SendBpodSoftCode()

Description

Sends a byte code via USB to the Bpod state machine. The byte code can be handled during a trial like any other behavior event. By default, 15 bytes are reserved for soft codes (1-15). Note: To access the MATLAB command line during a trial, you must use the BpodTrialManager class to run the trial's state machine.

Syntax

SendBpodSoftCode(SoftCodeByte)

Parameters

• SoftCodeByte: A byte to send to the state machine

  • Note: The byte must be in the range of supported soft code bytes. By default the range is 1-15.

Returns

• None

Examples

% Example: Send a 5 to the state machine after a random delay, triggering a state change

sma = NewStateMachine;

sma = AddState(sma, 'Name', 'MyState', ...

'Timer', 0,...

'StateChangeConditions', {'SoftCode5', 'MyNextState'},...

'OutputActions', {});

sma = AddState(sma, 'Name', 'MyNextState', ...

'Timer', 0,...

'StateChangeConditions', {'Tup', '>exit'},...

'OutputActions', {});

T = BpodTrialManager; % Create an instance of the trial manager

T.startTrial(sma); % Start running the state machine

pause(rand*5);

SendBpodSoftCode(5);

RawEvents = T.getTrialData;

clear T