O. A. González-Estrada, “Inteligencia Artificial para la Gestión de la Investigación,” in Congreso de Ingeniería: Avances en Inteligencia Artificial y Tecnologías Emergentes, (Bucaramanga:UPB), Colombia, 2024.
Hernández-Salazar, C. A., Gonzalez-Estrada, O. A., and Villegas-Bermúdez, D. F. (2024). Characterization of Pig Vertebrae under Axial Compression: Integrating Radiomic Techniques andFinite Element Analysis for Accurate Diagnosis of Skeletal System Disorders., in 16th World Congress on Computational Mechanics WCCM, (Vancouver: IACM).
I. S. Medina-García et al., “Evaluation of the Compressive Strength of Bone Cements with Antibiotics,” in 6th Workshop on Modeling and Simulation for Science and Engineering, Medellín, Colombia, 2024.
C. A. Hernández-Salazar, J. D. Sierra-Villegas, and O. A. González-Estrada, “Assessing Perovskite Coating Using Artificial Intelligence to Enhance Solar Cell Efficiency,” in 6th Workshop on Modeling and Simulation for Science and Engineering, Medellín, Colombia, 2024.
S. Viancha, H. Bayona, and O. A. González-Estrada, “Topology Optimization and Additive Manufacturing of a Mcpherson Suspension Control Arm for a Combustion Vehicle Modified to Work with an Electric Motor,” in 6th Workshop on Modeling and Simulation for Science and Engineering, Medellín, Colombia, 2024.
C. A. Hernández-Salazar, J. D. Argüello, and O. A. González-Estrada, “Análisis del crecimiento de plántulas de Coffea Arabica mediante un sistema Farmbot,” in 3er Congreso Latinoamericano de Agricultura de Precisión (CLAP2024), Santo Domingo: ALAP, 2024.
H. D. Sánchez-Restrepo, C. A. Hernández-Salazar, and O. A. González-Estrada, “Metodología para la limpieza y clasificación de plantas en agricultura de precisión,” in 3er Congreso Latinoamericano de Agricultura de Precisión (CLAP2024), Santo Domingo: ALAP, 2024.
D. A. Plata, C. A. Hernández-Salazar, and O. A. González-Estrada, “Diseño experimental sobre las propiedades agronómicas en plántulas de Coffea arabica,” in 3er Congreso Latinoamericano de Agricultura de Precisión (CLAP2024), Santo Domingo: ALAP, 2024.
O. A. González-Estrada, C. M. Ruiz-Díaz, and B. Quispe, “Pattern Recognition of Two-Phase Flow in Vertical Pipes Using Artifical Intelligence Techniques,” in 7th International Meeting for Researchers in Materials and Plasma Technology, Cartagena de Indias, Colombia, 2023.
C. A. Hernández-Salazar, C. E. Chamorro-García, and O. A. González-Estrada, “Comparative Axial Compression Testing of Porcine Vertebrae by Laboratory Testing and Finite Element Analysis,” in 7th International Meeting for Researchers in Materials and Plasma Technology, Cartagena de Indias, Colombia, 2023.
C. A. Hernández-Salazar, D. F. Villegas-Bermúdez, and O. A. González-Estrada, “Characterization of Mechanical Properties of Porcine Bone Using Finite Element Models and Experimental Test,” in 7th International Meeting for Researchers in Materials and Plasma Technology, Cartagena de Indias, Colombia, 2023.
H. D. Sánchez-Restrepo, C. A. Hernández-Salazar, and O. A. González-Estrada, “Fatigue Behavior of Additive Manufacturing Composites Reinforced with Long Fibers Using Machine Learning,” in 7th International Meeting for Researchers in Materials and Plasma Technology, Cartagena de Indias, Colombia, 2023.
