Educations

• Ph.D. ,Computer Science and Information Engineering, National Chung Cheng University, 2005/09~2011/01

• Mater, Computer Science and Information Engineering, National Chung Cheng University, 2004/09~2005/06. (Direct doctorate after 1 year)

• B.S., Information and Computer Education, National Taitung University,  2000/09~2004/06.

Experiences

• Associate Professor, National Changhua University of Education, Taiwan. 2024/8 ~ Present.

• Professor, National Taitung University, Taiwan. 2021/8 ~ 2024/7.

• Associate Professor, National Taitung University, Taiwan. 2016/8 ~ 2021/7.

• Assistant Professor, National Taitung University, Taiwan. 2012/2 ~ 2016/7.

• Assistant Researcher, Chung-Shan Institute of Science and Technology, Taiwan. 2011/8 ~ 2012/2.

• Postdoctoral Researcher, Intel-NTU Connected Context Computing Center, National Taiwan University, Taiwan. 2011/7

Publications

International Journal Papers

1. C.-H. Huang*, Y.-C. Chen, C.-Y. Hsu, J.-Y. Yang, and C.-H. Chang, "FPGA-based UAV and UGV for Search and Rescue Applications: A Case Study," Computers and Electrical Engineering,  vol. 119, pp. 109491, October 2024.

2. C.-H. Huang*, W.-T. Chen, Y.-C. Chang and K.-T. Wu, "An Edge and Trustworthy AI UAV System with Self-Adaptivity and Hyperspectral Imaging for Air Quality Monitoring," IEEE Internet of Things Journal, vol. 11, no. 20, pp. 32572-32584, October 2024.

3. C.-H. Huang*, B.-W. Chen, Y.-J. Lin and J.-X. Zheng, "Smart Crop Growth Monitoring based on System Adaptivity and Edge AI," IEEE Access, vol. 10, pp. 64114-64125, June 2022. doi: 10.1109/ACCESS.2022.3183277 (SCI)

4. C.-H. Huang*, "An FPGA-based Hardware/Software Design using Binarized Neural Networks for Agricultural Applications: A Case Study," IEEE Access, vol. 9, pp. 26523-26531, February 2021. (SCI)

5. C.-H. Huang*, P.-J. Chen, Y.-J. Lin, B.-W. Chen and J.-X. Zheng, "A Robot-based Intelligent Management Design for Agricultural Cyber-Physical Systems," Computers and Electronics in Agriculture, Vol. 181, February 2021. (SCI) 

6. C.-H. Huang*, "HDA: Hierarchical and Dependency-Aware Task Mapping for Network-on-Chip based Embedded Systems," Journal of Systems Architecture (JSA), Vol.108, September 2020.  (SCI)

7. C.-H. Huang*, H.-Y. Chen, Y.-Y. Tzeng, and P.-Y. Li, "Adaptive and Service-oriented Embedded System for Information Security Applications," Computers and Electrical Engineering, Vol. 73, pp. 145-154, January 2019. (SCI)

8. C.-H. Huang*, "A Cryptographic and Embedded System Design with Hardware Virtualization and Self-Adaptation," International Journal of Electrical Engineering (IJEE), Vol. 25, No.5, pp. 183-192, October 2018. (EI)

9. C.-H. Huang*, C.-Y. Wang, and P.-A. Hsiung, "Elastic Superposition Task Mapping for NoC-based Reconfigurable Systems," Microprocessors and Microsystems, Vol. 51, pp. 297-312, June 2017. (SCI)

10. C.-H. Huang*, M.-R. Chen, and Y.-S. Wu, "Elastic and Dependency-Aware Task Mapping for Reconfigurable NoC-based Systems," International Journal of Electrical Engineering (IJEE), Vol. 23, No.2, pp. 63-72, April 2016. (EI)

11. C.-H. Huang*, "A Reconfigurable Point Target Detection System Based on Morphological Clutter Elimination," Journal of Systems Architecture (JSA), Vol. 60, Issue 8, pp. 644-654, September 2014. (SCI)

12. C.-H. Huang* and P.-A. Hsiung, "Virtualizable Hardware/Software Design Infrastructure for Dynamically Partially Reconfigurable Systems," ACM Transactions on Reconfigurable Technology and Systems (TRETS), Vol. 6, No. 2, Article 11, July 2013.(SCI)

