Dharun Shankar R, D. A. Perumal, Numerical Simulations of Fluid Flow in a Staggered Double Lid-Driven Cavity, 5th International Conference on Advances in Mechanical Engineering (ICAME 2024), SRM Institute of Science and Technology, Kattankulathur Campus, Chennai, March 20-22, 2024.
Sumanth N Hegde, Nihal L Bendre and D. A. Perumal, Numerical simulation of lid-driven cavity flow induced by triangular obstacles, International Conference on Recent Advances in Science and Engineering (RAiSE-2023), Department of Mechanical & Industrial Engineering at MIT Manipal, Karnataka, in association with the School of Engineering and IT at MAHE Dubai, 04-05 October 2023 (Hybrid Mode).
Erin Sam Joe, and D. A. Perumal, Development and validation of a compressible three-phase VOF solver to account for cavitation effects on near-nozzle flows and spray atomization, International Conference on Recent Advances in Fluid Mechanics and Nanoelectronics (ICRAFMN 2023), 12-14 July 2023, MIT Bangalore, Karnataka, India.
Abhijay Mishra, Karunakaran Ealumalai and D. A. Perumal, A CFD STUDY ON THE INFLUENCE OF HOUSING DESIGN ON THE TURBOCHARGER COMPRESSOR PERFORMANCE, 27th National Conference on Internal Combustion Engines and Combustion (NCICEC 2022), November 5-7, 2022, Vellore Institute of Technology, India.
Vedant Umang Patel, Karan Panchal, Shreeranjita Kowshik, Sudhanva Nadigera, D. A. Perumal, Lattice Boltzmann Simulation of flow within Staggered Lid Driven Cavities of Varying Geometry, ME@75: Research Frontiers Conference, Indian Institute of Science Bangalore (IISc), June 29-July 01, 2022.
Erin Sam Joe and D. A. Perumal, Combustion modelling of sequential combustion in steam-methane reformation (SMR) furnace using adiabatic flamelet generated manifold, 1st International Conference in Fluid Thermal and Energy Systems June 9-11, 2022, NIT Calicut, Kerala, India (Virtual mode)
Pratik Bagde, Nithin Nayak, D. A. Perumal, Development of Micromixer for efficient mixing of Blood and Insulin in human arteries, International Conference on Advances in Chemical and Materials Sciences (ACMS-2022), Organized by Indian Institute of Chemical Engineers, April 14-16, 2022 (Virtual mode)
Vedant Umang Patel, Karan Panchal, Shreeranjita Kowshik, Sudhanva Nadigera, D. A. Perumal, Numerical Analysis of 2D incompressible flows in U-shaped cavity using Lattice Boltzmann Method, 4th International Conference on Advances in Mechanical Engineering (ICAME 2022), Organized by SRM Institute of Science and Technology, Chennai, March 24-26, 2022. (Virtual Mode)
Tirthraj Bhatt, D. A. Perumal, A. Sasi, Numerical Investigations of Free and Forced Convection with various features using Mesoscopic Lattice Boltzmann Method, 4th International Conference on Advances in Mechanical Engineering (ICAME 2022), Organized by SRM Institute of Science and Technology, Chennai, March 24-26, 2022. (Virtual Mode)
Erin Sam Joe and D. A. Perumal, Computational Analysis of Harmonically Oscillating Lid-Driven Incompressible Fluid in L-Shaped Cavity using Lattice Boltzmann Method, Fluid Mechanics and Fluid Power (FMFP) 2021, Organized by The National Society for fluid Mechanics and Fluid Power / BITS Pilani, Pilani Campus, Rajasthan, 27th to 29th December 2021. (Virtual Mode)
Mayuresh Damle, D. A. Perumal, Computational study of B-Splines based design parameterization strategy for modification of axial compressor annulus geometry for throughflow analysis, Second Edition of the International Conference on Future Technologies (ICOFT 2021), Organized by Department of Mechanical Engineering, National Institute of Technology Puducherry, Karaikal, 16th to 18th December 2021. (Virtual Mode Presentation)
Sthavishtha B.R, D. A. Perumal, and Ajay Kumar Yadav, Fluid flow in three-dimensional oscillating lid-driven cavities, 8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP 2020), Indian Institute of Technology (IIT) Guwahati, Assam, India, December 9 – 11, 2020. (Virtual Mode Presentation)
Srijit Sen, D. A. Perumal, and Ajay Kumar Yadav, Numerical Study of Mixed Convection in Single and Double Sided Lid Driven Cavity using Lattice Boltzmann Method, International Conference on Computational Sciences – Modelling, Computing and Soft Computing (CSMCS-2020), NIT Calicut, September 10-12, 2020. (Virtual Mode Presentation)
Prakash H. Jadhav, Gnanasekaran N and D. A. Perumal, Entropy generationanalysis in a horizontal pipe filled with high porosity metal foam, Proceedings of theInternational Conference on Numerical Heat Transfer and Fluid Flow (NHTFF-2020)NIT Warangal, India – Jan 17-19, 2020.