O. A. González-Estrada, C. A. Hernández-Salazar, and E. Lizarazo-Sánchez, “LSTM Networks To Predict Mechanical Behavior Of Additive Manufacturing Composites Reinforced With Carbon Fiber,” in 7th International Meeting for Researchers in Materials and Plasma Technology, Cartagena de Indias, Colombia, 2023.
J. M. Arenas, O. A. González-Estrada, “Estudio de los parámetros termodinámicos para el diseño y construcción de un sistema de almacenamiento de hidrógeno usando metales de transición,” in II Congreso Internacional en Ingeniería Ambiental, San José de Cúcuta, Colombia, 2023.
B. G. Quispe-Suarez, C. M. Ruiz-Diaz, O. A. González-Estrada, and M. M. Hernandez, “Identification of biphasic flow patterns made up of lubricating oil and water in vertical pipes applying artificial intelligence techniques,” in 9a Semana Internacional de Ciencia y Tecnología, Cucutá: Universidad Francisco de Paula Santander, 2022.
D. Castro, J. S. Melo-Reyes, O. A. González-Estrada, and A. Pertuz-Comas, “Evaluación De Las Propiedades Mecánicas De Un Material Compuesto De Fibras Naturales Y Resina En Base Natural,” in XV Congreso Iberoamericano de Ingeniería Mecánica, UPM, Ed., Madrid: FEIBIM, 2022, pp. 1–5.
C. A. Galán, J. E. Quiroga, O. A. González-Estrada, D. Y. Peña Ballesteros, and C. A. Acosta Minoli, “Dispersion curves for Lamb waves using analytical solutions and the Scaled-Boundary Finite Element Method,” in 20th International Conference on Fracture and Damage Mechanics, Málaga: Universidad de Sevilla, 2022.
O. A. González-Estrada, A. D. Pertuz Comas, and R. Ospina, “Characterization of hydroxyapatite coatings produced by pulsed-laser deposition on additive manufacturing Ti6Al4V ELI,” in 48th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, USA, 2022. doi: 10.1016/j.tsf.2022.139592.
I. Mantilla, O. A. González-Estrada, O. Bohórquez, and S. Casas, “Mechanical properties of polymer matrix composite materials produced by additive manufacturing through the finite element method.,” in East Europe Conference on AM materials, Belgrade, Serbia & online, 2021.
A. C. Paredes, J. León-Barrera, O. A. González-Estrada, O. Bohórquez, and A. Pertuz, “Numerical analysis of interlaminar tensile strength in fibre-reinforced AM composites,” in 1st Workshop on Structural Integrity of Additively Manufactured Materials, Timisora, Romania & online, 2021.
C. M. Ruiz-Diaz, M. M. Hernández-Cely, and O. A. González-Estrada, “Analysis of liquid-liquid (water and oil) two-phase flow in vertical pipes, applying artificial intelligence techniques,” in 5+1 6IMRMPT - International Meeting for Researchers in Materials and Plasma Technology, Medellín, jun, 2021.
R. Quiroga, O. A. González-Estrada, and G. González Silva, “Hydrodynamic cavitation of heavy crude oil in Vortex reactor using computational fluid dynamics,” in 5+1 6IMRMPT - International Meeting for Researchers in Materials and Plasma Technology, Medellín, jun, 2021.
J. D. Argüello-Plata, O. A. González-Estrada, and O. A. Gélvez-Arocha, “Numerical design of the filtering process of a matrix solid-phase dispersion based extraction plant using computational fluid dynamics and the discrete element method,” in 5+1 6IMRMPT - International Meeting for Researchers in Materials and Plasma Technology, Medellín, jun, 2021.
L. Lara-Ojeda, O. Bohórquez, and O. A. González-Estrada, “Numerical modeling of a domestic press for vegetable oil extraction using finite element analysis,” in 5+1 6IMRMPT - International Meeting for Researchers in Materials and Plasma Technology, Medellín, jun, 2021.
