Chasiotis V.K.,Tsakirakis, Termentzi A., Machera K. and Filios A.E. (2021). Drying and quality characteristics of Cannabis sativa L. inflorescences under constant and time-varying convective drying temperature schemes. Thermal Science and Engineering Progress. https://doi.org/10.1016/j.tsep.2021.101076.
Chasiotis V.K., Tzempelikos D.A., Mitrakos D., and Filios A.E. (2021). Numerical and experimental analysis of heat and moisture transfer of Lavandula x allardii leaves during non-isothermal convective drying. Journal of Food Engineering. https://doi.org/10.1016/j.jfoodeng.2021.110708.
Chasiotis V.K., Tzempelikos D.A. and Filios A.E. (2021). Assessment of constant and time-varying temperature schemes on the convective drying characteristics of hemp leaves. Case Studies in Thermal Engineering. https://doi.org/10.1016/j.csite.2021.101098.
Chasiotis V., Nadi F. and Filios A.E. (2021). Evaluation of multilayer perceptron neural networks and adaptive neuro-fuzzy inference systems for the mass transfer modeling of Echium amoenum Fisch. & C. A. Mey. Journal of The Science of Food and Agriculture. https://doi.org/10.1002/jsfa.11323.
Chasiotis V., Tzempelikos D.A., Filios A.E. and Moustris K. (2020). Artificial neural network modeling of moisture content evolution for convective drying of cylindrical quince slices. Computers and Electronics in Agriculture. vol. 172. https://doi.org/10.1016/j.compag.2019.105074.
Tzempelikos D.A., Vouros A.P., Bardakas A.V., Filios A.E. and Margaris D.P. (2015). Experimental study on convective drying of quince slices and evaluation of thin-layer drying models. Engineering in Agriculture, Environment and Food, Vol. 8, Issue 3, pp. 169-177. https://doi.org/10.1016/j.eaef.2014.12.002.
Bardakas A.V., Chasiotis V.K., Tzempelikos D.A. and Filios A.E. (2014). Design and implementation of a three axis digitally controlled traverse system for flow surveys in a drying chamber. International Journal of Engineering & Technology, Vol.3, No.3, pp. 350-357. https://www.sciencepubco.com/index.php/ijet/article/view/3044.
Tzempelikos D.A., Vouros A.P., Bardakas A.V., Filios A.E. and Margaris D.P. (2014). Case studies on the effect of the air drying conditions on the convective drying of quinces. Case Studies in Thermal Engineering, Volume 3, pp. 79-85. https://doi.org/10.1016/j.csite.2014.05.001.
Vouros A.P., Mentzos A.D., Xanthopoulos E.I., Filios A.E. and Margaris D.P. (2013). Influence of an Exit Wall Boundary on the Flow of a Circular Jet. Journal of Applied Fluid Mechanics, Vol. 6, No. 3, pp. 465-471. (Link-1, Link-2, Link-3).
Tachos N.S., Filios A.E. and Margaris D.P. (2010). A comparative numerical study of four turbulence models for the prediction of horizontal axis wind turbine flow. Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, Vol. 224, No.9, pp.1973-1979. doi: 10.1243/09544062JMES1901. (Link in RG).
Kyparissis S.D., Margaris D.P., Panagiotopoulos E.E. and Filios A.E. (2009). CFD analysis on the effects of the blade design method to the centrifugal pump performance. Intern. Review of Mechanical Engineering (I.RE.M.E.), Vol. 3, n. 5, pp.109-119. (Link-1, Link-2).
Kyparissis S.D., Douvi E.C., Panagiotopoulos E.E., Margaris D.P. and Filios A.E. (2009). CFD flowfield analysis and hydrodynamic double-arc blade design effects for optimum centrifugal pump performance. Intern. Review of Mechanical Engineering (I.RE.M.E.), Vol. 3, n. 3, pp.284-294 (Link-1, Link-2).
