KCI Journals
Ju Hwan Choi , Gu Ho Kim , Jae Kwang Kim , Yong Ki Kim , Hyun Kyu Suh. Analysis of Flow Performance According to Actuator Geometry of Receptacle for Hydrogen Charging System with Filter Applied, Transaction of KHNES, Vol.34, No.1, pp.17-25, 2023
Da Woon Jung, Jin Choi, Hyun Kyu Suh, Analysis of Thermal Flow Characteristics according to the Opening Ratio of High-Pressure Valve for Hydrogen Storage Tank, Transaction of the Korean Hydrogen and New Energy Society, Vol.33, No.5, pp. 525-533, 2022
Yun Seok Song, Young Chan Lim, In Gang Park, Hyun Kyu Suh, Improvement of Low-temperature Oxidation Reaction of Biodiesel Reduction Mechanism and Analysis of 3-D Engine, Journal of KSC, Vol.27, No.4, pp.29-39, 2022
Ju Hwan Choi, Hyun Kyu Suh, Reduction of Particulate Matter in a Direct Injection Gasoline Engine According to GPF Material, Journal of KSMT, Vol.24, No.1, pp.33039, 2022
Ju Hwan Choi, Se Hoon Min, Hyun Kyu Suh, Comparative Analysis of Filtration and Regeneration Performance According to GPF Porous Media Material, Transaction of KASE, Vol.30, No.9, pp.743-751, 2022
Da Woong Jung, Hyun Kyu Suh, A Study on the Analysis of Heat Dissipation Performance of the Plate According to the Surface Coating Material and Thickness, Journal of KSMT, Vol.24, No.3, pp.496-503, 2022
Da Woon Jung, Jin Choi, Hyun Kyu Suh, Analysis of Thermal Flow Characteristics according to the Opening Ratio of High-Pressure Valve for Hydrogen Storage Tank, Transaction of KHNES, Vol.33, No.5, pp.525-533, 2022
Da Woon Jung, Jin Choi, Hyun Kyu Suh, Analysis of Thermal Flow Characteristics according to the Opening Ratio of High-Pressure Valve for Hydrogen Storage Tank, Transaction of the Korean Hydrogen and New Energy Society, Vol.33, No.5, pp. 525-533, 2022
In Gang Park, Young Chan Lim, Hyn Kyu Suh, Suhan Park, Biodiesel Spray Analysis Using Spray Model Constant, Transaction of KSME, Vol.45, pp.289-296, 2021
Ju Hwan Choi , Young Chan Lim , Hyun Kyu Suh, The Combustion Characteristics of Diesel-Biodiesel Blended Fuel Droplets Using the Modified Image Processing Method According to Flame Instability, Journal of ILASS-Korea, Vol.26, No.3, pp.142-148, 2021
Young Chan Lim, Hyun Kyu Suh, Analysis of CH2O, CH, and C2 Species in a Single Droplet Flame and the Droplet Combustion Characteristics using a Short Wavelength Filtering, Journal of Korean Soc. Combust, Vol.26, No.3, pp.1-9, 2021
Se Hun Min, Hyun Kyu Suh, Spray Characteristics of Diesel Fuel in a Cylinder under Cryogenic Intake Air Temperature Conditions, Journal of ILASS-Korea, Vol.26, No.1, pp.18-25, 2021
In Gang Park, Young Chan Lim, Hyun Kyu Suh, Numerical Study on the Constant Volume Combustion Characteristics of Biodiesel According to the Change of EGR Rate, Journal of KSC, Vol25, No.3, pp.39-47, 2020
Se Hoon Min, Hyun kyu Suh, Effect of Reduction of Production Process in Core Partsof Aluminum IMS on Load and Stress Distributions, Journal of KSMT, Vol.22, No.3, pp.538-544, 2020