Prakash H. Jadhav, Banjara Kotresha, Gnanasekaran N and D. A. Perumal, Forced Convection Analysis in a Horizontal Pipe in the Presence of Aluminium Metal Foam – A Numerical Study, 46th National Conference on Fluid Mechanics and Fluid Power (FMFP-2019), December 09-11, PSG College of Technology, Coimbatore, Tamilnadu, India, 2019.
Santosh C, Veershetty Gumtapure, D A Perumal, PREPARATION OF FUNCTIONALIZEDGRAPHENE-LINEAR LOW-DENSITY POLYETHYLENE COMPOSITES BY MELT MIXING METHOD, International Conference on Design,Materials & Manufacture (IcDeM 2019)December 06-08, NIT Karnataka, Surathkal, Mangalore, India, 2019.
Deepak Kumar, D. A. Perumal, Gnanasekaran N and Harsha Kumar MK, Lattice Boltzmann Method combined with Levenberg-Marquardt algorithm to estimate the unknown heat flux – A new inverse approach, International Mechanical Engineering Congress (IMEC) - 2019, Nov 29- Dec 1, NIT Trichy, Tamilnadu, India.
Tirthraj Bhatt, D. A. Perumal, Application of Lattice Boltzmann Method for fluid flow modelling of FSLDR Domain, Second International Conference on Materials, Manufacturing and Modelling ICMMM-2019, March 29-31, Vellore Institute of Technology, VIT University, Vellore, Tamilnadu, India.
Narendran G., Gnanasekaran N., D. A Perumal, Migration of flow induced hotspot with heat spraeder integrated microchannel subjected to asymmetric heat flux: A multiphysics approach, The 20th EuroSimE conference in Thermal, Mechanical & Multiphysics Simulation and Experiments in Micro/Nano-Electronics and Micro/Nano-systems (EuroSimE 2019), March 24-27 2019, Hannover, Germany.
Narendran G., Gnanasekaran N., D. A Perumal, Hydrodynamic performance of GO nanofluid in heat spreader integrated microchannel, 12th International Conference onThermal Engineering: Theory and Applications (ICTEA 2019), February 23-26, 2019, Gandhinagar, Gujarat, India.
Santosh C, Veershetty Gumtapure, D A Perumal, Effect of Geometry On Heating And Cooling Characteristics For Thermal Energy Storage- A Computational Study, 12th
International Conference onThermal Engineering: Theory and Applications (ICTEA 2019), February 23-26, 2019, Gandhinagar, Gujarat, India.
Prakash H Jadhav, N. Gnanasekaran, D A Perumal, A computational assessment of different materials and variations in thickness ratio of solid blocks in a square cavity - A conjugate heat transfer analysis, National Conference on Computational Modeling of Fluid Dynamics Problems (CMFDP), January 18-20, NIT Warangal, Telangana, India, 2019.
