Selected Publications
16. Ranu, and Pankaj B. Agarwal, Finite element simulation-based prediction of CMOS-compatible pyroelectric material in MEMS IR detectors, Microelectronics Reliability, Volume 147, pp. 115076, 2023. DOI
15. Uthra B, Ranu, Md. Ataur Rahman, Sharath Sriram, and Pankaj B. Agarwal, Infrared Non-Invasive Exhaled Biomarker Sensing: A Review, Advanced Sensor Research, First published: 07 September 2023. DOI
14. Uthra B, Vedant Bang, S.S.V. Anantha, and Pankaj B. Agarwal, Effect of lanthanide dopants on stability of orthorhombic hafnium oxide for pyroelectric applications, Materials Letters, Volume 317, pp. 132097, 2022. DOI
13. Parul Singh, Kanhaya Sharma, Ivan Puchades, and Pankaj B. Agarwal, A Comprehensive Review on MEMS-based Viscometers, Sensors and Actuators A: Physical (Elsevier), Volume 338, Pages 113456, 2022. DOI
12. Ranu, Uthra B, Rahul Sinha, and Pankaj B. Agarwal, CMOS Compatible Pyroelectric Materials for Infrared Detectors, Materials Science in Semiconductor Processing, Volume 140, pp. 106375, 2022. DOI
11. Pankaj B. Agarwal, Prathana Paulchowdhury, Arnab Mukherjee, Piyush Lohani, and Navneet KumarThakur, Optimization of oxygen plasma based etching of single layered graphene through Raman and FESEM characterization, Materials Today: Proceedings, 2021. DOI
10. Pankaj B. Agarwal, Sk. Masiul Islam, Ravi Agarwal, Nitin Kumar, and Avshish Kumar, “Carbon Nanotube Alignment Techniques and Their Sensing Applications,” in Carbon Nanomaterial Electronics: Devices and Applications, A. Hazra and R. Goswami, Eds. Springer Nature Switzerland, 2021, pp. 307–348. DOI
9. Pankaj B. Agarwal, Navneet Kumar Thakur, Rishi Sharma, Parul Singh, Joshy Joseph and Chaturvedula Tripura, Chemical-free and scalable process for the fabrication of a uniform array of liquid-gated CNTFET, evaluated by KCl electrolyte, Scientific Reports, 11, Article number: 3979, 2021. DOI
8. Pankaj B. Agarwal, Rishi Sharma, Dharmesh Mishra, Navneet K Thakur, Ajay Agarwal, and Ayyappanpillai Ajayaghosh, Silicon Shadow Mask Technology for Aligning and In Situ Sorting of Semiconducting SWNTs for Sensitivity Enhancement: A Case Study of NO2 Gas Sensor, ACS Applied Materials & Interfaces (ACS), Volume 12, Number 36, Page 40901-9, 2020. DOI
7. Pankaj B. Agarwal, Deepak Kumar Panwar, Bijendra Kumar, and Ajay Agarwal, A novel shadow mask aligner based on three points levelling for wedge error compensation, Engineering Research Express (IOP), Volume 2, Number 1, Page 015034, 2020. DOI
6. Pankaj B. Agarwal, Bayazeed Alam, Daya Shankar Sharma, Sumit Sharma, Soumen Mandal, and Ajay Agarwal, Flexible NO2 gas sensor based on single-walled carbon nanotubes on polytetrafluoroethylene substrates, Flexible and Printed Electronics (IOP), Volume 3, Number 3, Page 035001, September 2018. DOI
5. Pankaj B. Agarwal, Shuvam Pawar, Suman M. Reddy, Prabhash Mishra, and Ajay Agarwal, Reusable silicon shadow mask with sub-5 μm gap for low cost patterning, Sensors and Actuators A: Physical (Elsevier), Volume 242, Pages 67-72, May 2016. DOI
4. Monika Poonia, V. Manjuladevi, R. K. Gupta, Sanjeev K. Gupta, Jitendra Singh, Pankaj B. Agarwal, and Jamil Akhtar, “Ultrathin Films of Single-Walled Carbon Nanotubes: A Potential Methane Gas Sensor”, Science of Advanced Materials, Volume 6, Pages 1–8, 2014. DOI
3. William R. Taube, A. Kumar, R. Saravanan, Pankaj B. Agarwal, P. Kothari, B. C. Joshi and D.Kumar, "Efficiency Enhancement of Silicon Solar Cells with Silicon Nanocrystals Embedded in PECVD Silicon Nitride Matrix", Solar Energy Materials and Solar Cells (Elsevier), Volume 101, Pages 32-35, June 2012. DOI
