123 HP SETUP

123.hp.com/setup

To setup HP Printer on any device (computer, phone etc) you need to download the appropriate driver for your HP printer. This can be done easily by selecting the correct printer model before downloading the drivers (Supporting Software) from 123.hp.com/setup.

123 HP Printer - How to connect and install HP wireless Printer from 123.hp.com/setup

1. Firstly, turn on your wireless printer and use the touch screen display to setup HP printer in a wireless manner.

2. Now from the touch screen, press the ‘setup’ button and select ‘network’ option from the menu.

3. Thereafter select wireless network setup wizard from the ‘network’ menu. Now your HP printer will search for the wireless routers available in the range. Select your network from the list.

4. Enter the WEP/WPA passphrase for the network and then press ‘done’.  Now press ‘OK’ to confirm the settings. Press ‘OK’ again to print the wireless test report.

5. Now your HP printer has been setup on your wireless network.

6. Lastly download and install the printer driver from 123.hp.com/setup page to finish the process. 

7. Now to install HP wireless printer on your Windows operating system, follow easy steps mentioned below:

8. Turn on your printer to initiate the setup

9. Now connect HP printer with the Wi-Fi router. If you are not aware of how to do so, check the steps mentioned previously.

10. Now visit “www.123.hp.com/setup” website and download the drivers for the HP printer model you are using.

11. After finishing the download, go to the folder where drivers are saved. Double click on the driver & follow the easy to follow on-screen process to set up the drivers on your system. 

How To Configure HP Printer?

Set an HP printer at your home or workplace. Follow the steps of the stages one by one and successfully configure it via 123.hp.com setup.

Unpackaging your HP printer

1: Once you arrive home/ office with your latest HP printer, unpack it immediately.

2: Remove all the content from outside the printer such as tape and packaging.

3: Remove the tape and packaging from inside as well and take out the HP printer.

Power Settings

1: Once the packaging is done, take out the wire and plug-in.

2: Plug-in to your operating system and to the power source and turn the ‘Switch’ on.

3: Now, go to the ‘Printer Control’ and then, ‘Settings’ to set the following requirements before proceeding:

• Language

  • Time

  • Region

4: Click on ‘Save Changes’ to submit the information.