J. O. Paternina Baena, O. A. González Estrada, and D. F. Villegas, “Structural analysis of bone by segmentation and finite element analysis in patients with osteoporosis,” in 5+1 6IMRMPT - International Meeting for Researchers in Materials and Plasma Technology, Medellín, jun, 2021.
J. G. Díaz, J. S. León, O. A. González-Estrada, A. D. Pertuz, and M. Jaramillo, “Orthotropic Linear Elastic Model for Prediction of Mechanical Properties on Composites,” in Brazilian Conference on Composite Materials BCCM5, 2021, p. 9.
A. D. Pertuz-Comas, O. A. González-Estrada, and J. G. Díaz-Rodríguez, “Límite a fatiga de un material compuesto fabricado por impresión 3D,” in 5to Encuentro Internacional Universidad-Industria en el Sector de la Ingeniería EISI 2020, 2020.
J. S. León-Becerra, O. A. González-Estrada, W. Pinto-Hernández, A. D. Pertuz-Comas, and J. G. Díaz-Rodríguez, “Predicting mechanical properties in fiber reinforced composites produced by additive manufacturing,” in 7th International Conference Integrity-Reliability-Failure, IRF2020, 2020, p. 17248.
C. Díaz, O. A. González-Estrada, and M. Cely, “Predictive Modeling of Holdup in Horizontal Wateroil Flow Using a Neural Network Approach,” in 14th WCCM-ECCOMAS Congress 2020, 2021, pp. 1–6, doi: 10.23967/wccm-eccomas.2020.283.
J. S. León Becerra, O. A. González-Estrada, and L. Vásquez-Chaparro, “Predicting Mechanical Properties in Fiber Reinforced Composites Produced by Additive Manufacturing,” in International Mechanical Engineering Congress & Exposition, IMECE, 2020.
C. M. Ruiz-Diaz, M. M. Hernández-Cely, O. A. González-Estrada, G. González-Silva, and O. Hernández Rodríguez, “Modelo predictivo para el cálculo de la fracción volumétrica de un flujo bifásico agua- aceite en la horizontal utilizando una red neuronal artificial,” in XIV Congreso Internacional de Ingeniería Electrónica y Tecnologías Avanzadas, CIETA, 2020.
J. Gutiérrez-Gil, E. Nadal, O. M. León, O. A. González-Estrada, J. Albelda, and J. J. Rodenas, “Application of the Cartesian Grid Finite Element Method to image-based bone remodelling process,” in 5th ECCOMAS Young Investigators Conference, 2019, pp. 1–2.
I. Sierra-Nossa, O. Bohórquez, A. Pertuz, H. G. Sánchez-Acevedo, and O. A. González-Estrada, “Analysis of tensile mechanical properties of composite materials with continuous fiber produce by additive manufacturing under ISO and ASTM standards,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
H. G. Sánchez-Acevedo, G. H. Rodríguez, and O. A. González-Estrada, “Methodology based on cross modal strain energy method to estimate the damage severity in a metallic structure,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
H. F. Vega, O. Bohórquez, A. Pertuz, H. G. Sánchez-Acevedo, and O. A. González-Estrada, “Mechanical response to tensile stress of a composite material reinforced with sugar cane fibers,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
R. A. Pinto-Flórez, O. Bohórquez, L. Vasquez, A. Pertuz, and O. A. González-Estrada, “Determination of the interlaminar tensile strength of the African palm oil bunches rachis fibers composite and epoxy matrix,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
A. Casas, O. Bohórquez, J. Quiroga, A. Pertuz, and O. A. González-Estrada, “Adhesive joints for composite materials produced by additive manufacturing,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
P. A. Chacón-Santamaría, A. Sierra, and O. A. González-Estrada, “Shape optimization of a control arm produced by additive manufacturing with fibre reinforcement,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
L. Ángulo-Poveda, O. Bohórquez, A. Pertuz, Y. Rueda, and O. A. González-Estrada, “Mechanical characterization of the rachis fiber obtained from the African palm elaeis guineensis,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
A. Paredes, O. Bohórquez, A. Pertuz, Y. Rueda, and O. A. González-Estrada, “Interlaminar tensile strength for composite materials made by additive manufacturing,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
L. Galvis, J. Quiroga, and O. A. González-Estrada, “Numerical modelling of guided waves dispersion curves in an aluminium flat plate by finite element analysis,” in 5th International Meeting for Researchers in Materials and Plasma Technology, 2019.