2. Pankaj B. Agarwal and A.Kumar, "Design and Simulation of Octal-to-Binary Encoder using Capacitive Single-Electron Transistors (C-SETs)", Microelectronics Journal (Elsevier), Volume 42, Number 1, Pages 96-100, January 2011. DOI
1. Pankaj B. Agarwal, A. Kumar, Saravanan R., A. K. Sharma and Chandra Shekhar, "Nano-arrays of SAM by Dip-Pen Nanowriting (DPN) Technique for Futuristic Bio-electronic and Bio-sensor Applications", Thin Solid Films (Elsevier), Volume 519, Issue 3, Pages 1025-1027, November 2010. DOI
International Journal: Other Publications
11. Souvik Paul, Saswata Mukhopadhyay, Soumen Mandal, Pankaj B. Agarwal, Fabrication of durable hemophobic surfaces on cast acrylic sheets using UV laser micromachining, Micro & Nano Letters, Volume 14, Issue 11, Page 1175-1177, 2019. DOI
10. Anju Yadav, Ajay Agarwal, Pankaj B. Agarwal and Parveen Saini, Ammonia Sensing by PANI-DBSA Based Gas Sensor exploiting Kelvin Probe Technique, Journal of Nanoparticles, Volume 2015 (2015) Article ID 842536, 6 pages. DOI
9. S. Mandal, R.K. Arun, N. Chanda, Nagahanumaiah, S. Das, Pankaj B. Agarwal, J. Akhtar, P. Mishra, Silver nanoparticles in comparison with ionic liquid and rGO as gate dopants for paper pencil based field effect transistors, Journal of electronic materials, Springer, Volume 44, Issue 1, Pages 6-12, January 2015. DOI
8. Bala Sekhar Dasari, William R. Taube, Pankaj B. Agarwal, Mayank Rajput, Anil Kumar, Jamil Akhtar, Room Temperature Single Walled Carbon Nanotubes (SWCNT) Chemiresistive Ammonia Gas Sensor, Sensors & Transducers Journal, Vol. 190, Issue 7, pp. 24-30, July 2015. PDF
7. Sudhir Kumar Saini, Amit Vishwakarma, Pankaj B. Agarwal, Bala Pesala, and Ajay Agarwal, "Large area nano-patterning /writing on gold substrate using dip-pen nanolithography (DPN)", AIP Conference Proceedings 1620, 554, 2014. PDF
6. Pankaj B. Agarwal, Smriti Sahu, Pooja Kapse and Sanjeev Kumar Gupta, “Positioning of CNTs over the Gold Substrate via Self-assembled Monolayer Functionalization using Dip-pen Nanowriting”, SPIE Proceedings, 2012 Conference Volume 8549. DOI
5. Rahul Prajesh, Pankaj B. Agarwal and Ajay Agarwal, "Reliability Analysis of CNT Contacts with Metal Electrodes", BioNanoScience (SpringerLink), Volume 2, Issue 4, Pages 223-226, December 2012. DOI
4. A. Kumar, Pankaj B. Agarwal, S. K. Gupta, A. K. Sharma, D. Kumar and Chandra Shekhar, “Fabication of Low-Roughness Au/Ti/SiO2/Si Substrates for Nanopatterning of 16-Mercaptohexadecanoic Acid (MHA) by Dip-Pen-Nanolithography”, Journal of Nano- and Electronic Physics, Volume 4, Number 2, Pages 02022-1-4, June 2012. PDF
3. A. Kumar, William R. Taube, R. Saravanan, Pankaj B. Agarwal, P. Kothari, and D.Kumar, " Plasma enhanced chemical vapor deposited (PECVD) silicon-rich-nitride thin films for improving silicon solar cells efficiency", Int. J. Sci. Eng. Technol, Volume 1, Issue 4, Pages 111-116, 2012. PDF
2. A. Kumar, Pankaj B. Agarwal, Sumit Sharma and D. Kumar, “Nano-scale Patterning of Silicon Nanoparticles on Silicon Substrate by Dip-Pen-Nanolithography”, Journal of Nano- and Electronic Physics, Volume 3, Number 1, Part 1, Pages 127-131, March 2011. PDF
1. A. Kumar, Pankaj B. Agarwal, Sachin Kumar, B. C. Joshi, A. K. Sharma, and H. Chander, “Low-pressure Chemical Vapour Deposition of Silicon Nanoparticles: Synthesis and Characterisation” Defence Science Journal, Volume 58, Number 4, Pages 550-558, July 2008. PDF
International Conferences: (33)
34. Ranu, and Pankaj B. Agarwal, "Finite Element Simulation for Thermal Analysis of AlN Pyroelectric MEMS Infrared Detector" presented at IUMRS-ICA 2022, organized by IIT, Jodhpur, 19-23 December 2022.