Santosh C, Veershetty Gumtapure, D A Perumal, Preparation and characterization of nanoparticle blended polymers for thermal energy storage applications, Second International Conference on Polymer Composites (ICPC), December 15-16, NIT Karnataka, Surathkal, Mangalore, India, 2018.
Amit Kumar, G. Narendran, N. Gnanasekaran, D A Perumal, A Computational Study on Focal Cerebral Cooling Bio implant to Suppress Unprovoked Seizures, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 10-12, IIT Bombay, Mumbai, India, 2018.
Amit Kumar, G. Narendran and D A Perumal, Numerical Study of TiO2 Nanofluid in Multistage Bifurcated Microchannel subjected to Hotspots, First International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018),Amity University Uttar Pradesh, Noida, October 3-5, 2018.
Santosh C, Veershetty Gumtapure, D A Perumal, Melting and Solidification Characteristics for ThermalEnergy Storage Applications –A computational study, Second International Conference on Recent Trends in Materials Science and Technology 2018 (ICMST 2018), Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram, October 10-13, 2018.
Narendran G., Amit Kumar, Gnanasekaran N., D. A Perumal,, Numerical Simulation Of Microgap Based Bioimplants For Treatment Of Epilepsy, Fifth International Conference on Computational Methods for Thermal Problems, THERMACOMP2018, Indian Institute of Science, Bangalore, INDIA, July 9-11, 2018.
G. Narendran, N. Gnanasekaran, D. A Perumal, Experimental And Numerical Investigation On Conjugate Effects In Deep Parallel Microchannel Using Tio2 Nanofluid For Electronic Cooling, Fifth International Conference on Computational Methods for Thermal Problems, THERMACOMP2018, Indian Institute of Science, Bangalore, INDIA, July 9-11, 2018.
G. Narendran, N. Gnanasekaran, D. A Perumal, Flow induced hotspot migration studies with heat spreader integrated microchannels using reduced graphene oxide nanofluids, The 19th EuroSimE conference in Thermal, Mechanical & Multiphysics Simulation and Experiments in Micro/Nano-Electronics and Micro/Nano-systems (EuroSimE 2018), Toulouse, France, April 16–18, 2018.
Babloo Kumar Lohra and D A Perumal, CFD Simulation of Flow in Lid Driven Cavity with different Obstacles of different shapes, International Conference on Applied Analysis, Mathematical Modeling and Computing Techniques (ICAAMMCT – 2018), March 15 – 17, 2018, Department of Mathematics, The Gandhigram Rural Institute (Deemed to be University), Gandhigram, Tamil Nadu.
Santosh C, D A Perumal, Veershetty Gumtapure, Numerical Studies for Charging and Discharging Characteristics of Composite Phase Change Material in a Deep and Shallow Rectangular Enclosure, International Conference on Advances in Manufacturing, Materials and Energy Engineering, (IConMMEE 2018), Mangalore Institute of Technology & Engineering, Moodbidri, March 02-03, Karnataka.
Amit Kumar, G. Narendran and D A Perumal, Entropy generation study of TiO2 nanofluid in microchannel heat sink for electronic cooling application, International Conference on Advances in Manufacturing, Materials and Energy Engineering, (IConMMEE 2018), Mangalore Institute of Technology & Engineering, Moodbidri, March 02-03, Karnataka.
Balashanker K, Vikas V Shetty and D A Perumal, Lattice Boltzmann Simulation of Double-Sided Deep Cavities at low Reynolds number, Innovative Design, International conference on Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), February 22nd to 24th 2018, Veltech University, Chennai, Tamilnadu.
Shambhu Kumar Tati, D A Perumal and Ajay Kumar Yadav, Computational Study of One- and Two- Dimensional Transient Heat Conduction problems Using Lattice Boltzmann Method, International conference on Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), February 22nd to 24th 2018, Veltech University, Chennai, Tamilnadu.