13. J.-S. Shen, P.-A. Hsiung*, and C.-H. Huang, "Learning-based Adaptation to Applications and Environments in a Reconfigurable Network-on-Chip for Reducing Crosstalk and Dynamic Power Consumption," Computers and Electrical Engineering, Vol.39, Issue 2, pp. 453-464, February 2013. (SCI)

14. C.-H. Huang and P.-A. Hsiung*, "Model-Based Verification and Estimation Framework for Dynamically Partially Reconfigurable Systems," IEEE Transactions on Industrial Informatics(TII), Vol. 7, No. 2, pp. 287-301, May 2011. (SCI)

15. P.-A. Hsiung*, C.-H. Huang, J.-S. Shen, and C.-C. Chiang, "Scheduling and Placement of Hardware/Software Real-Time Relocatable Tasks in Dynamically Partially Reconfigurable Systems," ACM Transactions on Reconfigurable Technology and Systems (TRETS), Vol. 4, No. 1, Article 9, December 2010. (SCI)

16. C.-H. Huang, P.-A. Hsiung*, and J.-S. Shen, "Model-Based Platform-Specific Co-Design Methodology for Dynamically Partially Reconfigurable Systems with Hardware Virtualization and Preemption," Journal of Systems Architecture (JSA), Vol. 56, No. 11, pp. 545-560, November 2010. (SCI)

17. C.-H. Huang, P.-A. Hsiung*, and J.-S. Shen, "UML-Based Hardware/Software Co-Design Platform for Dynamically Partially Reconfigurable Network Security Systems," Journal of Systems Architecture (JSA), Vol. 56, No. 2-3, pp. 88-102, February 2010. (SCI)

18. C.-H. Huang and P.-A. Hsiung*, "Hardware Resource Virtualization for Dynamically Partially Reconfigurable Systems," IEEE Embedded Systems Letters (ESL), Vol. 1, Issue 1, pp. 19-23, May 2009. (SCI)

19. P.-A. Hsiung*, S.-W. Lin, Y.-R. Chen, C.-H. Huang, C. Shih, and W.C. Chu, "Modeling and Verification of Real-Time Embedded Systems with Urgency," Journal of Systems and Software(JSS), Vol. 82, No. 10, pp. 1627-1641, October 2009. (SCI)

20. P.-A. Hsiung*, C.-H. Huang, and Y.-H. Chen, "Hardware Task Scheduling and Placement in Operating Systems for Dynamically Reconfigurable SoC," Journal of Embedded Computing (JEC), Vol. 3, No. 1, IOS Press, The Netherlands, 2009

21. C.-H. Huang and P.-A. Hsiung*, "Software-Controlled Dynamically Swappable Hardware Design in Partially Reconfigurable Systems," EURASIP Journal on Embedded Systems, vol. 2008, Article ID 231940, 11 pages, 2008. (EI)

22. C.-H. Huang, S.-S. Chang, and P.-A. Hsiung*, "Generic Wrapper Design for Dynamic Swappable Hardware IP in Partially Reconfigurable Systems," International Journal of Electrical Engineering (IJEE), Vol. 14, No. 3, pp. 229-238, June 2007. (EI)

International Conference Papers

1. C.-H. Huang*, Y.-C. Lin, S.-T. Huang, J.-L. Li, and T.-J. Li, "An Edge AI-Enabled UAV System based on FPGA for Water Quality Monitoring with Hyperspectral Imaging," Proceedings of the 51st Annual Conference of the IEEE Industrial Electronics Society (IECON),  October 2025. (Accepted for publication)

2. C.-H. Huang*, Z.-R. Chen and H.-S. Hsu, "An Edge AI and Adaptive Embedded System Design for Agricultural Robotics Applications," Proceedings of the 30th Asia and South Pacific Design Automation Conference (ASP-DAC), pp. 607-613, January 2025.

