123.hp.com/setup

123.hp.com/setup
123.hp.com/setup

123.hp.com/setup - Guide to Set up 123 HP printer

Install and download HP Printer driver software for HP printer setup. Before you scanning a documents into your devices with a 123.hp.com/setup scanner, you need to install the printer scanner driver so that your Printer scanner and devices can communicate. Start by connecting the printer setup scanner to your devices with USB port.

HP printer has made the task of printing hassle free and easier. You just need to get done with the 123 hp printer setup to get the most of the device. Simply, install the hp printer on your Windows or Mac computer, install the drivers from 123.hp.com/setup and you are good to go.

Update HP Printer Driver for Windows with Device Manager

  • Go to Device Manager. Expand category “Print Queues” or “Printer” by click the arrow that is point right as seen below.

  • Under this category, right-click on the 123.hp.com/setup printer listed. Click “Search automatically” for updated driver software.

  • After the print driver is installed, restart your computer for the changes to be fully implemented.

Complete the HP Printer Initial Setup using 123 hp com setup

  1. Unbox the printer. Get rid of the packaging materials and take out the device as carefully as possible.

  2. Your printer can withstand physical damage only to an extent, so it is better if you proceed with care.

  3. Once you take the device out, check all the accessories that come along with the package.

  4. Lay them out so it will be easier for you to complete the setup process.

  5. Remove all the covers and tapes on the printer. Remove the filler materials from the cartridge section.

  6. Connect the HP printer to a power source. Make sure the power source is a reliable ad constant.

  7. Once the device turns ON, you can proceed with the setting up of initial preferences like language, time, region, location, etc.

  8. After this, you can install the ink cartridges at the respective section.

  9. You have to open the ink cartridge door to install the ink cartridges.

  10. Strip the tape off of the cartridges and go on to install the ink cartridges in their respective slots.

  11. A click sound will indicate that the ink cartridges are perfectly installed.

  12. Use the paper width guide to adjust the alignment of the stack.

  13. With this, your initial setup of the HP printers is now complete.

  14. You can refer to 123.hp.com/setup in case you have any doubts related to the setup.