Journals
Seifi, S.H., Nellippallil, A.B., Tian, W., Yadollahi, A., Bian, L. and Prabhu, R.K. (2025) “A robust design exploration approach for the integrated inverse design of additive manufacturing process chain.” International Journal on Interactive Design and Manufacturing (IJIDeM), pp.1-13.
Mahtabi, M., Yadollahi, A.*, Morgan-Barnes, C., Priddy, M.W. and Rhee, H. (2024) “Effects of Powder Reuse and Particle Size Distribution on Structural Integrity of Ti-6Al-4V Processed via Laser Beam Directed Energy Deposition.” Journal of Manufacturing and Materials Processing, 8(5), p.209.
Handler, E., Yadollahi, A., Liu, Y. and Thompson, S.M. (2024) “Determining the Effects of Inter-Layer Time Interval in Powder-Fed Laser-Directed Energy Deposition on the Microstructure of Inconel 718 via In Situ Thermal Monitoring.” Materials, 17(3), p.538.
Yadollahi, A.*, Buiter, L., Mahtabi, M.J., Doude, H.R., Rhee, H. and Newman Jr, J.C. (2024) “Fatigue Life and Crack Growth Behavior of Ti-6Al-4V Fabricated via Laser Directed Energy Deposition.” Materials Performance and Characterization, 13(2).
Mahtabi, M., Yadollahi, A.*, Ataollahi, S. and Mahtabi, M.J. (2023) “Effect of build height on structural integrity of Ti-6Al-4V fabricated via laser powder bed fusion.” Engineering Failure Analysis, 154, p.107691.
Mahtabi, M., Yadollahi, A.*, Stokes, R., Doude, H. and Priddy, M. (2023) “Effect of build interruption during laser powder bed fusion process on structural integrity of Ti-6Al-4V.” Engineering Failure Analysis, 153, p.107626.
Rescsanski, S., Yadollahi, A., Khanzadeh, M. and Imani, F. (2023) “Anomaly Detection of Laser-Based Metal Additive Manufacturing Using Neural-Variational Auto-Encoder.” In International Manufacturing Science and Engineering Conference (Vol. 87233, p. V001T01A026). American Society of Mechanical Engineers.
Ataollahi, S., Mahtabi, M., Yadollahi, A., & Mahtabi, MJ. (2023) “Computational modeling of the effects of process parameters on the grain morphology of additively manufactured stainless steel. The International Journal of Advanced Manufacturing Technology, 125(7-8), 3513-3526.
Chen, R., Sodhi, M., Imani, M., Khanzadeh, M., Yadollahi, A., & Imani, F. (2023) “Brain-inspired Computing for In-process Melt Pool Characterization in Additive Manufacturing.” CIRP Journal of Manufacturing Science and Technology, 41, 380-390.
Stokes, R., Yadollahi, A., Doude, H., Priddy, D., & Bian, L., Hammond, VH., (2022) “Effects of Build Interruptions on the Microstructure and Mechanical Properties of LPBF Al-Si-10Mg.” Journal of Materials Processing Technology, 1-13.
Bagheri, A., Yadollahi, A., Tian, W., Doude, H., & Bian, L., (2022) “Microstructure-Based MultiStage Fatigue Modeling of NiTi Alloy Fabricated via Direct Energy Deposition (DED).” Journal of Materials Engineering Performance, 31 (6), 4761-4775.
Seifi, SH., Yadollahi, A., Tian, W., Doude, H., Hammond VH, & Bian, L., (2021) “In-Situ Nondestructive Fatigue-life Prediction of Additive Manufactured Parts by Establishing a Process-Defect-Property Relationship.” Advanced Intelligent Systems, DOI: 10.1002/aisy.202000268
Bayati, P., Safaei, K., Nematollahi, M., Jahadakbar, A., Yadollahi, A., Mahtabi, M. and Elahinia, M., (2021) “Toward Understanding the Effect of Remelting on the Additively Manufactured NiTi.” The International Journal of Advanced Manufacturing Technology, 112, 347–360.
Yadollahi, A.*, Mahmoudi, M., Elwany, A., Bian, L., Doude, H., & Newman, JC., (2020) “Fatigue-Life Prediction of Additively Manufactured Material: Effects of Building Orientation, Defect’s Location, and Crack Coalescence.” Fatigue Fract Eng Mater Struct. (FFEMS), 43.4, 831-844.
Yadollahi, A.*, Mahmoudi, M., Elwany, A., Bian, L., Doude, H., & Newman, JC., (2020) “Effect of Building Orientation and Heat Treatment on Fatigue Crack-Growth Behavior of Additively Manufactured 17-4 PH SS.” Engineering Fracture Mechanics, 226, 106874.
Kluss, J. V., Chalaki, M. R., Whittington, W., Rhee, H., Whittington, S., Yadollahi, A., (2019) “Porcelain Insulation – Defining the Underlying Mechanism of Failure.” High Voltage, 4(2), 81-88.
