbide Cutting Tool when Turning Hardened Stainless Steel under Minimum Quantity Lubricant using Castor Oil. Procedia Manufacturing. 2: 563-567. [link]
Samsudin, M.H.M., Kurniawan, D., Nor, F.M. (2015) Strain Distribution Equal Channel Angular Pressing of Magnesium alloy at 90° and 120° Corner Angles. Procedia Manufacturing. 2: 230-235. [link]
Redzuan, N.,Kurniawan, D. (2015) Evaluation of Hole Quality on Microdrilling AISI304 Austenitic Stainless Steel. Procedia Manufacturing. 2: 465-469. [link]
Ngadiman, N.H.A., Noordin, M.Y., Idris, A., Shakir, A.S.A., Kurniawan, D. (2015) Influence of Polyvinyl Alcohol Molecular Weight on the Electrospun Nanofiber Mechanical Properties. Procedia Manufacturing. 2: 568-572. [link]
Sultan, A.Z., Sharif, S., Kurniawan, D. (2015) Effect of Machining Parameters on Tool Wear and Hole Quality of AISI 316L Stainless Steel in Conventional Drilling. Procedia Manufacturing. 2: 202-207. [link]
Nur, R., Kurniawan, D., Noordin, M.Y., Izman, S. (2015) Optimizing Power Consumption for Sustainable Dry Turning of Treated Aluminum Alloy. Procedia Manufacturing. 2: 558-562. [link]
Zahari, W.Z.W., Badri, R., Ardyananta, H., Kurniawan, D., Nor, F.M. (2015) Mechanical Properties and Water Absorption Behavior of Polypropylene/Ijuk Fiber Composite by Using Silane Treatment. Procedia Manufacturing. 2: 573-578. [link]
Hisam, M.J., Lim, J.Y., Kurniawan, D., Nor, F.M. (2015) Stress Distribution Due to Loading on Premolar Teeth Implant: A Three Dimensional Finite Element Analysis. Procedia Manufacturing. 2: 218-223. [link]
Ndaruhadi, P., Sharif, S., Kurniawan, D. (2015) Effect of Different Cutting Speed and Feed Rate on Surface Roughness in Femur Bone Drilling. Procedia Manufacturing. 2: 208-211. [link]
Khoo, W., Nor, F.M., Ardhyananta, H., Kurniawan, D. (2015) Preparation of Natural Hydroxyapatite from Bovine Femur Bones Using Calcination at Various Temperatures. Procedia Manufacturing. 2: 196-201. [link]
Sultan, A.Z., Sharif, S., Kurniawan, D. (2015) Chip Formation When Drilling AISI 316L Stainless Steel using Carbide Twist Drill. Procedia Manufacturing. 2: 224-229. [link]
Soliheen, M.A.M., Kurniawan, D., Nor, F.M. (2015) Stress Distribution between Bonding Surface of Dental Filling in Enamel and Dentine. Procedia Manufacturing. 2: 212-217. [link]
Elshwain, A.E.I., Handawi, M., Redzuan, N., Noordin, M.Y., Kurniawan, D. (2015) Performance Comparison between Dry and Nitrogen Gas Cooling when Turning Hardened Tool Steel with Coated Carbide. Applied Mechanics and Materials. 735: 65-69. [link]
Wardoyo, T.T.B., Izman, S., Sharif, S., Ardhyananta, H., Kurniawan, D. (2015) Mechanical Properties of Shielded Metal Arc Welded Low Carbon Steel: Effect of Butt Joint Type and Uncapping of Excess Weldment. Advanced Materials Research. 1125: 195-199. [link]
Dambatta, M.S., Kurniawan, D., Izman, S., Yahaya, B., Hermawan, H. (2015) Review on Zn-Mg Alloys as Potential Biodegradable Medical Devices Materials. Applied Mechanics and Materials. 776: 277-281. [link]
Elmunafi, M.H.S., Kurniawan, D., Noordin, M.Y. (2015) Use of Castor Oil as Cutting Fluid in Machining of Hardened Stainless Steel with Minimum Quantity of Lubricant. Proceedia CIRP. 26: 408-411. [link]
Najarian, F., Noordin, M.Y., Nor, F.M., Kurniawan, D. (2014) Analysis of Deep Hole Drilling in Presence of Electromagnetic Field Using Taguchi Technique. Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition. November 14-20. Montreal, Canada: ASME. IMECE2014-40139. [link]
Handawi, M., Elshwain, A.E., Yusof, N.M., Redzuan, N., Kurniawan, D. (2014) Comparison between Nitrogen-Oil-Mist and Air-Oil-Mist Condition when Turning of Hardened Tool Stainless Steel. Applied Mechanics and Materials. 660: 18-22.