Tachos N.S., Filios A.E., Margaris D.P. and Kaldellis J.K. (2009). A computational aerodynamics simulation of the NREL phase II rotor. The Open Mechanical Engineering Journal, Vol. 3, pp. 9-16. http://dx.doi.org/10.2174/1874155X00903010009.
Kaldellis J.K., Kavadias K.A. and Filios A.E. (2009). A new computational algorithm for the calculation of maximum wind energy penetration in autonomous electrical generation systems. Applied Energy, Vol. 86, Issues 7-8, pp. 1011-1023. https://doi.org/10.1016/j.apenergy.2008.10.019. (Link in RG)
Vrachopoulos M.Gr, Filios A.E. and Fatsis A. (2008). Determination of the thermal and cooling needs of the broader region of Athens. Renewable Energy, Volume 33, Issue 12, pp. 2615-2622. https://doi.org/10.1016/j.renene.2008.02.022. (Link in RG).
Bacharoudis E.C., Filios A.E., Mentzos M.D. and Margaris D.P. (2008). Parametric study of a centrifugal pump impeller by varying the outlet blade angle. The Open Mechanical Engineering Journal, Volume 2, pp. 75-83. http://dx.doi.org/10.2174/1874155X00802010075. (Link in RG).
Filios A.E., Tachos N.S., Fragias A.P. and Margaris D.P. (2007). Broadband Noise Radiation Analysis for a HAWT Rotor. Renewable Energy, Volume 32, Issue 9, pp. 1441-1622. https://doi.org/10.1016/j.renene.2006.10.002. (Link in RG).
Bacharoudis E., Vrachopoulos M.Gr., Koukou M.K., Margaris D., Filios A.E. and Mavrommatis S.A. (2007). Study of the natural convection phenomena inside a wall solar chimney with one wall adiabatic and one wall under a heat flux. Applied Thermal Engineering, Vol. 27, Issue 13, pp. 2266-2275. https://doi.org/10.1016/j.applthermaleng.2007.01.021. (Link in RG).
Papaefthimiou V.D., Katsanos C.O., Vrachopoulos M.Gr., Filios A.E, Koukou M.K. and Layrenti F.G. (2007). Experimental measurements and theoretical predictions of flow field and temperature distribution inside a wall solar chimney. Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, Vol. 221, Number 1, pp. 33-41. https://doi.org/10.1243/0954406JMES308. (Link in RG).
Vrachopoulos M.Gr., Filios A.E., Kotsiovelos G.T. and Kravvaritis E.D. (2007). Incorporated Evaporative Condenser. Applied thermal engineering, Volume 27, Issues 5-6 , pp. 823-828. https://doi.org/10.1016/j.applthermaleng.2006.09.021. (Link in RG)
Kaldellis J.K., Kondili E. and Filios A.E. (2006). Sizing a hybrid wind-diesel stand-alone system on the basis of minimum long-term electricity production cost. Applied Energy, Vol. 83, Issue 12, pp. 1384-1403. https://doi.org/10.1016/j.apenergy.2006.01.006. (Link in RG).
Kaldellis J.K., Kavadias K.A., Filios A.E., and Garofallakis S. (2004). Income loss due to wind energy rejected by the Crete island electrical network – the present situation. Applied Energy, 79, pp.127-144. https://doi.org/10.1016/j.apenergy.2003.12.008. (Link in RG)
Bacharoudis V., Vrachopoulos M., Koukou M. and Filios A. (2006). Numerical investigation of the buoyancy-induced flow field and heat transfer inside solar chimneys. Proceedings of the 2006 IASME/WSEAS International Conference on Energy & Environmental Systems, Chalkida, Greece, May 8-10, pp. 293-298. (Link in RG)
Vrachopoulos M.Gr., Filios A.E., Fatsis A. and Kotsiovelos G.T. (2006). A Methodology for the estimation of the thermal and cooling loads of urban areas. Proceedings of the 2006 IASME/WSEAS International Conference on Energy & Environmental Systems, Chalkida, Greece, May 8-10, pp. 311-316. (Link 2)
Margaris D.P., Papanikas D.G.and Filios A.E. (2001). Validation of existing models for the prediction of the two-phase flow behavior in oil-natural gas pipelines. First National Conference on Recent Advances in Mechanical Engineering, ASME Greek Section, Paper ANG1/P103, 17-20 September, University of Patras, Greece, pp. 1-8 (Link).