O. A. González-Estrada, S. A. Ardila, and J. J. Ródenas, “Evaluación de daño en tejido óseo afectado por metástasis mediante técnicas de segmentación y elementos finitos,” in 19° Congreso Internacional de Metalurgia y Materiales , CONAMET-SAM, 2019.
M. A. Rojas, G. González-Silva, L. Vásquez-Chaparro, and O. A. González-Estrada, “Estudio fluidodinámico de un crudo pesado colombiano en función de la temperatura de entrada en un reactor vortex de cavitación hidrodinámica mediante dinámica de fluidos computacional,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 2019, 2019.
O. León, J. Gutierrez-Gil, E. Nadal, O. A. González-Estrada, J. Albelda, and J. J. Ródenas, “Simulación numérica del proceso de remodelación ósea mediante la técnica cgFEM a partir de imágenes médicas,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 20192, 2019, p. 1.
O. Bohórquez, L. Poveda, A. D. Pertuz-Comas, and O. A. González-Estrada, “Caracterización de material compuesto con matriz epóxica y refuerzo orgánico proveniente del raquis de la palma de aceite utilizando modelos numéricos y experimentales,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 20192, 2019, p. 1.
D. Argüello and O. A. González-Estrada, “Finite element analysis of a segmented vertebra in open-source software 3D Slicer for damage characterization,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 20192, 2019, p. 1.
S. Peña, O. Bohórquez, J. S. León, L. Vásquez-Chaparro, and O. A. González-Estrada, “Daño progresivo en tuberías de material compuesto tejido mediante elementos finitos,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 2019, 2019.
J. Paternina, D. Villegas-Bermudez, and O. A. González-Estrada, “Análisis estructural del hueso mediante segmentación y elementos finitos en pacientes con osteoporosis,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 2019, 2019.
A. Paredes, J. S. León, L. Vásquez-Chaparro, O. A. González-Estrada, and O. Bohórquez, “Análisis del esfuerzo normal interlaminar en piezas elaboradas mediante manufactura aditiva,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 2019, 2019.
J. S. León, O. A. González-Estrada, and A. Pertuz, “Mechanical characterization of additive manufacturing composite parts,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 2019, 2019.
E. Corredor, O. A. González-Estrada, O. Bohórquez, and J. Rojas, “Influence of surface geometric parameters on adhesive joints for substrates made with additive manufacture using numerical methods,” in XIV Congreso Iberoamericano de Ingeniería Mecánica - CIBIM 2019, 2019.
O. A. González-Estrada, S. Natarajan, and J. J. Ródenas, “Error Indicator for Polygonal Finite Element Meshes in 3D,” in 13th World Congress in Computational Mechanics WCCM, 2018.
R. Castilla, L. Forero, and O. A. González-Estrada, “Comparative study of the influence of dental implant design on the stress and strain distribution using the finite element method,” in International Science Week: Challenges of Science in the 21st Century, 2018.
S. A. Ardila, O. A. González-Estrada, and J. Quiroga, “Damage Assessment of Spinal Bones Due to Prostate Cancer,” in 17th International Conference on Fracture and Damage Mechanics, 2018.
O. A. González-Estrada, J. Quiroga, and G. Díaz, “Mechanical Response and Damage of Woven Composite Materials Reinforced with Fique,” in 17th International Conference on Fracture and Damage Mechanics, 2018.
J. León, O. A. González-Estrada, and A. Pertuz, “Damage in fiberglass composite laminates used for pipes,” in 17th International Conference on Fracture and Damage Mechanics, 2018.