3. C.-H. Huang*, S.-W. Tang and P.-A. Hsiung, "ACNNE: An Adaptive Convolution Engine for CNNs Acceleration Exploiting Partial Reconfiguration on FPGAs," Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), pp. 1-5, May 2024. doi: 10.1109/ISCAS58744.2024.10558457

4. W.-T. Chen and C.-H. Huang*, "Area-Adaptive Air Quality Monitoring based on FPGA with Edge AI and Hyperspectral Imaging," Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society (IECON), pp. 1-8, October 2023.  doi: 10.1109/IECON51785.2023.10312273

5. C.-H. Huang*, W.-T. Chen, Y.-C. Chang, K.-T. Wu and R.-H. Wang, "ETAUS: An Edge and Trustworthy AI UAV System with Self-Adaptivity for Air Quality Monitoring," Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 6253-6260, October 2023. doi: 10.1109/IROS55552.2023.10342087

6. C.-H. Huang and M.-C. Li, "Project-oriented and Maker-based Teaching Approach: A Case Study of “Microprocessor Systems” Course," Proceedings of Post Pandemic Era: International Conference on Higher Education, Innovative Teaching and Demonstration, May 2022.

7. C.-H. Huang, S.-Y. Yang, W.-T. Huang and P.-R. Wu, "An Edge AI based Robot System for Search and Rescue Applications," Proceedings of IEEE International Conference on Omni-layer Intelligent systems (COINS), August 2021.

8. C.-H. Huang and M.-C. Li, "Enhancing Students' Self-Learning by using Problem and Project based Learning: A Case Study of "Dynamically Reconfigurable SoC Development" Course," Proceedings of International Conference on Higher Education, Innovative Teaching and Demonstration, May 2021.

9. C.-H. Huang, P.-J. Chen, H.-T. Tseng, Z.-M. Zhang, H.-L. Hong, and Y.-Z. Tu, "Design of an Intelligent Robotic Vehicle for Agricultural Cyber Physical Systems, " Proceedings of IEEE International Conference on Consumer Electronics (ICCE), pp. 1-2, January 2020.

10. C.-H. Huang, C.-Y. Chen, and H.-Y. Huang, "Hierarchical and Dependency-Aware Task Mapping for NoC-based Systems," Proceedings of 11th International Workshop on Network on Chip Architectures, pp. 1-6, October 2018.

11. C.-H. Huang, K.-W. Tseng, and P.-A. Hsiung, "Service-oriented Architecture Design for Virtualization in Network-on-Chip," Proceedings of International Computer Symposium (ICS), pp. 108-113, December 2016.

12. C.-H. Huang, H.-Y. Chen, T.-F. Huang, Y.-Y. Tzeng, P.-Y Li, and P.-S. Wu, "A Self-Adaptive System for Vehicle Information Security Applications," Proceedings of 13th IEEE/IFIP International Conference on Embedded and Ubiquitous Computing (EUC), pp. 188-192, October 2015.

13. C.-H. Huang, K.-W. Tseng, C.-C. Lin, F.-Y. Lin and P.-A. Hsiung, "Virtualization Architecture for NoC-based Reconfigurable Systems," Proceedings of Second International Workshop on FPGAs for Software Programmers (FSP), pp. 73-74, September 2015.

14. C.-H. Huang, H.-Y. Chen, T.-F. Huang, P.-W. Chen, and Y.-Y. Tzeng, "A Vehicle Information Security System with Self-Adaptation," Proceedings of the IEEE International Conference on Consumer Electronics–Taiwan (ICCE-TW), pp. 276-277, June 2015.

15. C.-H. Huang, "An Adaptive Cryptographic and Embedded System Design with Hardware Virtualization," Proceedings of the International Conference on Embedded Systems and Applications (ESA), pp. 97-103, July 2014.

16. C.-H. Huang, "An FPGA-Based Point Target Detection System Using Morphological Clutter Elimination," Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS), pp. 2436-2439, May 2013.

17. P.-A. Hsiung and C.-H. Huang, "SAHA: A Self-Adaptive Hardware/Software System Architecture for Ubiquitous Computing Applications," Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms (ERSA), pp. 263-272, July 2011. (Invited Talk)

18. Y.-R. Chen, J.-L. Yao, C.-S. Lin, S.-W. Lin, C.-H. Huang, Y.-P. Hu, P.-A. Hsiung, S.-J. Chen, and I-H. Chou, "SAT-based Verification of Data-Independent Access Control Security Systems," Proceedings of the International Conference on Security and Management (SAM), Vol. II, pp. 126-131, July 2011.

19. C.-H. Huang, J.-S. Shen, and P.-A. Hsiung, "A Self-Adaptive Hardware/Software System Architecture for Ubiquitous Computing Applications," Proceedings of the 7th International Conference on Ubiquitous Intelligence and Computing (UIC, Xi'an, China), LNCS Vol. 6406, pp. 382-396, Springer-Verlag, October 2010.

20. J.-S. Shen, C.-H. Huang, and P.-A. Hsiung, “Learning-based Adaptation to Applications and Environments in a Reconfigurable Network-on-Chip,” Proceedings ofDesign, Automation & Test in Europe Conference & Exhibition (DATE, Dresden, Germany), pp. 381-386, March 2010.

21. J.-S. Shen, C.-H. Huang, and P.-A. Hsiung, "PRESSNoC: Power-Aware and Reliable Encoding Schemes Supported Reconfigurable Network-on-Chip Architecture," Proceedings of the 4th International Conference on Embedded and Multimedia Computing (EM-Com, Jeju, Korea), December 2009. (Best Paper Award)

22. C.-H. Huang and P.-A. Hsiung, "On the Use of a UML-Based HW/SW Co-Design Platform for Reconfigurable Cryptographic Systems," Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS, Taipei, Taiwan), pp. 2221-2224, IEEE Press, May 2009.

23. C.-H. Huang and P.-A. Hsiung, "UML-Based Hardware/Software Co-Design for Partially Reconfigurable Network Security Systems," Proceedings of the 13th IEEE Asia-Pacific Computer Systems Architecture Conference (ACSAC, Hsinchu, Taiwan), August 2008. (DOI: 10.1109/APCSAC.2008.4625436)

24. C.-H. Huang, K.-J. Shih, C.-S. Lin, S.-S. Chang, and P.-A. Hsiung, "Dynamically Swappable Hardware Design in Partially Reconfigurable Systems," Proceedings of the IEEE International Symposium on Circuits and Systems (ISCAS, New Orleans, USA), pp. 2742-2745, IEEE Press, May 2007 (invited as regular paper).

25. P.-A. Hsiung, S.-W. Lin, Y.-R. Chen, C.-H. Huang, J.-J. Yeh, H.-Y. Sun, C.-S. Lin, and H.-W. Liao, "Model Checking Timed Systems with Urgencies," Proceedings of the 4th International Symposium on Automated Technology for Verification and Analysis (ATVA, Beijing, China), LNCS Vol. 4218, pp. 67-81, Springer-Verlag, October 2006.

26. P.-A. Hsiung, C.-H. Huang, and C.-F. Liao, "Perfecto: A SystemC-based Performance Evaluation Framework for Dynamically Partially Reconfigurable Systems," Proceedings of the 16th IEEE International Conference on Field Programmable Logic and Applications, (FPL, Madrid, Spain), pp. 190-198, IEEE CS Press, August 2006.

27. S.-W. Lin, P.-A. Hsiung, C.-H. Huang, and Y.-R. Chen, "Model Checking Prioritized Timed Automata," Proceedings of the 3rd International Symposium on Automated Technology for Verification and Analysis (ATVA, Taipei, Taiwan), LNCS Vol. 3707, pp. 370-384, Springer Verlag, October 2005.

Domestic Conference Papers

1. C.-H. Huang, Y.-C. Chang, W.-T. Chen, K.-T. Wu and R.-H. Wang, "Edge and Trustworthy AI System Design based on FPGAs for Air Quality Monitoring," Proceedings of the VLSI Design / CAD Symposium, August 2023.

2. C.-H. Huang, S.-Y. Hsieh, C.-T. Weng, M.-F. Hsieh, S.-L. Ciou and C.-J. Huang, "Smart Crop Growth Monitoring based on System Adaptivity and Edge AI," Proceedings of the VLSI Design / CAD Symposium, August 2022.

3. Y.-C. Chen, C.-Y. Hsu, J.-Y. Yang, C.-H. Chang and C.-H. Huang, "An FPGA-based Intelligent Search and Rescue System using Heterogeneous Robots," Proceedings of the Workshop on System-on-a-Chip and Computer Architecture, National Computer Symposium (NCS), December 2021.  (accepted for publication)

4. C.-H. Huang, C.-Y. Hsu, Y.-C. Chen, S.-Y. Yang, W.-T. Huang and P.-R. Wu, "FPGA-based Robot System Design for Search and Rescue Applications," Proceedings of the VLSI Design / CAD Symposium, August 2021.

5. S.-U. Yang, W.-T. Huang, P.-R. Wu and C.-H. Huang, "An AI Edge-based Intelligent Search and Rescue System," Proceedings of Taiwan Academic Network Conference, October 2020. 

6. C.-H. Huang, P.-J. Chen, J.-X. Zheng, Y.-J. Lin, and B.-W. Chen, "Enhancing Agricultural and Robotic Applications using Reconfigurable Hardware," Proceedings of the VLSI Design / CAD Symposium, August 2020.

7. C.-H. Huang, Z.-W. Li, H.-T. Tseng, and P.-J. Chen, "An FPGA-based System Architecture Design for Agriculture Robotics," Proceedings of the VLSI Design / CAD Symposium, August 2019.

8. C.-H. Huang, P.-L. Lin, T.-Y. Chang, Z.-W. Li, B.-Z. Ye, Y.-C. Chiu, and Q.-Y. Lin, "An FPGA-based Intelligent Robotic Vehicle System for Agricultural Cyber Physical Systems," Proceedings of Taiwan Academic Network Conference, 2018. (DOI: 10.6861/TANET.201810.0313) (Best Oral Presentations Award)

9. C.-H. Huang, C.-Y. Chen, and H.-Y. Huang, "Hierarchical and Dependency-aware Task Mapping for NoC-based Systems," Proceedings of the VLSI Design / CAD Symposium, August 2017.

10. C.-H. Huang, Y.-Y. Tzeng, P.-Y. Li, C.-J. Ho, H.-W. Tang, and P.-S. Wu, "An Adaptive and Service-Oriented Hardware/Software System for Information Security Applications," Proceedings of the VLSI Design / CAD Symposium, August 2016.

11. H.-H. Huang, H.-Y. Chung, and C.-H. Huang, "An Interactive LCD application system," Proceedings of the Information Management and E-Commerce Management Symposium, May 2016.

12. C.-H. Huang, M.-R. Chen, and Y.-S. Wu, "Elastic and Dependency-Aware Task Mapping for Reconfigurable NoC-based Systems," Proceedings of the VLSI Design / CAD Symposium, August 2015.

13. K.-W. Tseng, C.-H. Huang, and P.-A. Hsiung, "Virtualization Architecture for Application-Oriented Network-on-Chip Systems," Proceedings of the VLSI Design / CAD Symposium, August 2015.

14. C.-Y. Wang, C.-H. Huang, and P.-A. Hsiung, "Elastic Superposition Mapping for Heterogeneous Tasks in Reconfigurable Multicore Architecture," Proceedings of the VLSI Design / CAD Symposium, August 2014.

15. C.-H. Huang, "An FPGA Implementation for Point Target Detection System," Proceedings of the VLSI Design / CAD Symposium, August 2013.

16. C.-H. Huang and P.-A. Hsiung, "Virtualizable Hardware/Software Design Infrastructure for Dynamically Partially Reconfigurable Systems," Proceedings of the VLSI Design / CAD Symposium, August 2012.

17. C.-H. Huang, J.-S. Shen, and P.-A. Hsiung, "Self-Adaptive Hardware-Software Architecture for Embedded and Ubiquitous Systems," Proceedings of the VLSI Design / CAD Symposium, August 2010. (Excellent paper recommended to the engineering and applied sciences department of the National Science Council, Taiwan, ROC.)

18. C.-H. Huang, J.-S. Shen, and P.-A. Hsiung, "Model-Based Verification and Estimation Framework for Dynamically Partially Reconfigurable Systems", Workshop on Computer Architecture, Embedded Systems and VLSI / EDA, National Computer Symposium (NCS), November 2009. (Best Paper Award, 6 best paper awards among 394 accepted papers in NCS 2009)

19. C.-H. Huang, S.-H. Chang, and P.-A. Hsiung, "Generic Wrapper Design for Dynamic Swappable Hardware IP in Partially Reconfigurable Systems," Proceedings of the VLSI Design / CAD Symposium, August 2006. (Invited for Journal Publication in the International Journal of Electrical Engineering)

Books

1. C.-H. Huang, “Mode-based Platform-Specific Co-Design Methodology for Dynamically Partially Reconfigurable Systems with Hardware Virtualization and Preemption,” Ph.D. Dissertation, Graduate Institute of Computer Science and Information Engineering, National Chung Cheng University, February 2011.

2. P.-A. Hsiung, M. D. Santambrogio and C.-H. Huang, Reconfigurable System Design and Verification, CRC Press, USA, ISBN: 978-1420062663, 2009.

Others

1. C.-H. Huang, S.-H. Chang, and P.-A. Hsiung, "Reconfigurable Digital Camera Design," Electron Technology Information Magazine, Volume 56, pp. 19-23, Gal-Lant Co. Ltd., Taiwan, August 2005. (in Chinese)

2. S.-W. Lin, C.-H. Huang, C.-H. Tseng, C.-F. Liao, and P.-A. Hsiung, "Hardware-Software Codesign of Reconfigurable Systems-on-Chip," Electron Technology Information Magazine, Volume 57, pp. 38-43, Gal-Lant Co. Ltd., Taiwan, September 2005. (in Chinese)

3. C.-W. Liu, C.-H. Huang, H.-C. Kao, and P.-A. Hsiung, "Low-Power Scheduling for Real-Time Embedded Systems," Electron Technology Information Magazine, Volume 60, pp. 16-20, Gal-Lant Co. Ltd., Taiwan, December 2005. (in Chinese)

4. C.-H. Huang, and P.-A. Hsiung, "Hardware-Software Codesign of SoC," Electron Technology Information Magazine, Volume 60, pp. 37-41, Gal-Lant Co. Ltd., Taiwan, December 2005. (in Chinese)

Project Grants

Research Project of NSTC (MOST), Taiwan

• Co-PI, Design of Integrated Command and Control Center for Sustainable Smart Cities(Ⅱ)(2/2), 2024/11~2025/10, NSTC 113-2634-F-194-001, NT$13,000,000.

  • PI, Sub-Project 3: An intelligent drone system design with edge AI and adaptability

• PI, Edge AI-based Framework with Dynamic Adaptability for Smart Agriculture Applications, 2024/08/01~2027/07/31, NSTC 113-2221-E-143 -006 -MY3, NT$2,880,000

• Co-PI, Design of Integrated Command and Control Center for Sustainable Smart Cities(Ⅱ)(1/2), 2023/11~2024/10, NSTC 112-2634-F-194-001, NT$15,230,000.

  • PI, Sub-Project 3: An intelligent drone system design with edge AI and adaptability

• Co-PI, Data Governance for  Sustainable Smart City, 2022/11~2023/10, NSTC 111-2634-F-194-003, NT$15,000,000.

  • PI, Sub-Project 3: An intelligent drone system design with edge AI and adaptability

• PI, A Reusable and Adaptive Edge AI System for the Classification and the Prediction of Pest and Disease Severity of Crops, 2022/08~2024/07, NSTC 111-2221-E-143-001-MY2, NT$1,703,000.

• Co-PI, Data Governance for  Sustainable Smart City, 2021/11~2022/10, MOST 110-2634-F-194-006, NT$18,790,000.

  • PI, Sub-Project 3: An intelligent drone system design with edge AI and adaptability

• PI, Learning-based Robotic Vehicle System for Agricultural Cyber-Physical Systems, 2018/08~2021/12, MOST 107-2221-E143-002-MY3, NT$2,183,000.

• PI, An Intelligent Robotic Vehicle System for Agricultural Cyber-Physical Systems, 2017/08~2018/07, MOST 106-2221-E-143-001, NT$766,000.

• PI, Reconfigurable Heterogeneous Multiprocessor System-on-Chip Design with Self-Adaptability and Virtualization (I), 2014/08~2015/07, MOST 103-2221-E-143-005, NT$780,000.

• PI, A Virtualizable Hardware/Software Infrastructure for Dynamically Partially Reconfigurable Systems (II), 2013/08~2014/07, NSC 102-2221-E-143-006, NT$755,000

• PI, A Virtualizable Hardware/Software Infrastructure for Dynamically Partially Reconfigurable Systems (I), 2012/08~2013/07, NSC 101-2218-E-143-001, NT$885,000

Educational Reform Project of MOE, Taiwan

• Enhancing Students' Learning Effectiveness on Foundation Courses via Spiral Curriculum and Scaffolding Theory: A Case Study on the Digital Logic Design Lab Course, MOE Teaching Practice Research Program, 2022/08~2023/07, NT$350,000.

• Spiral and Problem based Learning for Embedded Operating Systems, MOE Teaching Practice Research Program, 2021/08~2022/07, NT$300,000.

