Embedded Files
4. Check that you have your 3 categories showing here
5. If you do not, then click on the plus in the upper right and add your categories
5a. Only do this if you do not have categories showing...
5b. Click on Name and add first category
5c. Repeat for the other 2 categories
5d. Press save
6. Click on settings
7. Click on Traditional grade calculations
8. You will see all your classes
9. Click the arrow on a class you teach in the class for your current MP (Not Homeroom)
10. Click the pencil next on right-hand side
11. Now setup your categories in current MP
12. Select arrow
13. Select Category Weighting
14. Select Attribute and select one of the created categories
15. Select the plus to add new and repeat for all categories
16. Add weights for your categories
17. Then select Save Changes.
18. Now copy what you just completed by clicking on the Gear icon.
19. Click on Copy Traditional Grade Calculations
20. Select within a class to copy to the other terms within this class
21. Select class and marking period you just created to copy from
22. Select the period(s) to copy to
23. Click validate at the bottom
24. Verify you have green check marks and press copy (you can ignore the message about unable to copy standards weights)
Now we will copy the setup to your other classes...
25. Click on the Gear icon again at the top-right and choose Copy Traditional Grade Calculations once again.
26. Select same term (i.e. Marking Period 1) and class that you already configured to copy from
27. Select the term (i.e. Marking Period 2) and class(es) to copy to
29. Click validate
30. Check for green checks and press copy
31. Repeat steps 25-30 for each of the other terms to copy to (e.g. Marking periods 3 and 4, where applicable)
You have completed PowerTeacher Pro setup!
Page updated
Report abuse