Publications

Edited Books

1. Metal Forming Processes: Developments in Experimental and Numerical Approaches Edited by Kakandikar Ganesh Marotrao, Dr. Vishwanath Karad MIT World Peace University, India, Anupam Agrawal, IIT Ropar, India and D. Ravi Kumar, IIT Delhi, India, August 2022. link:

Book Chapters

1. Kumar, R., Agrawal, A. (2024). "Emerging Functionally Graded Materials for Bio-implant Applications—Design and Manufacturing". In: Mahajan, A., Devgan, S., Zitoune, R. (eds) Additive Manufacturing of Bio-implants. Biomedical Materials for Multi-functional Applications. Springer, Singapore. https://doi.org/10.1007/978-981-99-6972-2_9

2. Anubhav, R. Kumar, S.K. Nandi, A. Agrawal, (2023). Influence of Build Orientation on Tensile and Flexural Strength of FDM Fabricated ABS Component, Adv. Addit. Manuf. Met. Joining, Lect. Notes Mech. Eng., Springer Nature, 2023: pp. 177–187. https://doi.org/10.1007/978-981-19-7612-4_15. 

3. Gupta, S., Gupta, S., Agrawal, A., & Singla, E. (2022). “A Task-Based Dimensional Synthesis of an Upper-Limb Exoskeleton: A Hybrid Configuration”. In Machines, Mechanism and Robotics (pp. 1329-1336). Springer, Singapore. https://doi.org/10.1007/978-981-16-0550-5 126 

4. Rai S., Kishore H., Kumar Nirala H., Agrawal A. (2020). Finite Element Analysis of Sheet Thickness and Force Variation in AA6063 During Single Point Incremental Forming. In: Shunmugam M., Kanthababu M. (eds) Advances in Simulation, Product Design and Development. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9487-5_13

5. Hreetabh, Nirala C.K., Agrawal A. (2019). A New Approach for Fabrication of Complex-Shaped Arrayed Micro Electrodes. In: Shunmugam M., Kanthababu M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9425-7_3.

6. Gupta, S., Agrawal, A., & Singla, E. (2019). “Wearable Upper Limb Exoskeletons: Generations, Design Challenges and Task Oriented Synthesis”. New Trends in Medical and Service Robotics- 134-142. https: //doi.org/ 10.1007/978-3-030-00329-6_16.

7. Nirala H.K., Agrawal A. (2018). Sheet Thinning Prediction and Calculation in Incremental Sheet Forming. In: Pande S., Dixit U. (eds) Precision Product-Process Design and Optimization. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-10-8767-7_15.

International Journals

1. Pal, M.; Agrawal, A.; Nirala, C.K., "Enhancing formability in Micro-Incremental sheet forming by a novel stacking method of ultra-thin sheets", Manufacturing Letters (2024), Volume 40, July 2024, Pages 159-163, https://doi.org/10.1016/j.mfglet.2024.05.002 (Impact Factor: 3.9).

2. Singh, M., Gill, A.S., Deol, P.K., Agrawal, A., Fabrication of drug-loaded graded porous Ti6Al4V structures for load-bearing biomedical applications. Journal of Materials Research (2024). https://doi.org/10.1557/s43578-024-01335-3 (Impact Factor: 2.7)

3. Kumar R., Agrawal A., "Bio-corrosion susceptibility of surface voids and pores in microwave sintered Ti-HAp based bio-composites", Materials Letters Volume 361, 15 April (2024), 136168, https://doi.org/10.1016/j.matlet.2024.136168 (Impact Factor: 3.0)

4. Bombe D., Kumar R., Nandi S.K., Agrawal A., "Semi-analytical formulation for single-track laser powder-bed fusion process to estimate melt-pool characteristics considering fluid-flow and Marangoni effect", International Journal on Interactive Design and Manufacturing (2023), https://doi.org/10.1007/s12008-023-01593-1 (Impact Factor: 2.1)

5. Kishore, H.; Pal, M.; Nirala, C.K.; Agrawal, A., "Thermal Performance Evaluation of Micro Pin–Fin Heat Exchangers: Part II—Numerical Simulation and Fabrication Demonstration", International Journal of Precision Engineering and Manufacturing (2023), https://doi.org/10.1007/s12541-023-00926-0 (Impact Factor: 1.9)

