Imaging of relief in pure form
("digital whitening")
Appearance of any object depends both on its relief and reflectance. For some objects, only the relief is of interest.
This is especially common in paleontology. Several solutions are used there:
whitening: coating with some white fine-grained substance (NH4Cl, MgO etc.),
virtual, or digital whitening without any altering of the object:
creating of 3D model (by photogrammetry or 3D scanning) and its rendering with ignoring of real reflectance and color of the object;
Reflectance Transformation Imaging (RTI), including its common implementation: Polynomial Texture Mapping (PTM). The object is photographed from a single direction, but with different directions of illumination. Then the dependence of brightness on the direction of illumination is determined for each pixel. This enables to create a model which shows the object under any asked illumination, including those which are impossible in reality. Again, the real reflectance can be ignored.
Pure relief can also be visualized in a simpler way. The brightness of each pixel is proportional to the reflectivity of the object's surface. In an image taken under directional light, brightness also depends on the surface relief, whereas in an image taken under diffuse light, it does not (at least in the first approximation). If the first image is divided by the second, the reflectivity cancels out, leaving the contribution of relief in its pure form.
This technique requires only two images (normally raw files, because their brightness values after subtraction of dark value are proportional to real brightness). The files can be processed by a simple script with several accessory functions which can be freely obtained from the author.
Examples of results of this technique: