Are you looking for a cost-effective way to make the most out of your experience with wood-burning hot tubs? If yes, then TimberLine wood fired hot tub heater is the right choice. It’s very affordable to operate and is ideal to use in cottage country.
Generally, people enjoy the pleasures of soaking in a wood-fired hot tub during weekends and holidays in the cottage country. However, wood-fired heating kits deliver a considerable amount of heat. The water can be heated within one to four hours, depending on the starting temperature and tub size or volume.
Understanding TimberLine Wood Burning Hot Tub Heater –
The TimberLine Wood Water Stoves are the precision-building wood-burning water heating systems engineered specifically for the use in hot tubs and above the ground pools. The stoves are responsible for circulating water using the Thermosiphon Principle as the pumping action is created by rising hot water. As a result, it won’t require any circulating pump or electricity. Currently, you can have a basic soaking tub without chemicals, pumps, or high maintenance.
The body of the wood-fired stove is made from superior-grade (340) stainless steel. Therefore, you can use it outside. Though the firebox is made from stainless steel, it will withstand years of use without any chance of burning out. Its smoke outlet has a unique vented collar that offers secondary combustion of unburned gases for minimizing the rate of chimney sparks and smoke emissions.
Using the sophisticated heat exchange design, the TimberLine Wood Water Stoves provide highly efficient water heating solutions. The stainless steel made stove body around the firebox has a double-walled water-jacket with a 1.5-inch space in between. As a result, it makes the entire firebox excluding the front a heat transfer surface.
The heat transfer occurs inside a water-filled baffle plate that horizontally runs through the firebox. The baffle is responsible for deflecting the path of the fire, which results in giving up more heat into the water jacket before going towards the chimney.
How Do You Install the Hot Tub Heater?
Use the accessories provided in the TimberLine Wood Fired Hot Tub Heater kit, like the flexible neoprene tubes, thru-wall tub ports, and stainless steel pipe. The tub wall thickness must be specified to understand the length of the thru-wall ports.
For Simple and Easy Installation, Follow the Below-Discussed Tips:
1. Prepare a foundation made from brick or cement next to the hot tub.
2. Cut 1 7/8 inch holes in the side of the hot tub wall for thru-wall ports.
3. Install pipes to connect the heater to the tub.
4. Install the stove pipe. The recommended size is 8 feet.
How Do You Operate?
The operation is the same as a conventional wood stove. It has the fastest heating capability than dry hardwoods. You will need the 17-inch wood and 18-inch x 14-inch x 14-inch firebox for the operation. Generally, you can get the most efficient heating from 17-inch x 1 1/2-inch x 1 1/2-inch wood, which should be loaded at 45 minutes intervals.
The wood hot tub heater comes with a high and low-speed draft control for the regulation of heating rate. It will start operating with a widely opened draft for quick heating and closed down for temperature maintenance when the water gets hot.
Bottom Line –
Are you looking to buy the TimberLine Wood Water Stove for wood-burning hot tubs? If yes, you should look no further than Cedar Tubs. For more details about our hot tubs and heating options available, feel free to visit our website at https://www.cedartubs.com/.