Isac Rajan, Balashanker K and D A Perumal, Lattice Boltzmann Computation of Creeping Fluid Flow in Roll-Coating Applications, International Conference on Design, Materials & Manufacture - IcDeM 2018, January 29-31, 2018, NATIONAL INSTITUTE OF TECHNOLOGY KARNATAKA, SURATHKAL, India.
Sthavishtha B.R and D. A Perumal, GASEOUS FLOWS IN MICRO-CHANNELS: A NUMERICAL STUDY USING MESOSCOPIC LATTICE BOLTZMANN METHOD, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India.
Isac Rajan, D A Perumal and Ajay Kumar Yadav, LATTICE BOLTZMANN COMPUTATION OF LID-DRIVEN MICROSCALE TRANSPORT, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS Pilani, Hyderabad, India
G. Narendran, N. Gnanasekaran, and D.A.Perumal, NUMERICAL ANALYSIS OF GRAPHENE NANOFLUID IN MICROSCALE HEAT SINK COMBINED WITH HEAT SPREADER – A HOLISTIC APPROACH FOR EFFECTIVE PACKAGING, Sixth Asian Symposium on Computational Heat Transfer and Fluid Flow(ASCHT 2017), December 10-13, Indian Institute of Technology Madras, Chennai, Tamilnadu, 2017.
Santosh, Veershetty G, and D.A.Perumal, Numerical Analysis of Composite Phase Change Material in a Square Enclosure, Sixth International Conference on Advances in Energy Research (ICAER 2017), Indian Institute of Technology Bombay, December 12-14, 2017.
Pawan Karki, Ajay Kumar Yadav and D.A Perumal, Numerical Study of Thermal and Hydraulic Behaviors of Single Phase Natural Circulation Loop using Lattice Boltzmann Method, International Conference on Mathematical Computer Engineering (ICMCE 2017), VIT Chennai, November 3-4 2017, Tamilnadu.
Pawan Karki, Ajay Kumar Yadav and D.A Perumal, Lattice Boltzmann Computation of Two Dimensional Differentailly Heated Cavity Of Incompressible Fluid With Different Aspect Ratios, IEEE International Conference On Intelligent Computing,Instrumentation And Control Technologies (ICICICT 2017), 06-07 July 2017, Vimal Jyothi Engg College, Kannur, Kerala.
G. Narendran, N Gnanasekaran, D A Perumal, Computational Study of mixed convection in a lid-driven cavity with square block subjected to constant heat flux, 6th International Engineering Symposium (IES 2017), 01-03, March 2017, Kumamoto University, Japan.
Sthavishtha B.R and D.A. Perumal, Steady flows in L-Shaped Cavities: A Numerical Study using Mesoscale Lattice Boltzmann Method, International conference on Advances in Scientific Computing (ICASC 2016), 28-30 November 2016, Indian Institute of Technology Madras, Tamilnadu.
D.A Perumal, LBM Simulation and analytical validation of incompressible Couette and Poiseuille flows, International Conference on Future Technologies in Engineering (ICFTE 2016), 24-26 October 2016, College of Engineeing Perumon, Perinod, Kerala.
Sthavishtha B.R and D.A. Perumal, COMPUTATION OF INCOMPRESSIBLE FLUID FLOWS IN A SINGLE-SIDED CROSS-SHAPED LID-DRIVEN CAVITY USING LATTICE BOLTZMANN METHOD, IEEE International Conference on Emerging Technological Trends (ICETT 2016), 21-22 October 2016, Baselios Mathews II College of Engineering, Kollam, Kerala. http://ieeexplore.ieee.org/document/7873734/ DOI: 10.1109/ICETT.2016.7873734
D.A. Perumal, An Efficient Transient Multi-Relaxation-Time Lattice Boltzmann method for incompressible fluid flows, National Conference on Frontiers in Applied Sciences and Computer Technology (FACT’16), March 18-19, NIT, TRICHY, INDIA, 2016.