Elmunafi, M.H.S., Noordin, M.Y., Nor, F.M., Kurniawan, D. (2014) Turning of Hardened Martensitic Stainless Steel with Minimum Quantity of Lubricant Using Castor Oil. Proceedings of the International Symposium on Green Manufacturing and Applications 2014. Jun 24-28. Busan: Korean Society for Precision Engineering, D-7-4. [Abstract only]
Dambatta, M.S., Izman, S., Hermawan, H., Kurniawan, D. (2014) Effect of Heat Treatment on Microstructure Homogeneity of Zn-3Mg Alloy. Applied Mechanics and Materials. 493: 777-782.
Sharif, S., Safari, H., Izman, S., Kurniawan, D. (2014) Effect of High Speed Dry End Milling on Surface Roughness and Cutting Forces of Ti-6Al-4V ELI. Applied Mechanics and Materials. 493: 546-551.
Ardhyananta, H., Baiti, R.N., Afrianto, M.A., Kurniawan, D. (2014) Analysis of Fiber Glass/Vinyl Ester Composite Subjected to Internal Pressure Loading for Compressed Natural Gas (CNG) Tube Type IV Application. Applied Mechanics and Materials. 493: 645-650.
Nor, F.M., Lee, H.Y., Lim, J.Y., Tamin, M.N., Kurniawan, D. (2014) Effect of Starter Defect to GIIC of Unidirectional CFRP Composite. Applied Mechanics and Materials. 493: 773-776.
Nur, R., Noordin, M.Y., Izman, S., Kurniawan, D. (2014) The Effect of Cutting Parameters on Power Consumption during Turning Nickel Based Alloy. Advanced Materials Research. 845: 799-802.
Ndaruhadi, P.Y.M.W., Sharif, S., Noordin, M.Y., Kurniawan, D. (2014) Effect of Cutting Parameters on Surface Roughness in Turning of Bone. Advanced Materials Research. 845: 708-712.
Wardoyo, T.T.B., Izman, S., Kurniawan, D. (2014) Effect of Butt Joint on Mechanical Properties of Welded Low Carbon Steel. Advanced Materials Research. 845: 775-778.
Dambatta, M.S., Izman, S. Hermawan, H., Kurniawan, D. (2014) Influence of Heat Treatment Cooling Mediums on the Degradation Property of Biodegradable Zn-3Mg Alloy. Advanced Materials Research . 845: 7-11.
Ardhyananta, H., Abdul, F., Hassan, A., Kurniawan, D. (2014) Tensile and Thermal Properties of Bambusa arundinacea and Dendrocalamus asper Culm Fibers. Advanced Materials Research. 845: 237-240.
Sultan, A.Z., Sharif, S., Kurniawan, D. (2014) Examining the Effect of Various Vegetable Oil-Based Cutting Fluids on Surface Integrity in Drilling Steel-A Review. Advanced Materials Research. 845: 809-813.
Yii, S.L.J., Kurniawan, D. (2014) Effect of Rare Earth Addition on Microstructure and Mechanical Properties of Al-Si Alloys: An Overview. Advanced Materials Research. 845: 27-30.
