Membership is now open for 2017.
Senior Members - £12.50
Junior Members - £6.00
WHY BECOME A MEMBER?
1) as of the 3rd February weekly race fee's will be.
----Senior Member £4-----Senior Non Member £5
----Junior Member £3-----Junior Non Member £4
2) only "Club Members" will be awarded points in any club championship's run and only
"Club Members" will be able to collect any trophies awarded.
---------------------------------------------------------------------------------------
Capel Le Ferne RC Car Club Rules
Tamiya Minis Rules
• Any Tamiya two wheel drive mini
• Chassis - Assembled as per instruction manual. (No FWD to RWD M-03 conversions) Unnecessary parts may be left off during assembly (rolls bars on M-05, electronics trays) but no part may be sawed, cut, or milled from chassis.
• Gear or Ball differentials permitted. (No spools or locked diffs)
• Any Tamiya hop up (excluding speed tuned gear set)
•Maximum size pinion 20T
•Speed tuned or fast gear sets are not permitted
• Any Mini tyre on 42mm rim (no double insert or foam tyres)
• 5mm ground clearance
• Lexan Body shells only (No GT style bodies which can raise the rear wheels of the car in front)
• All car bodies must use the wings that are supplied in the kit
• Any commercially available 2s Lipo (Lipo must be hard cased) or 6 cell NiCad or NiMH
• Max voltage rating to be 7.4v for Lipo and 7.2v (NiCad or NiMH)
The Mini class is two classes
Capel Le Ferne RC Car Club Rules
Tamiya Minis Rules
• Any Tamiya two wheel drive mini (NO 4WD models)
• Chassis - Assembled as per instruction manual. (No FWD to RWD M-03 conversions) Unnecessary parts may be left off during assembly (rolls bars on M-05, electronics trays) but no part may be sawed, cut, or milled from chassis.
• Minimum Weight - 1200g
• Gear or Ball differentials permitted. (No spools or locked diffs)
• Any Tamiya hop up (excluding speed tuned gear set)
•Maximum size pinion 20T
•Speed tuned or fast gear sets are not permitted
• Any Mini tyre on 42mm rim (no double insert or foam tyres)
• 5mm ground clearance
• Lexan Body shells only (No GT1 style bodies which can raise the rear wheels of the car in front)
• Wings should be in keeping with the scale form of the car
• Any commercially available 2s Lipo (Lipo must be hard cased) or 6 cell NiCad or NiMH
• Max voltage rating to be 7.4v for Lipo and 7.2v (NiCad or NiMH)
The Mini class is two classes
Formula 1
Brushless
Only the following brushless combo is permitted
HobbyWing EZRun Series 13T/3650-M Combo
Only the Combo-B1 is permitted which consists of the EZRUN-35A speedo and the 13T@3000KV EZRUN-3650M motor. No other brushless speedos or motors are permitted at this time. Speed controller software must not be altered in any way. Altering the standard parameters using the supplied programmer device on it's own is allowed.
Formula 2
Brushed
Tamiya Mabuchi RS-540SH sliver can motor with sliver/grey end NOT black
The motor MUST be bought through the club and be marked by the club
Silver can motors from other manufacturers such as Mardave are NOT permitted
Motors must not be tampered with in any way such as altering the timing.
Any Speed controller
One last thing, after each time you race you MUST come out and Marshall the next heat,
this is not a huge issue but there are the odd driver's that DO NOT (you know who you are!)
Points or laps will be deducted by race control if neccessary.
See you all Friday
Mark