LoadBpodFirmware()

Description

Launches a tool to load firmware to any Bpod state machine or module.

Usage

• Select the target state machine version or module from the 'Firmware' menu.

• Select the firmware version from the 'Version' menu. The latest firmware in Bpod_Gen2 will be selected by default.

• Select the target serial port from the 'Port' menu. If you don't know the target serial port, close the tool, unplug all other Bpod and Arduino devices from the PC and re-run LoadBpodFirmware.

• Press 'Load' to load the firmware to the device. 

  • Most devices are programmed in a few seconds

  • State Machine r0.5-r1.0 may take several minutes. This is normal.

  • A confirmation popup will indicate when the firmware has been successfully updated