Καλούρη-Αντωνοπούλου Ουρ., Αθανασούλα-Ρέππα Α. και Φιλιός Α.Ε. (2002). Η Ιστορική εξέλιξη της ΣΕΛΕΤΕ – Εκπαιδευτική πολιτική και παιδαγωγική κατάρτιση. 2ο Διεθνές Συνέδριο " Η παιδεία στην αυγή του 21ου αιώνα, Ιστορικο-συγκριτικές προσεγγίσεις", Πανεπιστήμιο Πατρών 4-6 Οκτωβρίου 2002. (Link in RG).
Φιλιός A.E., Καλούρη-Αντωνοπούλου Ο., Αθανασούλα-Ρέππα Α., Αθανασιάδης Η. και Βραχόπουλος, Μ. (2002). Στάσεις και αντιλήψεις των σπουδαστων της ΣΕΛΕΤΕ για τη χρήση των ηλεκτρονικών υπολογιστών. 3ο Πανελλήνιο Συνέδριο «Διδακτική των Φυσικών Επιστημών και Εφαρμογή Νέων Τεχνολογιών στην Εκπαίδευση», 9-11 Μαϊου, Ρέθυμνο.
Pantazis V., Papanikas D.G., Vougas G. and Filios A.Ε. (1992). Helicopter rotor downwash calculation using the vortex element method for the approximation of the arbitrary vortex wake. The Third National Conference of Applied Mechanics, Athens, June 29-July 1, Vol. II, pp. 772-781. (Link 2).
Φιλιός, Α.Ε. (2021), Μηχανική των Ρευστών - 600 Ερωτήσεις επανάληψης.
Φιλιός, Α.E. (2000), Πειραματική Ρευστοδυναμική. ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. (2001), Δυναμική των Ρευστών – Εξισώσεις Διατήρησης και Εφαρμογές. ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.Ε. και Τζεμπελίκος, Δ. (2001), Υπολογιστικές Ασκήσεις Στροβιλομηχανών. ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. (2000), Μονοδιάστατη συμπιεστή ροή. ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Βραχόπουλος, Μ. και Φιλιός, Α.E. (1998), Σημειώσεις Ήπιων Μορφών Ενέργειας, ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. (1997), Θεωρία και Ασκήσεις Αεριοστροβίλων. ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. (1996), Σημειώσεις και Ασκήσεις Μηχανικής των Ρευστών, ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. (1996), Σημειώσεις Υδροδυναμικών Μηχανών, Τεύχος Β, ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. (1992), Σημειώσεις και Ασκήσεις Υδροδυναμικών Μηχανών, ΤΕΙ Πειραιά.
Φιλιός, Α.E. (1992), Σημειώσεις Υδροδυναμικών Μηχανών, Τεύχος Α, ΑΣΕΤΕΜ-ΣΕΛΕΤΕ.
Φιλιός, Α.E. και Παπανίκας, Δ. (1992), Σημειώσεις Αεροδυναμικής, Εκδ. Παν. Πατρών.
Φιλιός, Α.E. (1994), “Κώδικας Boerger.f77″, Εργ. Μηχανικής Ρευστών, Πανεπιστήμιο Πατρών, ΕΔ 1994-01.
Φιλιός, Α.E. και Δανιήλ, Ε. (1987), “Μελέτη απεριόριστου ροϊκού πεδίου γύρω από αξονοσυμμετρικά σώματα – Κώδικας Slebo.f77″, Εργ. Μηχανικής Ρευστών, Πανεπιστήμιο Πατρών, ΕΔ 1987-03.