6. Kishore, H.; Pal, M.; Nirala, C.K.; Agrawal, A., "Thermal Performance Evaluation of Micro Pin–Fin Heat Exchangers: Part I—Geometrical Design Parameters Optimization", International Journal of Precision Engineering and Manufacturing (2023), https://doi.org/10.1007/s12541-023-00925-1 (Impact Factor: 1.9)

7. Kumar, N., Lingam, R., Agrawal, A., "Enhancement of incremental forming process formability by using improved clamping and multi-stage deformation strategies". International Journal of Advanced Manufacturing Technology, 129, 659–670 (2023). https://doi.org/10.1007/s00170-023-12298-w. (Impact Factor: 3.4)

8. Kumar N., Bharti S., Hariharan K., Agrawal A., "Exploring deformation mechanics of temperature assisted incremental forming with hybrid heating", Journal of Manufacturing Processes Volume 104, 27 October (2023), Pages 472-484, https://doi.org/10.1016/j.jmapro.2023.09.017. (Impact Factor: 6.2)

9. Kumar N., Upadhyay R.K., Sharma C.S., Agrawal A.. "Surface quality enhancement of warm incremental forming process using solid lubricant with varying etching period". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, IMechE (2023), https://doi.org/10.1177/09544054231194106 (Impact Factor: 2.6)

10. Bharti S., Karthik S.K., Hariharan K., Agrawal A., S. K. Panigrahi. "Investigation of feature-based and space-filling tool path strategies for formability in incremental sheet metal forming", International Journal of Material Forming, Volume 16, article no. 60 (2023). 15 September (2023), https://doi.org/10.1007/s12289-023-01781-0. (Impact Factor: 2.4)

11. Kishore, H.; Nirala, C.K.; Agrawal, A. "Thermal performance index based characterization and experimental validation for heat dissipation by unconventional arrayed micro pin-fins". Volume 43, 1 August (2023), 102015, Thermal Science and Engineering Progress. https://doi.org/10.1016/j.tsep.2023.102015 (Impact Factor: 4.8)

12. Kumar R., Agrawal A., "Micro-hydroxyapatite reinforced Ti-based composite with tailored characteristics to minimize stress-shielding impact in bio-implant applications". J Mech Behav Biomed Mater . (2023) Jun;142:105852. https://doi.org/10.1016/j.jmbbm.2023.105852. Epub 2023 Apr 13. (Impact Factor: 3.9)

13. Gupta, S., Agrawal, A., & Singla, E. “Muscle weakness assessment tool for automated therapy selection in elbow rehabilitation”. Volume 41,Issue 3 , March (2023), pp. 833 - 849 Robotica. https://doi.org/10.1017/S0263574722000844 (Impact Factor: 2.7)

14. Shubhra Kamal Nandi, Rakesh Kumar, Anupam Agrawal, Computationally inexpensive semi-analytical thermal model to predict melt-pool dimensions for a single-track in Selective Laser Melting, Journal of Manufacturing Processes, Volume 80, 2022, Pages 469-479, https://doi.org/10.1016/j.jmapro.2022.06.025. (Impact Factor: 6.2)

15. Hreetabh Kishore, Chandrakant K. Nirala, Anupam Agrawal, Exploring AZ31B magnesium alloy for innovative micro products by reverse-μEDM, Materials Letters, Volume 328, 2022, 133109, https://doi.org/10.1016/j.matlet.2022.133109. (Impact Factor: 3.0) 

16. Singh, M., Gill, A.S., Deol, P.K., Agrawal, A., Sidhu, S.S. Drug eluting titanium implants for localised drug delivery. Journal of Materials Research (2022). https://doi.org/10.1557/s43578-022-00609-y (Impact Factor: 2.7)

17. Singh A, Agrawal A. Single point incremental bending: Bending load evaluations and process validation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. May 2022., https://doi.org/10.1177/09544054221100316 (Impact Factor: 2.6)

18. Harish Kumar Nirala, Anupam Agrawal, Adaptive increment based uniform sheet stretching in Incremental Sheet Forming (ISF) for curvilinear profiles, Journal of Materials Processing Technology, Volume 306, 2022, 117610,  https://doi.org/10.1016/j.jmatprotec.2022.117610, (Impact Factor: 6.3)

19. Gupta, Sakshi, Anupam Agrawal, and Ekta Singla, Architectural design and development of an upper-limb rehabilitation device: a modular synthesis approach, Disability and Rehabilitation: Assistive Technology, 2022, 1-15, https://doi.org/10.1080/17483107.2022.2071486, (Impact Factor: 2.2)