Nur, R., Noordin, M.Y., Izman, S., Kurniawan, D. (2014) Power Demand Calculations in Turning of Aluminum Alloy. Advanced Materials Research. 845: 786-789.
Ngadiman, N.H.A., Noordin, M.Y., Idris, A., Kurniawan, D. (2014) Effect of Electrospinning Parameters Setting towards Fiber Diameter. Advanced Materials Research. 845: 985-988.
Wahab, H.A., Noordin, M.Y., Izman, S., Kamdi, Z., Kurniawan, D. (2014) Composition Modification of Electroplated Nickel Interlayer on Tungsten Carbide Substrate by Thermal Carburizing. Advanced Materials Research. 845: 378-381.
Ndaruhadi, P.Y.M.W., Sharif, S., Kurniawan, D. (2014) Experiment Investigation of Hole Accuracy and Surface Roughness in Femur Bone Drilling Using Different Parameters. Advanced Materials Research. 845: 720-723.
Ngadiman, N. H. A., Yusof, N. M., Kurniawan, D., Idris, A. (2014) Characterisation of Electrospun Magnetic Nanoparticle γ-Fe2O3/PVA nanofibers. In Transactions of the North American Manufacturing Research Institution of SME. 42: 396-400.
Hakimi, I.M., Sharif, S., Kurniawan, D. (2013) Laminate Orientation Effect on Drilling of Carbon Fiber Reinforced Plastic Composites. Applied Mechanics and Materials. 315: 768-772.
Wardoyo, T.T.B., Izman, S., Kurniawan, D. (2013) Effect of Process Parameters on Quality of Cold Spinned Tube Head. Applied Mechanics and Materials. 315: 739-743.
Norafifah, H., Noordin, M.Y., Izman, S., Kurniawan, D. (2013) Acid Pretreatment of WC-Co for Surface Roughening and Cobalt Removal Prior to CVD Diamond Coating. Applied Mechanics and Materials. 315: 592-596.
Kurniawan, D., Jiawkok, N., Noordin, M.Y. (2013) Machining Conditions Effect to Machining Temperature and Forces in Orthogonal Machining of Bone. Advanced Materials Research. 658: 223-226.
Kurniawan, D., Kim, B.S., Lee, H.Y., Lim, J.Y. (2013) Effect of Compatibilizers on Mechanical Properties of Wood/Polylactic Acid Composites. International Symposium on Green Manufacturing and Applications 2013. Jun 25-29. Honolulu: Korean Society for Precision Engineering, C-10-3. [Abstract only]
Nor, F.M., Lee, H.Y., Lim, J.Y., Kurniawan, D., M.N. Tamin (2013) Crack Front Profile of Three Point End Notch Flexure Tested Unidirectional CFRP. 9th International Conference on Fracture & Strength of Solids. Jun 9-13. Jeju: The Far East and Oceanic Fracture Society, PS-307. [Abstract only]
Kurniawan, D., Ha, J.R., Kim, B.S., Lee, H.Y., Lim, J.Y., Song, J.I. (2013) Effect of Compatibilizers on Mechanical Properties of Wood/Polylactic Acid Composites. 9th International Conference on Fracture & Strength of Solids. Jun 9-13. Jeju: The Far East and Oceanic Fracture Society, PS-141. [Abstract only]
Nor, F.M., Lee, H.Y., Lim, J.Y., Kurniawan, D. (2012) Effect of Strain Rate and Temperature on Elastic Properties of PCL/Starch. Proceedings of the 8th Asian-Australasian Conference on Composite Materials. November 6-8. Kuala Lumpur: Asian-Australasian Committee for Composite Materials, O-BIO-311.
Redzuan, N., Kim, B.S., Kurniawan, D. (2012) Silane Treatments on Cellulose Fabric/PLA Composites. Proceedings of the 8th Asian-Australasian Conference on Composite Materials. November 6-8. Kuala Lumpur: Asian-Australasian Committee for Composite Materials, O-BIO-314.