33. Navneet Kumar Thakur, T. Eshwar, and Pankaj B. Agarwal, "Deposition of Uniform SWNTs Thin Film using In-house Developed Spray Coating Set-up", presented at Symposium on Carbon Nanomaterial Electronics (SCNE) – 2019, BITS Pilani, 7th-8th November 2019.
32. Pankaj B. Agarwal, Prathana Paulchowdhury, Arnab Mukherjee, Piyush Lohani, and Navneet Kumar Thakur, "Optimization of Oxygen Plasma based Etching of Single Layered Graphene through Raman and FESEM Characterization", presented at International Conference on Advances in Nanomaterials and Devices for Energy and Environment (ICAN) – 2019, IIITM Gwalior, 27th-29th January 2019.
31. Pankaj B. Agarwal, Sami Ullha and Sumit Sharma, “Functionalized Graphene for NO2 Sensing: Kelvin Probe based Contact Potential Difference (CPD) Measurements", presented at 19th International Workshop on Physics of Semiconductor Devices (IWPSD) – 2017, IIT Delhi, 11th-15th December 2017.
30. Pankaj B. Agarwal, Anant Kumar Singh, and Ajay Agarwal, “Stable Metal-CNT Contacts using Shadow Mask Technique for CNTFET Fabrication", presented at International Conference on Emerging Technologies : Micro to Nano 2017 (ETMN-2017), Solapur University, Solapur, 06th -07th October 2017.
29. Jyoti, Khushbu, Daya Shankar Sharma, Mandeep K, Bairwa, T. Eshwar, Pankaj B. Agarwal, Prateek Kothari, Arvind K Singh, and Anil Kumar, “Single Wall Carbon Nanotubes (SWCNTs) NO2 Gas Sensor", presented at International Conference on Advances in Nanomaterials and Nanotechnology 2016 (ICANN-2016), Jamia Millia Islamia, Delhi, 4th -5th November 2016.
28. Komal, Animesh Bhowal, Prateek Kothari and Pankaj B. Agarwal, “Functionalization of Single Wall Carbon Nanotubes using Oxygen Plasma", presented at International Conference on Advances in Nanomaterials and Nanotechnology 2016 (ICANN-2016), Jamia Millia Islamia, Delhi, 4th -5th November 2016.
27. Md. Bayazeed Alam, Daya Shankar Sharma, M. M. Malik and Pankaj B. Agarwal, “A Flexible and Low Cost Pristine Single Walled CNTs based Ammonia Sensor", presented at International Conference on Advances in Nanomaterials and Nanotechnology 2016 (ICANN-2016), Jamia Millia Islamia, Delhi, 4th -5th November 2016.
26. Md. Bayazeed Alam, Sudhir Kumar Saini, Daya Shankar Sharma, and Pankaj B. Agarwal, “Pristine Carbon Nanotubes based Resistive Temperature", presented at International Conference on Emerging Technologies : Micro to Nano 2015 (ETMN-2015), Manipal University, Jaipur, 24th -25th October 2015.
25. Amit Kumar Goyal, Hemant Shankr Dutta, Pankaj B. Agarwal, and Suchandan Pal, “Realization of Rod-type Photonic Crystal Structure for Optical Sensing using Dip-Pen Nano-lithography”, presented at 12th International Conference on Fiber Optics and Photonics, Indian Institute of Technology Kharagpur India 13-16 December, 2014.