J. Quiroga, O. A. González-Estrada, and J. Quiroga Pineda, “Theoretical Sensibility Analysis of the Guided Wave T(0,1) Velocity to the Stress in Stressed Cylinders,” in 17th International Conference on Fracture and Damage Mechanics, 2018.
J. Quiroga, O. A. González-Estrada, and J. Quiroga Pineda, “Stressed Cylinder Dispersion Curves Based on Effective Elastic Constants and SAFE Method,” in 17th International Conference on Fracture and Damage Mechanics, 2018.
O. A. González-Estrada, A. Pertuz, and J. Quiroga, “Evaluation of Tensile Properties and Damage of Continuous Fibre Reinforced 3D Printed Parts,” in 17th International Conference on Fracture and Damage Mechanics, 2018.
O. M. León Uribe, J. J. Rodenas, E. Nadal, O. A. González-Estrada, and J. M. Navarro, “Estudio del remodelado óseo mediante elementos finitos de mallas cartesianas (cgFEM),” in VIII Reunión del Capítulo Español de la Sociedad Europea de Biomecánica (ESB), 2018.
J. Rojas, E. Corredor, O. A. González-Estrada, and N. Ordoñez, “Methodological study for fatigue analysis of glass reinforced epoxi pipe,” in 18 Congreso Internacional de Metalurgia y Materiales SAM-CONAMET, 2018.
K. Molina, D. Ortega, O. A. González-Estrada, and M. del J. Martínez, “Optimización de la potencia de una turbina eólica tipo hawt a partir de la geometría de su álabe,” in Conferencia Internacional de Energía Sostenible, 2017.
J. S. Leon Becerra and O. A. González-Estrada, “Modelado del daño en tuberías de material compuesto de fibras longitudinales,” in 13o Congreso Ibero-americano de Ingeniería Mecánica, CIBEM 2017, 2017.
K. Molina, D. Ortega, M. Martínez, and O. A. González-Estrada, “Modelado de la interacción fluido estructura (FSI) para el diseño de una turbina eólica Hawt,” in XI Congreso Colombiano de Métodos Numéricos, 2017, p. 1.
W. M. Salamanca, S. Medina, and O. A. González-Estrada, “Análisis del efecto de la corrosión tipo picadura en los esfuerzos de una tubería para transporte de hidrocarburos utilizando el software de simulación Ansys,” in XI Congreso Colombiano de Métodos Numéricos, 2017, pp. 1–12.
J. J. Gutiérrez, I. Díaz, and O. A. González-Estrada, “Análisis de los esfuerzos y las deflexiones causados por la interacción fluido estructura en los álabes de un impulsor centrífugo,” in XI Congreso Colombiano de Métodos Numéricos2, Bucaramanga: Universidad Industrial de Santander, 2017.
J. S. León Becerra, O. A. González-Estrada, and A. D. Pertuz Comas, “Damage evolution in composite pipes using a continuum damage mechanics formulation,” in Congreso de Métodos Numéricos en Ingeniería CMN2017, 2017, p. 1.
O. A. González-Estrada, J. S. León Becerra, and A. D. Pertuz Comas, “Estudio del comportamiento mecánico de tuberías de material compuesto para el transporte de hidrocarburos por elementos finitos,” in Congreso de Métodos Numéricos en Ingeniería CMN2017, 2017, p. 1.
J. S. León Becerra, O. A. González-Estrada, and A. Pertuz, “Stress analysis , first ply failure and damage of a multilayer composite pipe for different boundary conditions,” in ESSS Convergence Colombia 2017, 2017, p. 1.
J. S. León Becerra, O. A. González-Estrada, and A. D. Pertuz Comas, “Damage evolution in composite pipes using a continuum damage mechanics formulation,” in V International Conference on Computational Modeling of Fracture and Failure of Materials and Structures - CFRAC 2017, 2017, p. 276.