D.A. Perumal, Simulation of two-sided deep cavity flows by lattice Boltzmann multi-relaxation-time model, National Conference on Advances in Mathematics and its applications to Science and Engineering (AMASE 2016), January 22, University College of Engg, Pattukottai, Tamilnadu, India, 2016.
D.A. Perumal, M.P.Mydeen, Sabarish C.S., M.Selvam, B.Duraisamy, Analysis of flow behaviour in a Jet Ejectors using CFD Tools, International Conference on Advances in Chemical Engineering (ICACE 2015), December 20 - 22, NIT Karnataka, Surathkal, INDIA, 2015.
D.A. Perumal, Numerical Simulation of Multi-Relaxation-Time Lattice Boltzmann method in Rolling Operation of Rectangular Bar, International Conference on Direct Digital Manufacturing and Polymers (ICDDMAP-2015), October 28-31, Karnatak University, Dharwad-580 003, India, 2015.
K. Jerine Selvamani, D.A. Perumal, Design and Analysis of Heat Transfer Characteristics in a Car Radiator Filled with Grapheme-Ethylene Glycol, National Conference on Recent Advancements in Mechanical Engineering (NCRAME'15), April 10, V V College of Engg, Tamilnadu, India, 2015.
D.A. Perumal, Simulation of Double-Sided Lid-Driven Cavity Flows by LBM-MRT Model, National Conference on Frontiers in APPLIED SCIENCES AND COMPUTER TECHNOLOGY (FACT’15), March 06-07, NIT, TRICHY, INDIA, 2015.
D.A. Perumal, G.V.S. Kumar, A.K. Dass, Lattice Boltzmann Computation of Flow Around Two Circular Cylinders in Tandem, Fifth International Congress on Computational Mechanics and Simulation (ICCMS 2014), December 10-13, CSIR Chennai, INDIA, 2014. (ISBN : 978-981-09-1139-3), doi:10.3850/978-09-1139-3_149
D.A. Perumal, A. K. Dass, Computation of Lattice Kinetic Scheme for Double-sided Parallel and Antiparallel Wall Motion, INTERNATIONAL MECHANICAL ENGINEERING CONGRESS - 2014 (IMEC 2014), JUNE 13-15, NIT, TRICHY, INDIA, 2014.
D.A.Perumal, Computation of Multi-Relaxation-Time Model for Cavity Flows Driven by Parallel and Antiparallel Wall Motion, National Conference on Innovations in Engineering Design (NCIED'14), BIT Campus, Anna University, April 29-30, Tamilnadu, 2014.
D.A.Perumal, L.Agarwal, T.K.Raj, A.Harshan, N. Gopal, Examination of the Lattice Boltzmann Method in simulation of manufacturing, International Conference on Trends in Product cycle, Modeling, Simulation and Synthesis, (PLMSS 2014), Jan 6-8, VIT University, Vellore, Tamilnadu, Jan 2014.
D.A. Perumal, A. K. Dass, Multiple fluid flow solutions in a rectangular lid-driven cavity flows by Lattice Boltzmann Method, International Conference on Computer Aided Engineering (CAE-2013), Indian Institute of Technology Madras, India Dec 19-21, 2013. Page No: 390-394
A.Aziz, D.A. Perumal, Study of flow over Iced aerofoil using Computational fluid dynamics, National Conference on Frontiers in Aeronautical, Aerospace and Automotive Engineering,March 01-02, Noorul Islam University, Kanyakumari, India, 2013.
T.Pradeesh, D.A. Perumal, Experimental and computational studies on wind turbine, National Conference on Frontiers in Aeronautical, Aerospace and Automotive Engineering,March 01-02, Noorul Islam University, Kanyakumari, India, 2013.