Se Hun Min, Hyun Kyu Suh, Effect of Diameter Increase on Stress Distribution of Lightweight Aluminum IMS for xEV, Journal of KSMT, Vol. 22, No. 1, pp. 159-165, 2020
Jin Choi, Hyun Kyu Suh, Effect of Cylinder Geometries on the Soot Reduction in a Compression Ignition Engine with Swirl Nozzle Injector, Transactions of KSME, Vol. 44, No. 2, pp. 143-150, 2020
Young Chan Lim, Jun Woo Jung, Hyun Kyu Suh, A Prediction on the Flammability Limits of Biodiesel Fuel in the High Temperature and Pressure Conditions, Journal of ILASS-Korea, Vol. 24, No. 4, pp. 157-162, 2019
Se Hun Min, Hong Keun Kim, Hyun Kyu Suh, Effect of Diameter of Shaft Part on the Load Distribution Characteristics in Tubular & Solid Shaft Yoke for Al-IMS, Journal of KSMT, Vol. 21, No. 4, pp. 709-714, 2019
Jun Woo Jung, Young Chan Lim, Hyun Kyu Suh, The Effect of Target Species Changing on the Mechanism Reduction in DRGEP Method, Journal of The Korean Society of Combustion, Vol. 24, No. 3, pp. 1-8, 2019
Se Hun Min, Junpyo Cha, Hyun Kyu Suh, The Effect of Simulated-EGR(N2 + CO2) Composition on the Distributions of Fuel Mass Fraction and Formation/Oxidation of Exhaust Emissions in a CI Engine, Transactions of KSME, Vol. 43, No. 12, pp. 839-846, 2019
Jin Choi, Hyun Kyu Suh, Effect of Swirl Flow in a Cylinder induced by the Swirl Nozzle Injector on the Performance of CI Engine, Transactions of KSME, Vol. 43, No. 9, pp. 621-629, 2019
Jun Woo Jung, Young Chan Lim, Hyun Kyu Suh, Biodiesel-Combustion Analysis through a Study on the Reduction of the Chemical-Reaction Mechanism, Transactions of KSME, Vol. 43, No. 6, pp. 423-431, 2019
Jin Choi, Hyun Kyu Suh, Spray Atomization and In-Cylinder Mixture Characteristic of the Swirl Nozzle, Transactions of KSME, Vol. 43, No. 6, pp. 407-414, 2019
Se Hun Min, Hong Keun Kim, Hyun Kyu Suh, Stress Distribution Characteristics of Al-IMS for Passenger Vehicle, Journal of KSMT, Vol. 21, No. 3, pp. 517-522, 2019
Seok Hoon Jeong, Hyun Kyu Suh, “Effect of Vortex Generator in Intake Pipe on the Moisture Concentration Distributions and Combustion Performance in a CI Engine,” Journal of ILASS-Korea, Vol. 23, No. 4, pp. 169-174, 2018
Se Hun Min, Jin Seup Yeom, Hyun Kyu Suh, A Study on the Indentation Process Improvement of Tubular Shaft Yoke and Splined Shaft in IMS Module, Journal of KSMT, Vol. 20, No. 1, pp. 127-133, 2018
Jin Seup Yeom, Hyun Kyu Suh, The Effect of Shaft Hole Length on the A-IMS Tubular Shaft Machining, Journal of KSMT, Vol. 20, No. 1, pp. 96-101, 2018
Se Hun Min, Hyun Kyu Suh, Improvement of Tubular Shaft Yoke Spline Machining in Both Side IMS Module, Journal of KSMT, Vol. 20, No. 6, pp. 924-928, 2018
Young Chan Lim, Hyun Kyu Suh, Seung Hyun Yoon, “Prediction of Biodiesel Homogeneous Combustion and Flammability Limits in Compression Ignition Condition,” Trans. Korean Soc. Mech. Eng. B, Vol. 42, No. 11, pp. 711-719, 2018
Seok Hoon Jeong, Hyun Kyu Suh, “Influence of Fin Characteristics on the Turbulent Flow in IHX for a Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 20, No. 4, pp. 413-419, 2018