20. Hreetabh Kishore, Chandrakant K. Nirala, Anupam Agrawal & Basil Kuriachen,  "Assessment of process parameters and performance enhancement through a novel suction flushing technology in RμEDM". Materials and Manufacturing Processes, pp 1476-1488, Vol-36(Issue-13), (2021), DOI:10.1080/10426914.2021.1948051, (Impact Factor: 4.8)

21. Gupta, Sakshi, Sameer Gupta, Anupam Agrawal, and Ekta Singla, "A Novel Modular Approach for Kinematic Modelling and Analysis of Planar Hybrid Manipulators." Journal of Mechanical Design, pp 1-14, Vol-143(9), (2021), doi.org/10.1115/1.4050305. (Impact Factor: 3.3).

22. Harish Kumar Nirala, Anupam Agrawal, Residual stress inclusion in the incrementally formed geometry using Fractal Geometry Based Incremental Toolpath (FGBIT), Journal of Materials Processing Technology, pp 1-11, Vol- 279(5), (2020). doi.org/10.1016/j.jmatprotec.2019.116575. (Impact Factor: 6.3).

23. Kumar, N., Singh, A. & Agrawal, A. Formability Analysis of AA1200 H14 Aluminum Alloy Using Single Point Incremental Forming Process. Trans Indian Inst Met, pp 1975–1984, Vol- 73, (2020). https://doi.org/10.1007/s12666-020-02014-7 (Impact Factor- 1.391)

24. Hreetabh Kishore, Chandrakant K. Nirala, Anupam Agrawal, "Feasibility demonstration of µEDM for fabrication of arrayed micro pin-fins of complex cross-sections", Manufacturing Letters, pp- 14-18, Vol- 23, (2020), https://doi.org/10.1016/j.mfglet.2019.11.005. (Impact Factor: 3.9).

25. Surinder Singh, Viney Ghai, Anupam Agrawal, Harpreet Singh, (2019) "A Effect of machining parameters on cutting force during micro-turning of a brass rod", Materials and Manufacturing Processes, pp 1816-1823, Vol 34(16), (2019), doi.org/10.1080/10426914.2019.1675887. (Impact Factor: 4.8).

26. Nirala HK, Agrawal A., “A Novel Electromagnetic Fixture for Incremental Sheet Metal Forming” Transaction of The ASME: Journal of Manufacturing Science and Engineering. pp 1-10, Vol- 141(3), (2019), doi:10.1115/1.4042109, (Impact Factor: 4.0) 

27. Singh, A., Agrawal, A., " Investigation of parametric effects on geometrical inaccuracies in deformation machining process”, Transaction of The ASME: Journal of Manufacturing Science and Engineering, pp- 1-8, Vol- 140(7), (2018), doi.org/10.1115/1.4039586, (Impact Factor: 4.0)

28. Nirala, H.K.,  Agrawal, A., “Fractal Geometry Rooted Incremental Toolpath for Incremental Sheet Forming”, Transaction of The ASME: Journal of Manufacturing Science and Engineering, pp 1-9, Vol- 140(2), (2018), doi.org/10.1115/1.4037237, (Impact Factor: 4.0)

29. Singh, A., Agrawal, A., "Experimental and numerical investigations on structural thinning, thinning evolution and compensation stratagem in deformation machining stretching mode", Journal of Manufacturing Process; pp 216-225, Vol-26, (2017), doi.org/10.1016/j.jmapro.2017.02.013, (Impact Factor: 6.2) 

30. Singh, A., Agrawal, A., “Experimental force modeling for deformation machining stretching mode for aluminium alloys.” Sādhanā: Academic proceedings in Engineering Sciences, pp- 271-280, Vol- 42, (2017),  doi:10.1007/s12046-017-0592-1 (Impact Factor: 1.6)

31. Singh, A., Agrawal, A., “Investigations on structural thinning and compensation stratagem in deformation machining stretching mode”, Manufacturing Letters; pp- 1-6, Vol-9, (2016),  doi.org/10.1016/j.mfglet.2016.06.001 (Impact Factor: 3.9)

32. Singh A., Agrawal A., "Comparison of deforming forces, residual stresses and geometrical accuracy of deformation machining with conventional bending and forming", Journal of Materials Processing Technology, pp- 259-271, Vol- 234, (2016), doi.org/10.1016/j.jmatprotec.2016.03.032 (Impact Factor: 6.3)