• Intelligent IoT Course Promotion Project, Ministry of Education, 2020/08/01~2021/06/30, NT$1,000,000.

• Project-oriented and Maker-based Teaching Approach for Microprocessor Systems, MOE Teaching Practice Research Program, 2020/08~2021/07, NT$360,000.

• Problem and Project based Learning for Dynamically Reconfigurable SoC Development, MOE Teaching Practice Research Program, 2019/08~2020/07, NT$380,000.

• Reconfigurable System Prototype Design and Applications & Microprocessor System, ATP Consortium, Ministry of Education, 2015/09~2016/08, NT$650,000.

• Computer Organization and Architecture Lab, ATP Consortium, Ministry of Education, 2015/09~2016/08, NT$365,625.

• SoC Design Flow and Tools, 2014/09~2015/08, ATP Consortium, Ministry of Education, NT$700,000.

• Microprocessor Design and Implementation Laboratory, ATP Consortium, Ministry of Education, 2013/09~2014/08, NT$480,000.

Industry–Academia Collaboration Project

• Developmenet of course materials for embedded operating systems, TUL Corporation, 2022/05~2022/10, NT$142,592.

Honors

• Award for Innovative Teaching Course, College of Science and Engineering, National Taitung University, Taiwan, 2021.

• Award for Excellent Course - Hardware Software Codesign, Intelligent IoT Course Promotion Project, Ministry of Education, 2021.

• Excellent Teaching Course - Dynamically Reconfigurable SoC Development, National Taitung University, 2020.

• Excellent Teaching Course - Embedded Operating Systems, National Taitung University, 2019.

• Best Oral Presentation Award, Taiwan Academic Network Conference, 2018.

• Excellent Teaching Award, National Taitung University, Taiwan, 2018.

• Excellent Teaching Course - Microprocessor System, National Taitung University, 2018.

• Excellent Teaching Course - Digital Logic Design, National Taitung University, 2018.

• Excellent Teaching Award, College of Science and Engineering, National Taitung University, Taiwan, 2018.

• Excellent Teaching Award, National Taitung University, Taiwan, 2015.

• Excellent Teaching Course - Microprocessor System, National Taitung University, 2014.

• Excellent Paper Award, Category of Computer Science and Information Engineering, sponsored by Computer Society of the Republic of China, 2010.

• ACM/Microsoft SRC Travel Award, the 1st ACM Student Research Competition (SRC) at the 47th Design Automation Conference (DAC), 2010.

• Student Forum, the 15th Asia and South Pacific Design Automation Conference (ASP-DAC), 2010.

• Best Paper Award, Proceedings of the Fourth International Conference on Embedded and Multimedia Computing (EM-Com), 2009.

• Best Paper Award, Workshop on Computer Architecture, Embedded Systems and VLSI/EDA, National Computer Symposium (NCS), 2009.

• Third Place, Hardware-Software Integration Group, Embedded System Design Contest, sponsored by the Ministry of Education, Taiwan, 2009.

• Second Place, Hardware-Software Integration Group, Embedded System Design Contest, sponsored by the Ministry of Education, Taiwan, 2008.

Professional Activities

Guest Editor

• Special Issue on "Fog Computing for Smart Systems," Wireless Communications and Mobile Computing (SCI), 2017.

• Special Issue on “Smart Reconfigurable System Modeling, Design, and Implementation,” Microprocessors and Microsystems (SCI), 2016.

• Special Issue on “Reconfigurable Cyber-Physical and Embedded System Design,” Journal of Systems Architecture (SCI), 2016.

Program Chair

• Chair, CE Sensors and MEMS (CSM), IEEE International Conference on Consumer Electronics (ICCE), 2019.

• Chair, Special Session: Cyber-Physical and Embedded System Design, IEEE International Conference on Consumer Electronics – Taiwan, 2018.

• Chair, CE Sensors and MEMS (CSM), IEEE International Conference on Consumer Electronics (ICCE), 2018.

• Co-Chair, Workshop on Computer Architecture, Embedded Systems, SoC, and VLSI/EDA, International Computer Symposium, 2014.

Convener and Publication Chair

• IEEE International Conference on Computing, Analytics and Networks (ICAN), 2019.