J. M. Díaz, O. A. González-Estrada, and C. I. López, “Biomechanical analysis of a cranial Patient Specific Implant on the interface with the bone using the Finite Element Method,” in VII Latin American Congress on Biomedical Engineering CLAIB 2016, Bucaramanga, Santander, Colombia, October 26th -28th, 2016, I. Torres, J. Bustamante, and D. A. Sierra, Eds. Bucaramanga: Springer Singapore, 2017, pp. 405–408.
González-Estrada, O. A., León Uribe, O. M., Natarajan, S., Ródenas, J. J., & Bordas, S. P. A. (2016). Adaptivity and Error Control for the Polygonal Finite Element Using Recovery-based Error Estimates. 12th World Conference on Computational Mechanics, WCCM XII(1)
González-Estrada, O. A., Natarajan. S., Ródenas, J. J., Bordas, S. P. A.,Heaney, C. Recovery based error estimation for the polygonal finite element method for smooth and singular linear elasticity. (2014). 11th World Congress on Computational Mechanics (WCCM 2014), Barcelona, Spain. CINME.
Nadal, E., Moitinho de Almeida, J.P. , Ródenas, J. J., Fuenmayor, F. J., González-Estrada, O. A. Fully equilibrated stress recovered field for error bounding. In J.P. Moitinho de Almeida, P. Díez, C. Tiago, N. Pares (Eds.), Adaptive Modeling and Simulation. Proceedings of VI ADMOS 2013. Lisbon: CINME.
Ródenas, J. J., Nadal, E., González-Estrada, O. A., Fuenmayor, F. J., Bordas, S.P.A., Kerfriden, P. Explicit expressions of dual loads for accurate error estimation and bounding in goal oriented adaptivity. In J.P. Moitinho de Almeida, P. Díez, C. Tiago, N. Pares (Eds.), Adaptive Modeling and Simulation. Proceedings of VI ADMOS 2013. Lisbon: CINME.
González-Estrada, O. A., Nadal, E., Ródenas, J. J., Kerfriden, P., Bordas, S. P. A., & Fuenmayor, F. J. (2013). On a nearly equilibrated recovery technique based on displacements for error estimation and error bounding. In A. S. Osman, W. M. Coombs, & T. Koziara (Eds.), CM13: Proceedings of the International Conference on Computational Mechanics (pp. 25–27). Durham: University of Durham, School of Engineering.
Nadal, E., González-Estrada, O. A., Ródenas, J. J., Bordas, S. P. A., & Fuenmayor, F. J. (2012). Error estimation and bounding in energy norm based on a displacement recovery technique. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 253). Vienna, Austria: TU Wien.
Nadal, E., González-Estrada, O. A., Ródenas, J. J., Bordas, S. P. A., & Fuenmayor, F. J. (2012). Error estimation and error bounding in quantities of interest based on equilibrated recovered displacement fields. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)2 (p. 254). Vienna, Austria: TU Wien.
Ródenas, J. J., Nadal, E., González-Estrada, O. A., Fuenmayor, F. J., Bordas, S. P. A., & Kerfriden, P. (2012). Error estimation of recovered solutions in FE analysis. Higher order h-adaptive refinement strategies. In P. M. Pimienta (Ed.), 10th World Congress on Computational Mechanics (WCCM 2012). Sao Paulo, Brazil: Escola Politécnica. Universidade de Sao Paulo.
Nadal, E., González-Estrada, O. A., Ródenas, J. J., Kerfriden, P., Bordas, S. P. A., & Fuenmayor, F. J. (2012). Practical error bounds in energy norm based on a recovered displacement field. In P. M. Pimienta (Ed.), 10th World Congress on Computational Mechanics (WCCM 2012). Sao Paulo, Brazil: Escola Politécnica. Universidade de Sao Paulo.