M.P.Mydeen, Sabarish C.S., M.Selvam, B.Duraisamy, D.A. Perumal, Effect of cavitation in Diesel fuel injector Nozzle, National Conference on Frontiers in Aeronautical, Aerospace and Automotive Engineering,March 01-02, Noorul Islam University, Kanyakumari, India, 2013.
D.A. Perumal, I.M.Gowhar, S.A.Ananthapuri, V.Jayakrishnan, A new paradigm to solve heat transfer problems using mesoscopic LBM approach, National Conference on Frontiers in Aeronautical, Aerospace and Automotive Engineering,March 01-02, Noorul Islam University, Kanyakumari, India, 2013.
D.A. Perumal, A. K. Dass, Numerical Simulation of Three Dimensional Two-Sided Lid-Driven Cubical Cavity Flow using Lattice Boltzmann Method, International Conference on Modelling, Optimisation and Computing (ICMOC 2012), April 10-11, Noorul Islam University, Kanyakumari, India, April 2012.
D.A. Perumal, L.Agarwal, Numerical Simulation of Cavity flows driven by Parallel and Antiparallel motion of two facing walls using Lattice Boltzmann Method, Second International conference on Advances in Mechanical, Manufacturing and Building Sciences, (ICAMB 2012), Jan 9-11, VIT University, Vellore, Tamilnadu, Jan 2012. Page No: 848-854
D.A. Perumal, G.V.S. Kumar, A.K. Dass, Lattice Boltzmann Numerical Simulation of Fluid flow of two tandem circular cylinders, Blubof2011, IUTAM Symposium on Bluff Body Flows, Indian Institute of Technology Kanpur, Dec 12-16, 2011.
Ambesh M Shetye, Saurav Acharjee, D A. Perumal, Thundil Karupparaj. R, Numerical study of high lift aerofoil using Computational Fluid Dynamics, Second International Conference on Science and Technology (SET-11), Vellore Institute of Technology, VIT University, November, 2011.
D.A. Perumal, Ranjan Das, Lattice Boltzmann Simulation of Two-Dimensional Incompressible Driven Cavity Flow at High Reynolds Numbers, Second International conference on Simulation Modeling and Analysis (COSMA 2011), Amrita University, Tamilnadu, December 2011.
D.A. Perumal, A.K. Dass, Lattice Boltzmann simulation of two and three-dimensional Incompressible thermal flows, International Conference On Thermal Energy and Environment (INCOTEE 2011), Kalasalingam University, Tamilnadu, March 24-26, 2011, India.
G.V.S. Kumar, D.A. Perumal, A.K. Dass, Numerical Simulation Of Viscous Flow Over A Circular Cylinder Using Lattice Boltzmann Method, International Conference on Fluid Mechanics and Fluid Power (37th FMFP-10), IIT Madras, Tamilnadu, India, Dec 16-18, 2010.
D. A. Perumal,S. Srinivasan, S. Vamsi Krishna, Ashok Korake, R. Thundil Karuppa Raj, Numerical Study of Conjugate Heat Transfer of an Automotive Radiator using CFD, First International Conference on Science and Technology (SET-10), VIT University, Vellore, Nov 11-13, 2010.
T.Santra, R.Chauhan, N.Tank, D.A. Perumal, Study of CFD Modelling of the combustion chamber with bowl piston geometry, First International Conference on Science and Technology (SET-10), VIT University, Nov 11-13, 2010.
D.A. Perumal, A. K. Dass, Computation of flows in two-sided cubic and prism cavities using lattice Boltzmann method, Third International Congress of Environmental Research (ICER 10), University of Mauritius, Mauritius, Sept. 16-18, 2010.
D. A. Perumal, G.V.S. Kumar and A.K. Dass, Application of Lattice Boltzmann method to Micro-Cavities, International Conference on Advanced Nanomaterials and Nanotechnology (ICANN-2009),Indian Institute of Technology Guwahati Guwahati, Assam, India, Dec 9-11, 2009.