33. Singh A., Agrawal A., "Investigation of Surface Residual Stress Distribution in Deformation Machining Process for Aluminum Alloy” Journal of Materials Processing Technology, pp- 195-202,  Vol- 225, (2015), doi.org/10.1016/j.jmatprotec.2015.05.025  (Impact Factor: 6.3) 

34. Grewal, H.S., Arora, H.S. Singh, H., Agarwal, A., Mukherjee, S., “Improving  slurry erosion performance of hydroturbine steel using friction stir processing”, Transactions of the ASME- Journal of Tribology, pp- 1-10, Vol. 136(4), (2014), https://doi.org/10.1115/1.4027622 (Impact Factor: 2.5)

35. Grewal, H.S., Singh, H., Agarwal, A., “Phenomenological model to predict the slurry erosion behavior of thermal spray coatings”, Tribology Letters, pp. 119-132, Vol. 56(1), (2014), doi.org/10.1007/s11249-014-0391-3 (Impact Factor: 3.2)

36. Grewal, H.S., Singh, H., and Agrawal, A., “Slurry erosion performance of Ni-alumina thermal spray coatings: Effect of impingement angle”, Journal of Thermal Spray Technology, pp- 389-401,  Vol. 23, (2014), doi.org/10.1007/s11666-013-0013-x, (Impact Factor: 3.1)

37. Grewal, H.S., Agrawal, A., and Singh, H., “Slurry erosion mechanism of hydroturbine steel: Effect of operating parameters”, Tribology Letters, pp- 287-303, Vol. 52, (2013), doi.org/10.1007/s11249-013-0213-z, (Impact Factor: 3.2)

38. Grewal, H.S., Agrawal, A., and Singh, H., “Slurry erosion performance of Ni-Al2O3 based composite coatings”, Tribology International, pp- 296-306, Vol. 66, (2013), doi.org/10.1016/j.triboint.2013.06.010, (Impact Factor: 6.2)

39. Grewal, H.S., Agrawal, A., and Singh, H., “Identifying erosion mechanism: A novel approach”, Tribology Letters, pp-1-7,  Vol. 51 (1), (2013), doi.org/10.1007/s11249-013-0156-4, (Impact Factor: 3.2)

40. Grewal, H.S., Singh, H., and Agrawal, A., “Understanding liquid impingement erosion behaviour of nickel-alumina based thermal spray coatings”, Wear, pp- 424-433, Vol. 301(1-2), (2013),  doi.org/10.1016/j.wear.2013.01.063, (Impact Factor: 5.0)

41. H. S. Grewal, H. S. Arora, Anupam Agrawal, H. Singh, “Surface Modification of Hydroturbine Steel using Friction Stir Processing”, Applied Surface Science, pp- 547- 555,  Vol. 268 (1), (2013), https://doi.org/10.1016/j.apsusc.2013.01.006, (Impact Factor: 6.7)

42. H. S. Grewal, H. Singh, Anupam Agrawal, “Microstructural and Mechanical Characterization of Nickel-Alumina Thermal Sprayed Coatings”, Surface and Coating Technology, pp- 78-92, Vol. 216, (2013), https://doi.org/10.1016/j.surfcoat.2012.11.029, (Impact Factor: 5.4)

43. H. S. Grewal, Anupam Agrawal, H. Singh, “Design and Development of High-Velocity Slurry Erosion Test Rig using CFD”, Journal of Materials Engineering and Performance, pp- 152-161, Vol-22, (2013), https://doi.org/10.1007/s11665-012-0219-y (Impact Factor: 2.3)

44. Grewal, H. S., Agrawal, A., Singh, H.,and Arora, H. S., “Cavitation erosion Studies on Friction Stir Processed Hydroturbine Steel”, Transactions of Indian Institute of Metals, Vol. 65(6), pp. 731-734, Vol- 65(6), (2012), https://doi.org/10.1007/s12666-012-0197-7, (Impact Factor: 1.391)

45. Agrawal, A., Ziegert, J., Smith, S., Woody, B., Cao, J., (2012) Study of Dimensional Repeatability and Fatigue Life for Deformation Machining Bending Mode, Transaction of The ASME: Journal of Manufacturing Science and Engineering, pp- 1-11, 134(6), (2012), doi.org/10.1115/1.4007716  (Impact Factor: 4.0)