Sultan, A.Z., Sharif, S., Kurniawan, D. (2012) Electrostatic Cooling System as Environmentally Conscious Cooling Technique: A Review on Its Potentials for Machining Processes. Proceedings of the International Conference on Sustainable Energy and Development for Future Generations 2012. July 12. Makassar, Indonesia: Muslim University of Indonesia, 225-236.
Nur, R., Noordin, M.Y., Izman, S., Kurniawan, D. (2012) Calculation of Energy Consumption in machining of Hardened Stainless Steel. Proceedings of the International Conference on Sustainable Energy and Development for Future Generations 2012. July 12. Makassar, Indonesia: Muslim University of Indonesia, 199-207.
Redzuan, N., Kurniawan, D., Kim, B.S. (2012) Mechanical Properties of Cellulose Fabric/Polylactic Acid Composites: Effect of Silane Coupling Agent and Atmospheric Plasma Polymerization. International Conference of Manufacturing Engineering and Engineering Management 2012. July 4-6. London, U.K.: International Association of Engineers. {Abstract only]
Noordin, M.Y., Noor Adila, A.S., Izman, S., Kurniawan, D. (2012) Acid Pretreatment of WC-Co Prior to CVD Diamond Coating. Advanced Materials Research. 576: 626-629. [link]
Ha, J.R., Kurniawan, D., Kim, B.S., Song, J. I. (2011) Mechanical Properties of Plasma Polymerized Cellulose Fabric/Polylactic Acid. Proceedings of the KSCM 2011 Fall Annual Meeting. November 18. Changwon, Korea: Korean Society of Composite Materials and Japan Society of Composite Materials.
Kurniawan, D., Ha, J.R., Kim, B.S., Lee, H.Y., Lim, J.Y. (2011) Effect of Silane and Zein Coupling Agents on Mechanical Properties of Lyocell Fabric/PLA Composites. Proceedings of the 8th Korea-Japan Joint Symposium on Composite Materials. November 17. Changwon, Korea: Korean Society of Composite Materials and Japan Society of Composite Materials.
Kurniawan, D., Ha, J.R., Kim, B.S., Kim, D.Y., Lee, H.Y., Lim, J.Y. (2011) Effect of Maleic Anhydride and Zein Coupling Agents on Physical Properties of Wood/Polylactic Acid Composites. Proceedings of the International Symposium on Green Manufacturing and Applications 2011. October 6-7. Seoul, Korea: Korean Society for Precision Engineering. [Abstract only]
Nor, F.M., Kurniawan, D., Seo, Y.K., Park, J.K., Park, S.A., Kim, W.D., Lee, H.Y., Lim, J.Y. (2011) Fabrication and Physical Properties Of Polycaprolactone/Starch Blends with Corn Based Coupling Agent. Proceedings of the 18th International Conference on Composite Materials. August 21-26. ICC Jeju, Korea: Korean Society of Composite Materials.
Kurniawan, D., Kim, B.S., Lee, H.Y., Lim, J.Y. (2011) Plasma Polymerization of Basalt Fiber/Polylactic Acid Composites: Effects on Mechanical Properties. Proceedings of the 18th International Conference on Composite Materials. August 21-26. ICC Jeju, Korea: Korean Society of Composite Materials.
Kim, B.S., Kurniawan, D., Lee, H.Y., Lim, J.Y. (2011) Towards Improvement on Mechanical Properties of Basalt Fiber/Polylactic Acid Composites. Proceedings of the 18th International Conference on Composite Materials. August 21-26. ICC Jeju, Korea: Korean Society of Composite Materials.
Kurniawan, D., Nor, F.M., Lee H.Y., Lim, J.Y. (2010) Periimplant Bone Biomechanics: Finite Element Analysis for Partial Osseointegration. Proceedings of the KSME 2010 Fall Annual Meeting. November 3-5. ICC Jeju, Korea: Korean Society of Mechanical Engineers, 4122-4125.