Yadollahi, A.*, Mahtabi, MJ., Khalili, A., Doude, H., & Newman, JC., (2018) “Fatigue-Life Prediction of Additively Manufactured Material: Effects of Surface Roughness, Defect’s Size and Shape.” Fatigue Fract Eng Mater Struct. (FFEMS), 41(7), 1602-1614.
Mahtabi, MJ., Yadollahi, A., Rahmati, M., & Stone, TW., (2018) “Correlation Between the Hardness and the Loading Stress Plateau of Superelastic NiTi.” Arabian Journal for Science and Engineering, 43(9), 5029-5033.
Khanzadeh, M., Tian, W., Yadollahi, A., Doude, H. R., Tschopp, M. A., & Bian, L. (2018). “Dual process monitoring of metal-based additive manufacturing using tensor decomposition of thermal image streams.” Additive Manufacturing, 23, 443-456.
Yadollahi, A., Shamsaei, N., (2017) Additive Manufacturing of Fatigue Resistant Materials: Challenges and Opportunities.” International Journal of Fatigue, 98, 14–31.
Mahmoudi, M., Elwany, A., Yadollahi, A., Thompson, SM., Bian, L., & Shamsaei, N. (2016) "Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel." Rapid Prototyping Journal, 23(2).
Yadollahi, A., Shamsaei, N., Thompson, SM., Bian, L., & Elwany, A. (2016) “Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel.” International Journal of Fatigue, 94, Part 2, 218–235.
Yadollahi, A., & Shamsaei, N. (2016). “Supporting Data for the Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted17-4 PH Stainless Steel.” Data in Brief, 7, 89-92.
Yadollahi, A., Shamsaei, N., Hammi, Y., & Horstemeyer, MF. (2016) “Quantification of Tensile Damage Evolution in Additive Manufactured Austenitic Stainless Steels.” Materials Science and Engineering: A, 657, 399-405.
Yadollahi, A., Shamsaei, N., Thompson, SM., & Seely, D. (2015). “Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel.” Materials Science and Engineering: A, 644, 171-183.
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, SM. (2015). “An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control.” Additive Manufacturing, 8, 12-35.
Thompson, SM., Bian, L., Shamsaei, N., & Yadollahi, A. (2015). “An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics.” Additive Manufacturing, 8, 36-62.
Yadollahi, A., Talebiooti, R., & Shojaeifard, MH. (2013). “Improvement of Muffler Transmission Loss Using Micro-Perforated Panel.” Aerospace Mechanics Journal, 9(2), 25-31.
Marzbanrad, J., & Yadollahi, A. (2012). “Fatigue Life of an Anti-Roll Bar of a Passenger Vehicle.” International Journal of Mechanical and Aerospace Engineering, 6, 274-280.
Shojaeifard, MH., Talebitooti, R., & Yadollahi, A. (2011). “Optimization of sound transmission through laminated composite cylindrical shells by using a genetic algorithm.” Mechanics of Composite Materials, 47(4), 481-494.
Peer-reviewed Conferences
Seifi, SH., Yadollahi, A., & Bian, L., Data Driven Fatigue Modeling of Additively Manufactured Parts by Establishing Process-Structure-Property relationship, INFORMS Annual Meeting, 2019, Washington State, WA, USA.
Morgan C.B., Yadollahi, A., Doude, H., & Bian, L., Effects of Powder Characteristics, Recycling, and Process Parameters on the Microstructural and Mechanical Properties of Direct Energy Deposition Ti-6Al-4V, AMPM 2019, Phoenix, AZ, USA.
Yadollahi, A., Mahtabi, MJ., Doude, H., & Newman, JC., Prediction of Fatigue Lives in Additively-Manufactured Alloys based on the Crack-Growth Concept, 28th SFF Symposium, 2017, Austin, TX, USA.
Yadollahi, A., Shamsaei, N., Thompson, SM., Elwany, A., & Bian, L., Mechanical and Microstructural Properties of Selective Laser Melted 17-4 PH Stainless Steel, ASME/ IMECE, 2015, Houston, TX, USA.
Yadollahi, A., Shamsaei, N., Thompson, SM., Elwany, A., & Bian, L., and Mahmoudi, M. Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel, Solid Freeform Fabrication Symposium, 2015, Austin, TX, USA.
Yadollahi, A., Seely, D., Patton, B., & Shamsaei, N., Microstructural Features and Mechanical Properties of 316L Stainless Steel fabricated by Laser Additive Manufacture, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, 2015, Kissimmee, FL, USA.
Yadollahi, A., Shojaeifard, MH., & Talebitooti, R., Transmission Loss of Exhaust Muffler with Perforated Tube using Boundary Element Method, 7th International Conference on Internal Combustion Engines, 2011, Tehran, Iran.
Yadollahi, A., & Shojaeifard, MH., Talebitooti, R., Interior noise treatment of the 2-D passenger car considering both BEM and FEM techniques, 1st International Conference on Acoustics and Vibration (ISAV), 2011, Tehran, Iran.
Yadollahi, A., Shojaeifard, MH., & Talebitooti, R., Calculation of Sound Transmission Loss from Muffler Using Three-Point Method, 19th Annual Conference on Mechanical Engineering (ISME), 2010, Birjand, Iran.