46. Agrawal, A., Reddy, N.V., Dixit, P.M., (2011), Prediction of Wrinkling and Determination of Minimum Blank holding Pressure in Multistage Deep Drawing, Transaction of The ASME: Journal of Manufacturing Science and Engineering, pp- 1-8, Vol- 133(6), (2012), doi.org/10.1115/1.4004926, (Impact Factor: 4.0)

47. Agrawal, A., Reddy, N.V., Dixit, P.M., Optimal Blank Shape Prediction Considering Sheet Thickness Variation: An Upper Bound Approach, Journal of Materials Processing Technology, pp- 249-258, Vol- 196(1-3), (2008), doi.org/10.1016/j.jmatprotec.2007.05.046, (Impact Factor: 6.3)

48. Agrawal, A., Reddy, N.V., Dixit, P.M., Determination of Optimum Process Parameters for Wrinkle Free Products in Deep Drawing Process, Journal of Materials Processing Technology, pp- 51-54, Vol- 191(1-3), (2007), doi.org/10.1016/j.jmatprotec.2007.03.050 (Impact Factor: 6.3)

49. Deep, K.S., Reddy, N.V., Agrawal, A., Ramkumar, J., A Mathematical Model for Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing, Proc. IMechE, Part B: Journal of Engineering Manufacture, pp- 155-162, Vol- 221, (2007), doi.org/10.1243/09544054JEM633, (Impact Factor: 2.6)

Publications from reputed conferences in special issues of International Journals

1. R. Kumar, D. Bombe, A. Agrawal, A data-driven ANN model for estimation of melt-pool characteristics in SLM process, Manufacturing Letters 35, (2023), 620–625. https://doi.org/10.1016/j.mfglet.2023.08.041. (Impact Factor: 3.9)

2. Mainak Pal, Hreetabh Kishore, Anupam Agrawal, Chandrakant K Nirala, (2022), "Fabrication of Precise Hemispherical End Tool for Micro Incremental Sheet Forming using Reverse-µEDM", Procedia CIRP, Volume 107, 2022, Pages 1600-1605 (2022), https://doi.org/10.1016/j.procir.2022.06.001. (Impact Factor: NA)

3. Kishore, H.; Nirala, C.K.; Agrawal, A. Laser Micromachining in Fabrication of Reverse-µEDM Tools for Producing Arrayed Protrusions. Micromachines 2022, 13, 306. https://doi.org/10.3390/mi13020306, (Impact Factor: 3.4)

4. H. Kishore, C.K. Nirala, A. Agrawal, (2019) “Modelling and Simulation Based Surface Characterization of Reverse-µEDM Fabricated Micro Pin-fins,” Procedia CIRP, pp 1230-1235, Vol. 81, (2019), https://doi.org/10.1016/j.procir.2019.03.299. (Impact Factor: NA)

5. H. S. Grewal, H. Singh, Anupam Agrawal, H. S. Arora, “Friction Stir Processing of Mild Steel to Enhance its Surface Hardness”, Advanced Materials Research, pp- 117-121, Vol- 620, (2013), doi.org/10.4028/www.scientific.net/AMR.620.117,  (Impact Factor: NA)

6. Grewal, H.S.,Arora, H.S., Agrawal, A., and Singh, H., Mukherjee, S., “Slurry erosion of thermal spray coatings: Effect of sand concentration”, Procedia Engineering, pp- 484-490, Vol. 68, (2013), https://doi.org/10.1016/j.proeng.2013.12.210, (Impact Factor: 2.15)

7. Grewal, H. S., Singh, H., Agrawal, A. and Arora, H. S., “Evaluation and development of economically viable coatings for erosion protection of hydroturbines”, Advanced Materials Research, pp. 590–594, Vol- 585, (2012), doi.org/10.4028/www.scientific.net/AMR.585.590 (Impact Factor: NA)

8. H S Grewal, H Singh, Anupam Agrawal “CFD Modeling for Evaluation of Slurry Erosion of Hydroturbine Materials”, International Journal of Advanced Mechatronics and Robotics, Vol. 3(2), 2012, pp. 61-70.

Conferences

Publications in proceedings of conferences held ABROAD

1. Pal, M., Pandya, V., Nirala C., K., and Agrawal, A., “Determining Critical Wall Angle in Micro-Incremental Sheet Forming of SS316L Foils for Formability Assessment”, 14th International Conference on Numerical Methods in Industrial Forming (NUMIFORM),  Krakow, Poland, June 25-29 2023.