Technical Program Committee Member

• Track: Circuits and Systems (CAS) Designs for AIoT, IEEE International Conference on Omni-Layer Intelligent Systems (COINS), 2024.

• Computer Architecture and Platforms (CAP) symposium, the 48th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2024.

• Computer Architecture and Platforms (CAP) symposium, the 46th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2023.

• Track: Circuits and Systems (CAS) Designs for AI & IoT, IEEE International Conference on Omni-Layer Intelligent Systems (COINS), 2023.

• IEEE 12th International Conference on Consumer Electronics (ICCE-Berlin), 2022.

• Computer Architecture and Platforms (CAP) symposium, the 45th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2022.

• Track: Circuits and Systems (CAS) Designs for Future Artificial Intelligence, Internet of Things, and Big Data Applications, , IEEE International Conference on Omni-Layer Intelligent Systems (COINS), 2022.

• IEEE 11th International Conference on Consumer Electronics (ICCE-Berlin), 2021.

• Computer Architecture & Platforms (CAP) symposium, the 45th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2021.

• Topic Area Track: Internet of Things: From Device, to Edge, and Cloud, IEEE International Conference on Omni-Layer Intelligent Systems (COINS), 2020.

• Computer Architecture & Platforms (CAP) symposium, the 44th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2020.

• IEEE International Conference on Computing, Analytics and Networks (ICAN), 2020.

• Special Track: Advanced Stacking Many-core Systems and Architectures, International Conference on Omni-Layer Intelligent Systems (COINS), 2019.

• Computer Architecture & Platforms (CAP) symposium, the 43rd Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2019.

• Taiwan Academic Network Conference (TANET), 2018.

• Computer Architecture & Platforms (CAP) symposium, the 42nd Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2018.

• Computer Architecture & Platforms (CAP) symposium, the 41st Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2017.

• Symposium on Embedded & Cyber-Physical Environments (ECPE), the 40th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2016.

• Symposium on Embedded & Cyber-Physical Environments (ECPE), the 39th Annual IEEE International Computers, Software & Applications Conference (COMPSAC), 2015.

Reviewer

• International Journals

  • IEEE Transactions on Robotics

  • IEEE Transactions on Industrial Informatics

  • IEEE Transactions on Parallel and Distributed Systems

  • IEEE Transactions on Very Large Scale Integration Systems

  • IEEE Transactions on Circuits and Systems I

  • IEEE Transactions on Circuits and Systems II

  • IEEE Embedded Systems Letters

  • IEEE Computer Architecture Letters

  • IEEE Robotics and Automation Letters

  • IEEE Access

  • ACM Transactions on Reconfigurable Technology and Systems

  • ACM Transactions on Embedded Computing Systems

  • ACM Transactions on Design Automation of Electronic Systems

  • Computers and Electronics in Agriculture

  • Nano Communication Networks

  • Journal of Systems Architecture

  • Journal of Parallel and Distributed Computing

  • Journal of Supercomputing

  • Journal of Circuits, Systems, and Computers

  • Journal of Real-Time Image Processing

  • Journal of Information Science and Engineering

  • Sustainable Computing, Informatics and Systems

  • IET Wireless Sensor Systems

  • IET Computers & Digital Techniques

  • All Life

  • Multimedia Tools and Applications

  • Engineering Applications of Artificial Intelligence

• International Conferences

  • International Conference on Omni-layer Intelligent Systems (COINS)

  • International Symposium on Circuits and Systems (ISCAS)

  • Design Automation Conference (DAC)

  • IEEE Computer Society Signature Conference on Computers, Software and Applications (COMPSAC)

  • IEEE International Conference on Consumer Electronics (ICCE)

  • IEEE International Conference on Consumer Electronics – Taiwan (ICCE-TW)

  • Reconfigurable Architectures Workshop

  • Asia South Pacific Design Automation Conference

  • International SoC Conference

  • International Conference on Green Computing and Communications

  • International Conference on Engineering of Reconfigurable Systems and Algorithms

  • International Conference on ReConFigurable Computing and FPGAs

  • International Symposium on Hardware-Software Codesign and System Synthesis

  • International Conference on Field-Programmable Technology

  • International Conference on Field Programmable Logic and Applications

  • International Workshop on Reconfigurable and Multicore Embedded Systems

  • Workshop on Embedded System Software Development and Quality Assurance

  • International Conference on Embedded and Ubiquitous Computing