Young Chan Lim, Jun Woo Chung, Hyun Kyu Suh, “A Study on the NOX Formation Characteristics and Detailed Chemical Reaction Pathways of Biodiesel in the Various Ambient Conditions” Journal of Korean Soc. Combustion, Vol. 23, No. 2, pp. 27-34, 2018
Se Hun Min, Hyun Kyu Suh, “Prediction of Diesel Fuel Spray Characteristics in Compression Ignition Engine Cylinder by Intake Humidification,” Journal of ILASS-Korea, Vol. 23, No. 1, pp. 30-35, 2018
Se Hun Min, Hyun Kyu Suh, “The Numerical Study on Prediction of Diesel Fuel Spray Evolution in a Different Types of Nozzle Geometry,” Journal of ILASS-Korea, Vol. 22, No. 4, pp. 169-174, 2017
Seok Hoon Jeong, Hyun Kyu Suh, “The Effect of K-ε Turbulence Model on the Performance Analysis of Battery Cooling Systems,” Journal of Korean Soc. of Mechanical Technology, Vol. 19, No. 4, pp. 513-517, 2017
Se Hun Min, Hyun Kyu Suh, The Effect of Sliding Cage Geometry on the A-IMS Module for Commercial Vehicle, Journal of KSMT, Vol. 19, No. 1, 2017
Hong Keun Kim, Se Hun Min, Hyun Kyu Suh, An Improvement of Production Straightness of A-IMS Tubular Shaft on According to the Number of Die Bearing, Journal of KSMT, Vol. 19, No. 3, pp. 396-401, 2017
Hong Keun Kim, Se Hun Min, Hyun Kyu Suh, A Study on Improvement of Spline Processing in A-IMS Tubular Shaft, Journal of KSMT, Vol. 19, No. 3, pp. 421-426, 2017
Young Chan Lim, Hyun Kyu Suh, “Experimental Study on the Soot Formation Characteristics of Alkane-based Single Fuel Droplet,” Journal of ILASS-Korea, Vol. 22, No. 2, pp. 80-86, 2017
Young Chan Lim, Hyun Kyu Suh, “Experimental Study on the Soot Formation Behavior of Octane Single Fuel Droplet Under the Constant Volume Combustion Conditions,” Trans. Korean Soc. Mech. Eng. B, Vol. 41, No. 6, pp. 389-395, 2017
Se Hun Min, Kyung Bum Park, Hyun Kyu Suh,. Optimal design of commercial A-IMS core components using multi-stage cold forging method, Journal of KSMT, Vol. 18, No. 2, pp. 268-274, 2016
Se Hun Min, Hyun Kyu Suh, Optimal Design of the A-IMS Core Components for Commercial Vehicle by the Effect of Upper Die Type, Journal of KSMT, Vol. 18, No. 2, pp. 294-300, 2016
Se Hun Min, Hyun Kyu Suh, The Effect of Torque Variation on the Stress Distributions Characteristics in A-IMS for Passenger Vehicle, Journal of KSMT, Vol 18, No. 6, pp. 949-954, 2016
Seok Hoon Jeong, Hyun Kyu Suh, “Predictions of the Cooling Performance on an Air-Cooled EV Battery System According to the Air Flow Passage Shape,” Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 12, pp. 801-807, 2016
Se Hun Min, Hyun Kyu Suh, “Numerical Study on the Fuel Spray Targeting for the Improvement of HSDI Engine Performance,” Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 9, pp. 596-576, 2016
Young Chan Lim, Hyun Kyu Suh, “Effect of High Temperature and Pressure Conditions on the Combustion Characteristics of n-butanol and n-heptane Fuel,” Journal of ILASS-Korea, Vol. 21, No. 1, pp. 29-36, 2016