2. Rakesh Kumar, Dattatraya Bombe, Anupam Agrawal, A Data-Driven ANN Model for Estimation of Melt-Pool characteristics in SLM Process, 51st SME North American Manufacturing Research Conference (NAMRC 51, 2023) held at Rutgers University, NJ, USA, June 12-16, 2023. 

3. Kumar N., Mahala M., Agrawal A., (2022) Experimental and Numerical Investigation of Heat Assisted Incremental Sheet Forming Process of Magnesium Alloy, ASME International Manufacturing Science and Engineering Conference (MSEC) 2022, June 27, 2022 – July 1, 2022 at Purdue University, USA 

4. Mainak Pal, Hreetabh Kishore, Anupam Agrawal, Chandrakant K Nirala, (2022) “Fabrication of Precise Hemispherical End Tool for Micro Incremental Sheet Forming using Reverse-µEDM”, 55th CIRP Conference on Manufacturing Systems-2022. (Switzerland 29th June- 1st July 2022).

5. Pal, M., Pandya, V., and Agrawal, A., “Study of Formability Limit Based on Ductile Damage Criteria of Incremental Sheet Forming of Titanium Grade 2 Sheet,” Proceedings of the ASME 16th International Manufacturing Science and Engineering Conference, MSEC 2021, June 21 – 25, 2021, Cincinnati, Ohio, USA, (2021).

6. Nandi, S. K., Kumar R., Anubhav, Agrawal, A., “Prediction of melt-pool characteristics in SLM process for Ti6Al4V using a semi-analytical model”, Proceedings of the ASME 16th International Manufacturing Science and Engineering Conference, MSEC 2021, June 21 – 25, 2021, Cincinnati, Ohio, USA. (2021).

7. Kishore, H, Banerjee, M, Rai, S, Kumar, R, Agrawal, A., “Experimental and Numerical Investigation on Micro Friction Stir Welding of Dissimilar Metal Joints”; Proceedings of the ASME 2020, 15th International Manufacturing Science and Engineering Conference (MSEC 2020), June 22 – 26, 2020, Cincinnati, Ohio, USA. Virtual, Online. September 3, 2020. V002T06A015. ASME. https://doi.org/10.1115/MSEC2020-8525.

8. Mahajan, P., Pal, M., Kumar, R., and Agrawal, A., “Experimental and Simulation Study of Incremental Forming for Titanium Grade 2 Sheet,” Proceedings of the ASME 2020, 15th International Manufacturing Science and Engineering Conference, MSEC 2020, June 22 – 26, 2020, Cincinnati, Ohio, USA, (2020).

9. Hreetabh Kishore, Chandrakant Kumar Nirala, Anupam Agrawal,  “Unconventional Shaped Micro Pin-fins for Electronic Cooling: A New Fabrication Approach,” 22 nd International Conference on Advances in Materials and Processing Technology (AMPT- 2019), Oct. 20-24, 2019, Taipei, Taiwan. (Presented by Mr. Hreetabh)

10. Rai, Saurabh, Rakesh Kumar, Harish Kumar Nirala, Kevin Francis, Anupam Agrawal, 2019, "Experimental and Simulation Study of Single Point Incremental Forming of Polycarbonate." In International Manufacturing Science and Engineering Conference, vol. 58752, p. V002T03A035. ASME, 2019. (Presented by Mr. Kevin)

11. Hreetabh Kishore, Rahul Nadda, Chandrakant K Nirala, Anupam Agrawal, Modelling and Simulation Based Surface Characterization of Reverse- µEDM Fabricated Micro Pin-fins, Procedia CIRP, Volume 81, 2019, Pages 1230-1235, https://doi.org/10.1016/j.procir.2019.03.299, 52nd CIRP Conference on Manufacturing Systems (CMS), Ljubljana, Slovenia, June 12-14, 2019.

12. Singh, A., Agrawal, A., “Numerical modeling and evaluations of residual stresses, deforming forces and geometrical inaccuracies in deformation machining process.” Advances in material processing conference, 2016, Kaula Lumper, Malaysia, (2016).

13. Singh, A., Nirala, H. K., Agrawal, A., “Investigations on Structural Thinning in Deformation Machining Stretching Mode.” 19th ESAFORM Conference on Material Forming. April 27-29, 2016, Nantes, France, (2016).