D.A. Perumal and A.K. Dass, Multiplicity of Steady Solutions in Two-Dimensional Lid-Driven Cavity Flows by the Lattice Boltzmann Method, Sixth Int. Conf. for Mesoscopic Methods in Engg and Science (ICMMES-09), Guangzhou, China, July 13-17, 2009.
D.A. Perumal, A.K. Dass, Simulation of Incompressible thermal flows by Lattice Boltzmann Method, Computer Aided Modeling and Simulation in Computational Mechanics (CAMSCM-09), NERIST, Arunachalpradesh, India, March 13-14, 2009.
D.A. Perumal, Vamsi Krishna, G.Sarvesh, Anoop K. Dass, Numerical Simulation of Gaseous Microflows by LBM, IJJCE-ME, The Association of Computer, Electronics and Electrical Engineers (IJJCE-09), March 2009.
A.K. Dass, D.A. Perumal, Investigation of Fluid-flow and Heat Transfer Problems through Lattice Boltzmann Method (LBM), National Conference on Recent Advances in Mechanical Engineering (NCRAME-2008), NIT Silchar, Assam, Dec 20-21, 2008, India. (Keynote Paper)
D.A. Perumal, Anoop K. Dass, Simulation of flow in two-sided lid-driven square cavities by the LBM, Seventh International Conference on Advances in Fluid Mechanics (AFM VII), 45-54, United Kingdom, May 2008.
D.A. Perumal, A.K. Dass, Lattice Boltzmann simulation of two and three dimensional flow in a lid-driven cavity, IISc Centenary Conference, International Conference on Advances in Mechanical Engineering (IC-ICAME), Bangalore, India, July 21-24, 2008.
D.A. Perumal, A.K. Dass, Incompressible Viscous Flow Simulation in the Lid-Driven Cavity by LBM, Second Int. Congress on Computational Mechanics and Simulation (ICCMS-06), Indian Institute of Technology Guwahati, Assam, Dec 2006, India.
D.A. Perumal, N.Dhandpani, S.Nadarajan, S.M.Sivagami, An Innovative Approach to Predict the Submerged Arc Welding parameters (Neural Network), Conference on Recent Trends in Science and Technology (NCRTST-05), Chennai, Tamilnadu, July 2005.
D.A. Perumal, N.Dhandapani, S.Nadarajan, K.Saravana Kumar, Simulation of Direct Injection Four Stroke Compression Ignition Engine, Conference on Globally competitive Eco friendly Technologies in Mechanical and Mechatronics Engineering (GETME-05), KEC, Erode, Tamilnadu, July 2005, India.
D.A. Perumal, N.Dhandapani, S.Nadarajan, K.Saravana Kumar, Simulation of Two Stroke Compression Ignition Engine, Conference on Development-cum-Environment Friendly Future Industrial Fuels (DEFIF-05), KCT, Coimbatore, Tamilnadu, May 2005, India.
M. Eswaran, D.A. Perumal, C. Selvaraj, Optimization of Welding Parameters using genetic Algorithm, NCCICC-05, PET Engg College, Tamilnadu, India.
Workshops/Short Term Courses Attended
Workshop on MATLAB and its applications, Organized by Mathematics Dept, VV College of Engg, Tisaiyanvilai, October 30-31, 2014.
Short Term Course on Computational Fluid Dynamics for Chemical and Petroleum Engineers, Organized by Chemical Dept, IIT Guwahati, June 08-12, 2009.
Workshop on Microfluidics and Fabrionics (MicroFabrication), Organized by Indo US S&T Forum at IIT Kharagpur, Jan 9-11, 2009.
Workshop on Management of Renewable Energy sources for Sustainable Development, Feb 12, Anna University GCT Campus, 2005.
Workshop on Modeling and Optimization of Mechanical Systems, Ramakrishna Engineering College, Coimbatore, Aug 14, 2004.
Two days Workshop on Environmental Management in Construction Industries, Feb 27-28, Anna University GCT Campus, 2004.