Young Chan Lim, Hyun Kyu Suh, “Prediction of Biodiesel Combustion, CO and NOX Emission Characteristics in Accordance with Equivalence Ratio” Journal of Korean Soc. Combustion, Vol. 21, No. 1, pp. 1-7, 2016
Min S. H. and Suh H. K., Design optimization of the asymmetry pinch yoke according to the slit length, Journal of KSMT, Vol. 18, No. 1, pp. 102-108, 2016
Se Hun Min, Hyun Kyu Suh, “Numerical Study on the Effect of Nozzle Geometry on the Small CRDI Engine Performance,” Journal of ILASS-Korea, Vol. 20, No. 4, pp. 254-260, 2015
Young Chan Lim, Hyun Kyu Suh, “Effect of Initial Diameter on the Soot Generation of Toluene Fuel Droplet,” Journal of ILASS-Korea, Vol. 20, No. 4, pp. 261-267, 2015
Young Chan Lim, Hyun Kyu Suh, “Effect of mixing ratio of n-heptane fuel on the combustion characteristics of n-butanol fuel” Journal of Korean Soc. Combustion, Vol. 20, No. 3, pp. 1-6, 2015
Se Hun Min, Hyun Kyu Suh, “Effect of operating conditions on the combustion and emission characteristics in small HSDI CI engine,” Journal of ILASS-Korea, Vol. 19, No. 4, pp. 699-705, 2015
Young Chan Lim, Hyun Kyu Suh, “Effect of Ambient Conditions on the Soot Generation of Decane Fuel Droplet,” Journal of ILASS-Korea, Vol. 19, No. 4, pp. 1-5, 2014
Hyun Kyu Suh, “Effect of Intake Air Temperature on the Performance and Emissions Characteristics of SI Engine,” Journal of Korean Soc. of Mechanical Technology, Vol. 16, No. 4, pp. 1679-1684, 2014
Hyun Kyu Suh, “Study on the Combustion Characteristics of Methanol Fuel Droplet,” Journal of ILASS-Korea, Vol. 19, No. 3, pp. 109-114, 2014
Hyun Kyu Suh, "A Review on the Mixture Formation and Atomization Characteristics of Oxygenated Biodiesel Fuel," Journal of KSAE, Vol. 22, No. 1, pp. 183-192, 2014
Hyun Kyu Suh, “Effect of Blending Ratio on the Injection Rate Characteristics of Biodiesel Fuel in a CI Engine,” Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 6, pp. 841-846, 2013
Hyun Kyu Suh, “Numerical Analysis of Internal Flow and Temperature Distributions of Battery for the Electric Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 6, pp. 813-818, 2013
Hyun Kyu Suh, “Effect of Inlet Geometry on the Cooling Performance of Battery Pack for an Electric Vehicle,” Journal of Korean Soc. of Mechanical Technology, Vol. 15, No. 5, pp. 679-684, 2013
Hyun Kyu Suh, “Effect of Ultrasonic Frequency on the Atomization Characteristics of Single Water Droplet in an Acoustic Levitation Field,” Journal of ILASS-Korea, Vol. 18, No. 3, pp. 1-6, 2013
Yunsub Sin, Geesoo Lee, Hyunchul Kim, Soo-Jin Jeong, Hyun Kyu Suh, "Effect of Flow Control Valve Type on the Performance of DME High Pressure Fuel Pump," Journal of KSAE, Vol. 21, No. 5 pp. 67-73, 2013
Yunsub Sin, Geesoo Lee, Hyunchul Kim, Sangshin Kwak, Suk Shin Shin, Hyun Kyu Suh, " A Study on the Injection Characteristics of Swirl Nozzle Injector in Common-rail System for High Pressure Fuel Injection," Journal of KSAE, Vol. 21, No. 4, pp. 89-95, 2013