14. Singh A, Agrawal A. “Experimental Investigation on Elastic Spring Back in Deformation Machining Bending Mode.”  Proceedings of the 10th ASME 2015 Manufacturing Science and Engineering Conference, June 08-12, 2015, Charlotte, North Carolina, USA, (2015).

15. Agrawal, A., Reddy, N.V., Dixit, P.M., "Optimal Blank Shape Prediction considering Sheet Thickness Variation for Multistage Deep Drawing", Proceedings of the 10th ASME 2015 Manufacturing Science and Engineering Conference, June 08-12, 2015, Charlotte, North Carolina, USA. (2015).

16. H S Grewal, H Singh, Anupam Agrawal, S. Mukherjee “Slurry erosion of thermal spray coatings: Effect of sand concentration”, Malaysian International Tribology Conference, Kota Kinabalu, Sabah, Malaysia, 18-20 Nov. 2013.

17. H S Grewal, H Singh, Anupam Agrawal, “Understanding Liquid Impingement Erosion Behaviour of Nickel-Alumina Based Thermal Spray Coatings”, 19th Wear of Materials conference, Portland, Oregon, USA, 14-18 April 2013.

18. H. S. Grewal, H. Singh, Anupam Agrawal, H. S. Arora, “Friction Stir Processing of Mild Steel to Enhance its Surface Hardness”, International conference on X-Rays and Related Techniques in Research and Industry (ICXRI 2012), Organized by School of materials and Minerals Resources Engineering, Universiti Sains Malaysia, Malaysia, 3-5th July, 2012.

19. Grewal, H.S., Singh, H. and Agrawal, A., “Numerical simulation of erosion using computational fluid dynamics” Proc. 141th TMS Annual Meeting, Florida, USA, 11- 15 March 2012.

20. Anupam A., N Venkata Reddy, P. M. Dixit, Determination of Minimum Blankholding Pressure for Producing Wrinkle Free Products in Multistage Deep Drawing, Proceedings of the ASME 2011 International Manufacturing Science and Engineering Conference MSEC2011, June 13-17, 2011, Corvallis, Oregon, USA. (2011).

21. Agrawal, A., Ziegert, J., Smith, S., Woody, B., Cao, J., Comparison of Dimensional Repeatability of Deformation Machined Components with Sheet Metal Components, Transactions of NAMRI/SME, Volume 38, 2010, Pages 571-576 (North American Manufacturing Research Conference, NAMRC 38), (2010).

22. Agrawal, A., Reddy, N.V., Dixit, P.M., Determination of Optimum Process Parameters for Wrinkle Free Products in Deep Drawing Process, in 'Advances in Materials and Processing Technology' (AMPT 2006) Conference, Las Vegas, USA, during July 30- Aug.03, 2006)

Publications in proceedings of conferences held in INDIA

1. Harish K Nirala, Hreetabh Kishore, Anupam Agrawal, “ Effect of Nd- YAG LBμM process parameters on the surface characterization of fabricated micro components”, 20th ISME (Advancement in Mechanical Engineering) conference held at IIT Ropar, 19th -21st May, 2022.

2. Anubhav, Kumar, R., Nandi, S.K., Agrawal, A., Influence of build orientation on tensile and flexural strength of FDM fabricated ABS component, (AIMTDR-2021), PSG College of Technology Coimbatore, December 09-11, 2021.

3. H Kishore, V Sharma, J Airao, CK Nirala, A Agrawal, Introduction of a New Suction-based Dielectric Flushing in Reverse-μEDM, WCMNM2021, IIT Bombay, September 20-23,  2021.

4. Gupta, S., Agrawal, A., & Singla, E. “Dimensional Synthesis of an Upper-Limb Exoskeleton: A Hybrid Configuration”, International Symposium AIR 2019, IIT Madras, India-600036.

5. Gupta, S., Agrawal, A., & Singla, E. “Dimensional Synthesis and Modular Development of Upper-Arm Exoskeleton”, Indo- French Workshop on Robotics for Rehabilitation (Robo-Rehab 2019), CSIR-CSIO Chandigarh, Punjab, India. (Won best poster award)

6. H. Kishore, Shoaib Raza, C.K. Nirala, A. Agrawal, “Poster-I Hybrid μEDM-LASER Technology for Fabrication of Complex Shaped Arrayed Micro-structures” Poster II-“Process Development in μEDM using Hybrid Ultrasonic Vibration and Suction Technology” Participated and presented Poster at IESS-2019, Chennai Trade Center, Chennai, Tamilnadu, 14-16 March, 2019.