Nor, F.M., Kurniawan, D., Lee H.Y., Lim, J.Y. (2010) Finite Element Analysis of Acupuncture Needle Insertion: Skin’s elastic response. Proceedings of the KSME 2010 Fall Annual Meeting. November 3-5. ICC Jeju, Korea: Korean Society of Mechanical Engineers, 4108-4110.
Kurniawan, D., Yu, M.Y., Kim, B.S., Lee, H.Y., Lim, J.Y. (2010) Reprocessing and Its Effects on Mechanical Properties of Wood Fiber/Polypropylene Composites. Proceeding of the Sixth International Workshop on Green Composites. September 8-10. Gumi, Korea: Kumoh National Institute of Technology.
Kurniawan, D., Sharif, S., Hisyam, M.A., Lim, J.Y. (2009) End Milling of Stainless Steel Using Vegetable Oil Cutting Fluid. Proceedings of the KSME 2009 Fall Annual Meeting. November 4-6. Gangwon, Korea: Korean Society of Mechanical Engineers, 1343-1347.
Sharif S., Kurniawan, D., Hisyam, M., Orady, E. (2009) Performance Evaluation of Vegetable Oil as an Alternative Cutting Lubricant When End Milling Stainless Steel Using TiAlN Coated Carbide Tools. Transactions of NAMRI/SME. 37: 9-14.
Noordin M.Y., Effendy, Kurniawan, D. (2008) Tool Wear and Tool Life Performance of TiAlN Coated Carbide Cutting Tools when Turning Hardened Cold Work Tool Steel. Proceedings of International Graduate Conference on Engineering and Science 2008. December 23-24. Johor Bahru, Malaysia: SPS UTM and PGSS UTM, B37 1-7.
Noordin M.Y., Kurniawan, D., Sharif, S., Kadir, M.R.A. (2008) Dry Machining of Hardened Stainless Steel Using Coated Carbide Cutting Tool with Wiper Geometry: Determination of Optimum Cutting Parameters Using Empirical Modeling Approach. Proceedings of the 9th Asia Pacific Industrial Engineering & Management Systems Conference. December 3–5. Nusa Dua, Indonesia: APIEMS, 1291– 1298.
Kadir, M.R.A., Haron, H., Kamsah, N., Kurniawan, D., Nordin, N. (2008) The Effect of Different Types of Plates on the Stability of Condylar Fracture. Proceedings of the International Conference on Biomedical Engineering 2008 (BME Days 2008). November 11 – 12. Surabaya, Indonesia: ITS, PS048 1–5.
Kadir, M.R.A., Kamsah, N., Kurniawan, D., Ying, O.R. (2008) Finite Element Analysis of Mandibular Fractures with Rigid Fixation. Proceedings of the International Conference on Biomedical Engineering 2008 (BME Days 2008). November 11 – 12. Surabaya, Indonesia: ITS, PS032 1–5.
Kamely, M.A., Noordin, M.Y., Venkatesh, V.C., Kurniawan, D. (2008) The Effect of Cutting Speed and Coating Materials on Chip Formation when Hard Turning AISI D2 Cold Work Tool Steel (60 HRC). Proceedings of the Conference on Manufacturing and Electrical Engineering 2008. January 8-9. Johor Bahru, Malaysia: SME-UTM Chapter.
Noordin, M. Y., Kurniawan, D., Sharif, S. (2007) Evaluation on Machined Surface of Hardened Stainless Steel Generated by Hard Turning Using Coated Carbide Tools with Wiper Geometry. Proceedings of the 2007 National Metallurgical Conference. November 26-27. Johor Bahru, Malaysia: FKM UTM and IoMM, A4 1-9.