Nadal, E., González-Estrada, O. A., Ródenas, J. J., Kerfriden, P., Bordas, S. P. A., & Fuenmayor, F. J. (2012). Accurate error estimate in energy norm using a nearly-equilibrated kinematically-admissible displacement recovery technique. In P. M. Pimienta (Ed.), 10th World Congress on Computational Mechanics (WCCM 2012). Sao Paulo, Brazil: Escola Politécnica. Universidade de Sao Paulo.
González-Estrada OA, Nadal E, Ródenas JJ, Kerfriden P, Bordas SPA. Error estimation in quantities of interest for XFEM using recovery techniques. In: Yang ZJ, ed. 20th UK National Conference of the Association for Computational Mechanics in Engineering (ACME). Manchester: The University of Manchester; 2012:333-336.
Ródenas, J. J., González-Estrada, O. A., Fuenmayor, F. J., Nadal, E., Bordas, S. P. A. (2011). On the use of recovery techniques for accurate error estimation and error bounding in XFEM. In S. P. A. Bordas & P. Kerfriden (Eds.), 2nd International Conference on the Extended Finite Element Method (p. 116). Cardiff, UK: Cardiff University.
González-Estrada, O. A., Ródenas, J. J., Nadal, E., Bordas, S. P. A., Kerfriden, P. (2011). Accurate evaluation of K in XFEM using error estimation in quantities of interest based on equilibrated recovery. In S. P. A. Bordas & P. Kerfriden (Eds.), 2nd International Conference on the Extended Finite Element Method (p. 61). Cardiff, UK: Cardiff University.
Nadal, E., Ródenas, J. J., González-Estrada, O. A., Bordas, S. P. A., Kerfriden, P. (2011). Estimación precisa del error en magnitudes de interés mediante técnicas de recovery con equilibrio local. Congress on Numerical Methods in Engineering. Coimbra, Portugal.
González-Estrada, O. A., Ródenas, J. J., Fuenmayor, F. J., Chinesta, F. (2011). Exact satisfaction of boundary equilibrium to obtain upper error bounds in energy norm using MLS recovery techniques. In D. Aubry, P. Díez, B. Tie, & N. Parés (Eds.), Adaptive Modeling and Simulation. Proceedings of V ADMOS 2011. Paris: CINME.
González-Estrada, O. A., Ródenas, J. J., Nadal, E., Bordas, S. P. A., Kerfriden, P. (2011). Equilibrated patch recovery for accurate evaluation of upper error bounds in quantities of interest. In D. Aubry, P. Díez, B. Tie, & N. Parés (Eds.), Adaptive Modeling and Simulation. Proceedings of V ADMOS 2011. Paris: CINME.
González-Estrada, O. A., Ródenas, J. J., Bordas, S. P. A., Nadal, E., Kerfriden, P., Duflot, M. (2011). Accurate evaluation of stress intensity factors using error estimation in quantities of interest based on equilibrated recovery. In J. Oliver, M. Jirasek, O. Allix, & N. Moës (Eds.), Computational Modeling of Fracture and Failure of Materials and Structures. Proceedings of CFRAC 2011. Barcelona, Spain: CINME.
González-Estrada, O. A., Ródenas, J. J., Bordas, S. P. A., Kerfriden, P. (2011). Enhanced recovery techniques for accurate evaluation of error estimates in FE aproximations. In O. Laghrouche, A. El Kacimi, P. Woodwaed, & G. Medero (Eds.), 19th UK National Conference of the Association for Computational Mechanics in Engineering (pp. 253-256). Edinburgh: Heriot-Watt University.
Ródenas JJ, González-Estrada OA, Fuenmayor FJ, Chinesta F. Upper bounds of the error in X-FEM based on a moving least squares (MLS) recovery technique, In 9th. World Congress on Computational Mechanics (WCCM9). 4th. Asian Pacific Congress on Computational Methods (APCOM2010), Khalili N, Valliappan S, Li Q, Russell A(eds). Centre for Infrastructure Engineering and Safety: Sydney, Australia, 2010.