7. Pal, M., Mahajan, P., Athikkai, N., Rai, S., Kishore, H., Kumar, R., Agrawal, A., “Development of GUI and Comparison of Tool Path Strategies for Incremental Forming of Polycarbonate Sheet,” International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-11), IIT Indore, December 12-14, 2019.

8. Hreetabh Kishore, C.K. Nirala, A. Agrawal, “Characterization of LBM Fabricated Tool- plate for RµEDM”,  7th International conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019), IIT Ropar, 5-7th December 2019.

9. Gupta S., Gupta S., Agrawal A., Singla E., A Task-Based Dimensional Synthesis of an Upper-Limb Exoskeleton: A Hybrid Configuration. 4th International and 19th National Conference on Machines and Mechanisms, IIT Mandi, 5-7 December, 2019.

10. Hreetabh Kishore, Nirala C.K., Agrawal A., A New Approach for Fabrication of Complex-Shaped Arrayed Micro Electrodes. (AIMTDR-2018), Anna University, December 13-15 2018.

11. Y. Jain, S. Sharma, A. Agrawal, C. K. Nirala, “Mechanical Micro-Drilling and Micro-EDM-drilling: - A Comprehensive and Comparative Evaluation”, COPEN 2017, IIT Madras, December 7-9, 2017.

12. Harish K. Nirala, A. Agrawal, “Design and fabrication of electromagnetic fixture for incremental sheet metal forming”, COPEN 2017, IIT Madras, December 7-9, 2017.

13. Nirala, H.K., Agrawal, A., "Fractal geometry rooted incremental toolpath for Incremental Sheet Forming ", SMF 2016, IIT Bombay, December 7-9, 2016.

14. Nirala, H.K., Agrawal, A., “Approach for Prediction and Calculation of sheet thinning in Incremental Sheet Forming", (AIMTDR-2016), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, INDIA, (2016).

15. Singh, A., Nirala, H. K., Agrawal, A., “Metal forming research @ IIT Ropar.” International Forming Technology Exhibition (IMTEX Forming) Bengaluru, January 21-26, 2016. (Awarded first prize).

16. Singh A, Agrawal A., “Deformation Machining” Poster presented at International Symposium on Digital Fabrication, March 02-03, 2015, Indian Institute of Technology, Hyderabad. (2015).

17. Singh A, Agrawal A., “Comparison of Dimensional Repeatability and Accuracy for Deformation Machining Stretching Mode with Sheet Metal Components” at5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR) 2014, December 12-14, 2014, IIT Guwahati, (2014).

18. Singh A, Agrawal A., “Comparison of Deforming forces in Deformation Machined components with conventionally formed sheet metal components” at 23rd International Conference on Processing and Fabrication of Advanced Materials (PFAM), December 5-7, 2014, IIT Roorkee. (2014).

19. H S Grewal, Anupam Agrawal, H Singh, “Development of New Mathematical Model for Slurry Erosion Prediction”, Third Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), Organized by Department of Applied Mechanics, IIT Delhi, 5-12 December 2012.

20. H S Grewal, Anupam Agrawal, H Singh, H S Arora, “Cavitation Erosion Studies on Friction Stir Processed Hydroturbine Steel”, Fifth International Conference on Solidification Science and Processing, Organized by Indian Institute of Technology Bhubaneswar (ICSSP 2012), Bhubaneswar November 19- 20, 2012.

21. H S Grewal, H Singh, Anupam Agrawal, H S Arora, “Evaluation and Development of Economically viable coatings for Erosion Protection of Hydroturbines”, International Conference on Advances in Materials and Processing challenges and opportunities (AMPCO 2012), Organized by Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee,  Roorkee, 2–4 November 2012.

22. H S Grewal, H Singh, Anupam Agrawal “CFD Modeling for Evaluation of Slurry Erosion of Hydroturbine Materials”, at Proceedings of ‘National conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME 2011)’, October 7-8, 2011, held at Jalandhar, PB, India, pp. 415-420, (2011).

23. A. Agrawal, J. Ziegert, S. Smith, B. Woody, J, Fatigue Life Study of Deformation Machined Components,. Cao, Indo-Japan Seminar, IIT Delhi, New Delhi, March 21-25, 2011.