Embedded Files
Tile and grout cleaning Perth | 0488 850 810
Contact Us Today!
0488 850 810
AU
https://sites.google.com/site/abtileandgroutcleaningperth/
https://tilegrout-cleaning.com.au/perth/
grout cleaning Perth
grout cleaning Perth
Absolute tile and grout cleaning services for Perth WA 6052 with 35 years experience.
The $349.00 offer of Absolute Tile & Grout is valid for a standard tile cleaning service.
Price will vary for very heavily soiled tiles, smaller tiles or other issues that may affect the condition of the tile such as wax coatings.
Cleaning grout and tile costs $435 on average with a typical range between $275 and $600.
Depending on how dirty it is and the size of the job, you might pay anywhere from $275 to $1,000.
You’ll pay between $8.50 to $11 per square meter, which depends mostly on how many tile grout lines you have.
The smaller the tiles, the more there is to clean.
Grout is a mixture of water, cement, and sand, this goes into the space between tiles during installation.
If unsealed, this highly porous material easily absorbs grease, grime, mold, mildew and lime scale.
The soils, dirt, grime and spills create marks and patches on the lines of the tile floor, and subsequently make the entire floor look dirty and unattractive.
Perth's Most Thorough Tile and Grout Cleaning 1.
Pre-treat Tile and Grout We apply an alkaline-based de-greasing solution and allow it to penetrate for up to 20 minutes to loosen up grease, soil and contaminants.
2.
Power Scrub Surface Surrogated brushes agitate the grout lines and tile surface.
We focus on edges and baseboards too, to ensure a great result for the entire floor.
3.
Extract Turbo Rinse Tile and grout is extracted, or pressure rinsed using heated water.
Waste is captured and extracted in one process.
4.High Power Speed Dry Once we've removed all remaining water from the floor, we use high powered fans to thoroughly dry the tile and grout lines.
Why does my grout get so dirty? Keeping tiled floors clean can be a tough task, and grout can be particularly stubborn.
The most common cause of dirty grout is using too much water and detergent while you’re washing the floor.
Here’s why.
Grout is highly porous, which is what makes it effective at protecting your tiles.
Unfortunately, every floor clean washes dirty water onto the tiles and into your grout.
This creates a black film that can be difficult to remove and in humid areas, be a breeding ground for bacteria and mould.
How do I stop the tile and grout from getting dirty again after cleaning? The most thorough clean can’t stop a floor from getting dirty again.
Absolute Tile and Grout can apply a penetrating sealer that will prevent dirt, grease and oil from binding to your grout and tiles, allowing them to be easily cleaned.
My Grout is BLACK! Can you clean it back to white again? Most of the time we are able to restore grout back to its original condition.
We apply an alkaline-based de-greasing solution and allow it to penetrate for up to 20 minutes to loosen up grease, soil and contaminants.
Why should a professional clean my tiles? Cleaning grout lines and porous or textured tiles requires tailored cleaning solutions that draw out the grease, grime and contaminants.
Some of the toughest contaminants to remove are the residues from cleaning solutions and soap scum in the bathroom and laundry.
The cleaning solutions need to be agitated with a grout brush or high-speed polisher and flushed away with a high-pressure cleaning system.
A skilled professional tile and grout cleaner will achieve the best possible cleaning results.
Tile and grout cleaning Perth | 0488 850 810
Contact Us Today!
0488 850 810
AU
Page updated
Google Sites
Report abuse