FINAL PROGRAMME

IN ASSOCIATION WITH:

ACADEMY OF TECHNICAL SCIENCES OF ROMANIA

ROMANIAN SOCIETY OF THEORETICAL AND APPLIED MECHANICS

RESEARCH INSTITUTE FOR CONSTRUCTION EQUIPMENT AND TECHNOLOGY ICECON S.A.

The 7th International Conference on

Computational Mechanics and Virtual Engineering

COMEC 2017

Brasov, ROMANIA, 16-17 November 2017

FINAL PROGRAMME

Brașov, ROMANIA, 16-17 November 2017

 SCIENTIFIC AND REVIEWERS COMMITTEE

Chairman: 

Gyorgy SZEIDL, Prof.dr.hab.Eng., University of Miskolc,Hungary;

Co-chairman:

Carmine PAPPALETTERE, Prof.Dr.Eng., Politecnico di Bari, Italy;

Polidor BRATU, Prof.Dr.Eng., ICECON Bucureşti;

Committee:

Niitsu YASHUSI, Ph.D.Eng. Tokyo Denky University, Japan;

Cornel STAN, Prof. Dr.Eng. Habil. DHC, Zwickau, Germany;

Károly JÁRMAI, Prof.dr.hab.Eng., University of Miskolc,Hungary;

Manfred BAU, Dipl.-Ing.Dr.,Intales Gmbh, Germany;

Damien SOULAT, University d'Orleance, France;

Michael DEDIU, Ph.D., DERC Inc., USA;

Caterina CASAVOLA, Dr. Eng., Politecnico di Bari, Italy;

Mostafa KATOUZIAN, Ph.D.Eng., Germany;

Mircea RADES, Prof.Dr.Eng., Member of the Romanian Technical Sciences Academy;

Nicolae PANDREA, Prof.Dr.Eng., University of Piteşti, Member of the Romanian Technical Sciences Academy;

Costică ATANASIU, Prof.Dr.Eng. University Politehnica of Bucharest;

Tiberiu MĂNESCU, Prof.Dr.Eng. University of Reşiţa, member of the Romanian Tech.Sci. Academy;

Nicolae ENESCU, Prof.Dr.Eng., Politehnica University of Bucharest;

Vasile NĂSTĂSESCU, Prof.Dr.Eng., Technical Armee Academy, Bucharest.

Iuliu NEGREAN, Prof.Dr.Eng., Technical University of Cluj, Romania;

Mircea MODIGA, Prof.dr.Eng., University of Galaţi;

Tiberiu BABEU, Prof.Dr.Eng. member of the Romanian Technical Sciences Academy;

Stanislav HOLÝ, PhD, Prof. Techn. Univ. In Prague, Czech Republik;

Milan RŮŽIČKA, PhD., Prof. Techn. Univ. In Prague, Czech Republik;

Eva KORMANIKOVÁ, PhD., Prof. Techn. Univ. Košice, Slovakia;

Luděk HYNČÍK, PhD.Eng., University of West Bohemia, Plzeň, Czech Republic;

Nicolae ILIESCU, Prof.Dr.Eng., Bucuresti;

Nicolae POSEA, Prof.Dr.Eng.-UPG Ploiesti;

Dan CONSTANTINESCU, Prof.Dr.Eng. Politehnica University of Bucharest;

Dinu TARAZA, Prof.Dr. Eng., Waine State University, SUA;

Mircea LUPU, Math.dr.ing., University TRANSILVANIA;

Catalin Iulian PRUNCU, M.Sc., Eng., Politecnico di Bari;

Arina MODREA, Prof.Dr.Eng., Targu Mures, Romania;

Nicolae HERISANU, prof.dr.ing. Politehnica University of Timişoara;

Veturia CHIROIU, dr.,Academy Institute of Mechanics of Solid, Bucuresti;

Marius CRACIUN, Dr., Ovidius University - Constanta;

Simona LACHE, Dr., TRANSILVANIA University - Brasov;

ORGANIZER:

 Sorin VLASE, Prof.Dr. Eng. Math. Head of Department of Mechanics, Transilvania University of Braşov;

ORGANIZING COMMITTEE

Ioan Calin ROȘCA, Prof. Dr. Eng., Dean of Faculty of Mechanical Engineering;

Venetia SANDU, Prof.Dr.Eng.;

Ioan SZAVA, Prof.Dr.Eng.;

Dumitru NICOARĂ, Prof.Dr. Math.;

Cornelia DOBRESCU, Urban INCERC București;

Dana LUCA MOTOC, Prof.Dr.Eng.;

Mihai ULEA, Assoc.Prof.Dr.Eng.;

Horațiu TEODORESCU - DRĂGHICESCU, Prof.Dr.Eng.;

Luminița Maria SCUTARU, Prof.Dr.Eng;

Mircea MIHALCICA, Lect.Dr.Eng;

Mihaela Violeta MUNTEANU, Assist.Prof.Eng.;

Maria Violeta GUIMAN, Assist.Prof.Eng.;

SECRETARY:

Bianca CAMPEAN, M.Sc.Eng.;

e-mail: info-dimec@unitbv.ro; d-mec@unitbv.ro

Thursday, November 16th

9.15 – 9.45

Participants welcoming and registration

9.45 – 10.00

Festive opening, Assembly Hall, U I.6

10.00- 11.00

Invited Lectures, Assembly Hall, U I.6

CHAIRMAN: Carmine Pappalettere

                         Polidor Bratu

C. Barile, C. Casavola, Carmine Pappalettere

ACOUSTIC EMISSION ANALYSIS ON CFRP LAMINATES SUBJECTED TO OPEN HOLE TESTING

Károly Jármai, Z. Virág

INNOVATIVE DESIGN OF STIFFENED PLATES AND COLUMNS, AN OVERVIEW

Polidor Bratu

THE SPECIFICITY OF THE EXCITATION SIGNALS FOR THE DYNAMIC TEST OF ANTISEISMIC DEVICES

Horațiu Teodorescu-Drăghicescu, S. Neyrinck

TESTS ON LAYERED DOUBLE-LAP COMPOSITE T-JOINTS

11.00 – 11.15

Coffee break

 11.15 – 13.45

Keynote speakers

SECTION A

Assembly Hall, U I.6

CHAIRMAN: Silviu Năstac

                   Mariana Domnica Stanciu

SECTION B

Assembly Hall, U I.7

CHAIRMAN: György Szeidl

 Camelia Cerbu

14.00 – 15.00

WORKSHOP

SOLUTIONS FOR THE ALIGNMENT OF THE INTERACTION CHAMBER FOR THE GAMMA BEAM

15.00 – 15.45

Lunch

16.00 – 18.00

Technical session

SECTION A

Assembly Hall, U I.6

CHAIRMAN: Mariana Arghir

SECTION B

Assembly Hall, U I.7

CHAIRMAN: Constantin Popescu

SECTION C

Industrial Applications and Applications in Agricultural Machinery

CHAIRMAN: Gheorghe Brătucu

      C. M. Canja

19.00 – Gala Dinner

SECTION POSTER/

PAPERS IN CONFERENCE PROCEEDINGS

Friday, November 17th

10.00– 20.00

Social program