24. Sudhir Kumar Saini, Amen E, Rahul Raj, Pankaj B. Agarwal, Bala Pesala, and Ajay Agarwal, “Color Shifting Properties of 1D Gold Gratings Fabricated using Dip Pen Nanolithography”, presented at 12th International Conference on Fiber Optics and Photonics, Indian Institute of Technology Kharagpur India, 13-16 December, 2014.
23. Pankaj B. Agarwal, Shuvam Pawar, Ajay Agarwal, Ayyappanpillai Ajayaghosh, "Design and Fabrication of Silicon Shadow Mask Using Bulk Micro-Machining", Presented at Seventh ISSS International Conference on Smart Materials Structures and Systems (ISSS-2014), Indian Institute of Science, Bangalore, 08th-11th July 2014.
22. Sudhir Kumar Saini, Amit Vishwakarma, Pankaj B. Agarwal, Bala Pesala and Ajay Agarwal, "Large Area Nano-Patterning /Writing on Gold Substrate Using Dip-Pen Nanolithography (DPN)", Presented at International Conference on Light: Optics-14, National Institute of Technolgy, Calicut, 19th-21st March 2014.
21. Parul Girdher, Amit Vishwakarma, Arvind Singh and Pankaj B. Agarwal, "Fabrication of Nano-dimensional Gold Line Patterns using Dip-Pen Nanolithography", Presented at International Conference on Nanoscience and Technology (ICONSAT) – 2014, Institute of Nanoscience and Technolgy, Mohali, 3rd-5th March 2014.
20. Geetika Tanwar, Pankaj B. Agarwal, and Shriniwas Yadav, "Comparative Study of SWNTs Dispersion using Organic Solvent and Surfactant", Presented at 17th International Workshop on Physics of Semiconductor Devices (IWPSD) – 2013, Amity University, Noida, 10th-13th December 2013. Springer Link ( PDF)
19. P. Vishnu Chaitanya and Pankaj B. Agarwal, "Two Input Multiplexer based on Single-Electronics", Presented at 17th International Workshop on Physics of Semiconductor Devices (IWPSD) – 2013, Amity University, Noida, 10th-13th December 2013.Springer Link (PDF )
18. Pankaj B. Agarwal, Geetika Kanwar, Shriniwas Yadav and Deepak Kumar Panwar, "Positioning of Carbon Nanotubes between Micro-electrodes for CNT-FET Fabrication", Presented at International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), BITS-Pilani, Goa Campus, Goa, 23rd -24th February 2013.
17. Shriniwas Yadav, Pankaj B. Agarwal and Inderpreet Kaur, "Functionalization and Positioning based Sensing on Graphene", Presented at International Conference on Emerging Technologies : Micro to Nano 2013 (ETMN-2013), BITS-Pilani, Goa Campus, Goa, 23rd -24th February 2013.
16. Amit Kumar Goyal and Pankaj B. Agarwal, "Nano-patterning of 16-MHA over Palladium Substrate using Dip-pen Nano-Lithography (DPN)", 1st National Conference on Micro and Nano Fabrication, CMTI, Bangalore, 21st-23rd January,2013.
15. Smriti Sahu, Pooja Kapse and Pankaj B. Agarwal, “Effect of Plasma Ashing on 16-MHA Self-assembled Monolayer”, Presented at International Workshop on Physics of Semiconductor Devices (IWPSD) – 2011, I.I.T., Kanpur, 19th-22nd December 2011.
14. A. Kumar, Pankaj B. Agarwal, Sumit Sharma and D. Kumar, “Nano-scale Patterning of Silicon Nanoparticles on Silicon Substrate by Dip-Pen-Nanolithography”, Presented at International Symposium on Semiconductor Materials and Devices (ISSMD) – 2011, M. S. University of Baroda, Vadodra, 28th-30th January 2011.
13. Vikram Singh, Shashank N., Pankaj B. Agarwal, R.S. Shekhawat, Dinesh Kumar and R.K. Nahar, "Study of Gas Sensing Properties of HfO2 High-K Dielectric Thin Films Employing Kelvin Probe Measurements", Presented at National Conference on VLSI, MEMS & NEMS, Amity University, Noida, INDIA, 23rd -24th September 2010.