Hyun Kyu Suh, “Influence of Initial Diameter on the Combustion Characteristics of n-heptane Droplet,” Journal of ILASS-Korea, Vol. 18, No. 2, pp. 94-99, 2013
Chunghui Kim, Hyunchul Kim, Geesoo Lee, Jeonghwang Cho, Munsoo Chon, Suk Shin Shin, Hyun Kyu Suh, " PM Reduction Characteristics of Partial Metal DPF with Screen Mesh Filter Structure," Journal of KSAE, Vol. 21, No. 3, pp. 82-87, 2013
Hyun Kyu Suh, Jee Won Kim, and Chang Sik Lee, “Effect of Injection Condition on the Diesel Fuel Atomization in a Multi-hole Nozzle,” Journal of ILASS-Korea, Vol. 14, No. 1, pp. 8-14, 2009
Su Han Park, Hyun Kyu Suh, Hyung Jun Kim, and Chang Sik Lee, “Spray Characteristics of Biodiesel Fuel by Blending Other Fuels in a Common Rail Injection System,” Journal of KSAE, Vol. 17, No. 2, pp. 82-89, 2009
Su Han Park, Hyung Jun Kim, Hyun Kyu Suh, Mun Soo Chon, and Chang Sik Lee, “Effect of Ambient Conditions in the Chamber on the Spray Behavior and Atomization Characteristics of Biodiesel-Ethanol Blended Fuels,” Journal of ILASS-Korea, Vol. 13, No. 4, pp. 180-186, 2008
Hyung Jun Kim, Hyun Kyu Suh, and Chang Sik Lee, “Spray and Evaporation Characteristics of DME Fuel at the High Pressure and Temperature,” Journal of ILASS-Korea, Vol. 12, No. 2, pp. 101-107, 2007
Hyun Kyu Suh, Su Han Park, and Chang Sik Lee, “Effect of Injector Energizing Duration on the Atomization Characteristics of Biodiesel Fuel,” Journal of ILASS-Korea, Vol. 12, No. 2, pp. 108-114, 2007
Young Taek Seo, Hyun Kyu Suh, and Chang Sik Lee, “A Study on the Injection Characteristics of Biodiesel Fuels Injected through Common-rail Injection System,” Journal of KSAE, Vol. 15, No. 5, pp. 97-104, 2007
Hyun Kyu Suh, Ji Hong Park, and Chang Sik Lee, “Macroscopic Behavior and Atomization Characteristics of Dimethyl Ether,” Journal of KSAE, Vol. 15, No. 5, pp. 30-37, 2007
Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, “Effects of Nozzle Orifice Shape and Nozzle Length-Diameter Ratio on Internal and External Flow Characteristics of Diesel and Biodiesel Fuel,” Journal of KSME, Vol. 31, No. 3, pp. 264-272, 2007
Su Han Park, Hyun Kyu Suh, and Chang Sik Lee, “Effects of Nozzle Length-Diameter Ratio on Internal and External Flow Characteristics of Biodiesel Fuel,” Journal of KSAE, Vol. 15, No. 4, pp. 94-100, 2007
Mun Soo Chon, Yong Ha Hwang, Hyun Kyu Suh, and Chang Sik Lee, “Atomization and Evaporation Characteristics of DME Fuel for the Application of HCCI Diesel Engine,” Journal of ILASS-Korea, Vol. 11, No. 3, pp. 140-146, 2006
Ji Hong Park, Hyun Kyu Suh, Sung Wook Park, Jae Wook Kim, and Chang Sik Lee, “Effect of Injector-Driven Type on Spray Behavior and Fuel Atomization Characteristics,” Journal of KSAE, Vol. 14, No. 1, pp. 17-24, 2005
Mun Soo Chon, Hyun Kyu Suh, Sung Wook Park, and Chang Sik Lee, “Internal Structure and Velocity Field of the Impinging Diesel Spray on the Wall,” Journal of ILASS-Korea, Vol. 10, No. 3, pp. 1-8, 2005