Rahaman, W.E.W.A., Noordin, M.Y., Kurniawan, D. (2007) Tool Life and Surface Roughness of Ceramic Cutting Tool when Turning AISI D2 Tool Steel. Proceedings of the 2007 National Metallurgical Conference. November 26-27. Johor Bahru, Malaysia: FKM UTM and IoMM, A5 1-5.
Zainal, A.M., Noordin, M.Y., Kurniawan, D., Sharif, S., and Tang, Y. C. (2006) Advances in Machining Hard-to-cut Materials: The Use of Coated Carbide and Ceramic Cutting Tools. Proceedings of the 2006 International Conference on Technology and Operations Management. December 1-2. Bandung, Indonesia: SBM ITB and UUM.
Noordin, M.Y., Tang, Y.C., and Kurniawan, D. (2006) Tool Life Investigation of PVD TiAlN Coated Carbide Insert When Turning Hardened Tool Steel. Proceedings of the 2006 International Conference on Manufacturing Science and Technology. August 28-30. Melaka, Malaysia: GKH Press, 51-54.
Noordin, M.Y., Kurniawan, D., Sharif, S., and Tang, Y.C. (2006) On Hard Turning of Martensitic Stainless Steel Using Geometrically Modified Coated Carbide. Proceedings of the 2006 International Conference on Manufacturing Science and Technology. August 28-30. Melaka, Malaysia: GKH Press, 90-93.
Noordin, M.Y., Kurniawan, D., Sharif, S., and Tang, Y.C. (2006) Performance of Wiper Coated Carbide Tool When Turning Hardened Stainless Steel. Proceedings of the 1st Regional Postgraduate Conference on Engineering and Science. July 26-27. Johor Bahru, Malaysia: SPS UTM and PPI UTM, 381-385.
Kamely, M.A., Noordin, M.Y., Venkatesh, V.C., and Kurniawan, D. (2006) An Experimental Investigation of Coated Ceramic Cutting Tools When Hard Turning Cold Work Tool Steel. Proceedings of the 1st Regional Postgraduate Conference on Engineering and Science. July 26-27. Johor Bahru, Malaysia: SPS UTM and PPI UTM, 325-329.
Noordin, M.Y., Kurniawan, D., and Sharif, S. (2006) Surface Integrity of Martensitic Stainless Steel Machined by Wiper Coated Carbide Tool. Proceedings of the 5th International Materials Technology Conference and Exhibition. July 17-20. Kuala Lumpur, Malaysia: IoMM, OMT08 1-15.
Kamely, M.A., Noordin, M.Y., Venkatesh, V.C., and Kurniawan, D. (2006) Performance of Coated Ceramic Cutting Tool When Machining Hardened Steel. Proceedings of the 5th International Materials Technology Conference and Exhibition. July 17-20. Kuala Lumpur, Malaysia: IoMM, OCM05 1-15.
3 book chapters
Ngadiman, N.H.A., Noordin, M.Y., Idris, A., Kurniawan, D., Fallahiarezoudar, E., Sudin, I. (2017) Developments in Tissue Engineering Scaffolding Using an Electrospinning Process. In Jacobs, T. (Ed.) Electrospinning and Electroplating. New York: Nova Science Publishers, Inc., 87-126. ISBN: 978-1-53612-363-0. [link]
Kurniawan, D. (2008) Tool Life and Surface Integrity When Hard Turning Stainless Steel Using Wiper Coated Carbide Tool. Munich: GRIN Publishing GmbH. ISBN: 978-3-656-19232-9. [link]
Noordin, M.Y., Rahaman, W.E.W.A.., Hendriko, Kurniawan, D. (2008) Tool Life and Surface Roughness when Turning Hardened AISI D2 Tool Steel using Ceramic Cutting Tool With T-Land Cutting Edge. In Hassan, A., Tap, M. M., Kadir, A.Z.A. (Eds.) Advances in Manufacturing and Industrial Engineering 2008. Skudai: Penerbit UTM, 185-202. ISBN: 978-983-52-0549-1. [link]