12. Abhishek Kumar Gupta, Pankaj B. Agarwal, and Anil Kumar, “Design and Simulation of Single Electron Inverter for Room Temperature Operation”, Presented at International Conference on Nanoscience and Technology (ICONSAT) – 2010, IIT Mumbai, 17th-20th February 2010.
11. A. Kumar, Pankaj B. Agarwal, Sanjeev K. Gupta, S. Das and D. Kumar, “AFM Based Nano-patterning Process Integrable with Micron Size Features”, Presented at International Conference on Nanoscience and Technology (ICONSAT) – 2010, IIT Mumbai, 17th-20th February 2010.
10. V. Singh, R. S. Shekhawat, Pankaj B. Agarwal, and R. K. Nahar, “Kelvin Probe Measurements for Gas Sensing Properties of Hafnium Oxide Thin Films”, Presented at National Symposium on Vacuum Technology and its Applications to Electronic Devices and Systems (IVSNS-2009), CEERI, Pilani, INDIA, 11th -13th November 2009.
9. A. Kumar, Pankaj B. Agarwal, Surjeet Das, S. K. Gupta and A. K. Sharma, “Low-Roughness Ti/Au Ultra-films by E-Beam Evaporation for AFM-Based Nano-Lithography”, Presented at the National Symposium on Vacuum Technology and its Applications to Electronic Devices and Systems (IVSNS-2009), CEERI, Pilani, INDIA, 11th -13th November 2009.
8. A. Kumar, Pankaj B. Agarwal, Vikram Singh, Mahesh Kumar, D. Kumar and Chandrashekhar, “Direct Nano-writing by Self-assembly of 16-MHA on Gold Surface using Dip-Pen Nanolithography”, Presented at the International Conference on Smart Materials Structures and Systems, IISC, Bangalore, INDIA, 24th -26th July 2008.
7. A. Kumar, Pankaj B. Agarwal, B. C. Joshi, Vikram Singh, A. K. Sharma, D. Kumar and Chandrashekhar, “Growth of Silicon Nano-particles on Oxide and Nitride Surfaces by Low Pressure Chemical Vapour Deposition (LPCVD) Process for Single Electron Devices Applications”, Presented at the International Conference on Smart Materials Structures and Systems, IISC, Bangalore, INDIA, 24th -26th July 2008.
6. Pankaj B. Agarwal, A. Kumar and Vibha Sharma, “Design and Simulation of Three Input AND gate and Half-Adder using Single Electron Transistors”, Presented at the Mini-Colloquia on Compact Modeling of Advance MOSFET Structures and mixed Mode Applications (IEEE-EDS Sponsored), University of Delhi South Campus, New Delhi, INDIA, 5th -6th January 2008.
5. Pankaj B. Agarwal, A. Kumar and Sachin Kumar, “Effects of Tip Convolution on Atomic Force Microscopy (AFM) Images of Silicon Nanoparticles”, Presented at the IMS Conference, Punjab Engineering College, Chandigarh, INDIA, 17th -18th August 2007.
4. Vibha Sharma, Pankaj B. Agarwal, and A. Kumar, “Simulation of Single Electron Devices”, Presented at the IMS Conference, Punjab Engineering College, Chandigarh, INDIA, 17th -18th August 2007.
3. Pankaj B. Agarwal, A. Kumar, B. C. Joshi, A. Sharma, and K. J. Rangra, “A Low-Temperature Process for Synthesis of Silicon Nanoparticles”, Presented at the National Conference on Recent Advances in Material Science (RAMS), Kurukshetra University, Kurukshetra, INDIA, 27th -29th September 2006.
2. A. Kumar, Pankaj B. Agarwal, B. C. Joshi, R. K. Mishra, A. K. Sharma, K. J. Rangra and H. Chander, “Self-Assembly of Silicon Nano-particles by Chemical Vapour Deposition and Characterization”, Presented at the Self Assembly Routes for Nanotech Materials (SARNAM-2006), BARC, Mumbai, INDIA, 26th -28th April 2006.
1. A. Kumar, Pankaj B. Agarwal, B. C. Joshi, A. Sharma, and R. P. Gupta, “Silicon Nanoparticles Synthesis by Chemical Vapour Deposition and Characterization”, Presented at the National Symposium on Recent Trends in Physics, BITS, Pilani, INDIA, 4th -5th November 2005.