González-Estrada OA, Natarajan S, Bordas SPA, Ródenas JJ. Recovery-based error control in the finite element method with strain smoothing, In 9th. World Congress on Computational Mechanics (WCCM9). 4th. Asian Pacific Congress on Computational Methods (APCOM2010), Khalili N, Valliappan S, Li Q, Russell A(eds). Centre for Infrastructure Engineering and Safety: Sydney, Australia, 2010.
Ródenas JJ, González-Estrada OA, Fuenmayor FJ, Chinesta F. Accurate upper bound of the error in the Finite Element Method using an equilibrated moving least squares recovery technique. ADMOS 2009. IV International Conference on Adaptive Modeling and Simulation. Bruxelles, 2009.
Ródenas JJ, Moitinho de Almeida JP, Díez P, González-Estrada OA, Almeida Pereira OJB. A comparison of different finite element error bounding techniques for plane elasticity. Congreso de Métodos Numéricos en Ingeniería. Barcelona, 2009.
Ródenas JJ, González-Estrada OA, Fuenmayor FJ, Chinesta F. Two recovery based error estimators for the evaluation of sharp upper bounds of the error in FEM and X-FEM. XFEM 2009. Proceedings of the International Conference on Extended Finite Element Methods - Recent Developments and Applications. Aachen, 2009.
Ródenas JJ, Díez P, González-Estrada OA, Fuenmayor FJ. Accurate upper bound of the discretization error in XFEM through a recovery-based technique and error estimation of the recovered solution, In 8th.World Congress on Computational Mechanics (WCCM8).5th.European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Schrefler BA, Perego U(eds). CINME: 2008.
Ródenas JJ, Duflot M, Bordas S, Giner E, González-Estrada OA, Fuenmayor FJ. Comparison of recently developed recovery type discretization error estimators for the extended finite element method, In 8th World Congress on Computational Mechanics (WCCM8). 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Schrefler BA, Perego U(eds). CINME: 2008.
Ródenas JJ, Giner E, Fuenmayor FJ, González-Estrada OA. Accurate recovery-type error estimation for linear elastic fracture mechanics in FEM and X-FEM based on a singular+smooth field splitting, In International Conference on Adaptive Modeling and Simulation. ADMOS 2007, International Centre for Numerical Methods in Engineering (CIMNE): 2007. 202-205.
Ródenas, J. J., González, O. A., Díez, P., Fuenmayor, F. J. Upper bounds of the error in the extended finite element method by using an equilibrated-stress patch recovery technique. In International Conference on Adaptive Modelling and Simulation. ADMOS 2007, pp. 210-213. International Centre for Numerical Methods in Engineering (CIMNE): 2007. 210-213.
Giner, E., Vercher, A., González, O. A., Tarancón, J. E., Fuenmayor, F. J. Crack growth in fretting-fatigue problems using the extended finite element method. In III European Conference on Computational Mechanics, C.A.Mota Soares et al, ed., Springer: 2006.
Ródenas JJ, Giner E, Tarancón JE, González OA. A recovery error estimator for singular problems using singular+smooth field splitting, In Fifth International Conference on Engineering Computational Technology, Topping BHV, Montero G, Montenegro R(eds). Civil-Comp Press: Stirling, Scotland, 2006.
Giner E, Vercher A, Tarancón JE, González OA, Fuenmayor FJ. Análisis mediante X-FEM de la orientación de grieta en un problema de fretting-fatiga con contacto completo, In XXIII Encuentro Del Grupo Español De Fractura, Grupo Español de Fractura: 2006. 141-146.
Fuenmayor FJ, González OA, Carballeira J, Giner E. Influencia de la integración numérica en la extracción del FIT mediante el método de los elementos finitos extendido, In XXI Encuentro Del Grupo Español De Fractura, Grupo Español de Fractura: 2004. 59-64.