Flash LED
The inspiration came for this project.
I need a flashlight to help me with vision, and it can also include an addition like a fan, because I often feel hot due to a lot of walking, so I decided this week to make a flashlight with simple components and an easy electrical circuit so that it helps me.
For Electrical Design
Tinkercad Software for designing the electric circuit
Materials :
1- Breadboard and Jumpers to connect the components.
3- 5V Adaptor to power the circuit.
4-Electric Fan.
5- Light blub.
6- 2 ON/OFF switch
8-Crocodial Wires.
and other plastic materials such as bottle ,and, cutter to make the body.
Cutting the plastic bottle.
After cutting the cover, I installed the breadboard with wires:
Fan installed
On/Off Switch of Fan Connected
Light Blub Connected
Test the Light Blub
Switch of Light Blub
Adaptor Connector
All wires connected
Test all functions
Tap the cut parts
This week was completely different for me, because I was with Tim for most of it, away from electricity. In general, we started distributing the work, such as Arabic design, and then electrical connections, and frankly, we learned from each other.
The biggest challenge I faced was that the fan switch was directly above the fan, and this caused me to cut a lot of the cover, but I figured out that by sticking it, I could close this slot.
Unfortunately, I opened a slot, and the switch was adjusted to its size, and I almost solved the challenge.
I will use electronics to measure the percentage of soil moisture. My learning of electronics will provide me with an electrical foundation in the form of an application that will help me in my graduation project.
The best thing about this week was that I worked on the project at the weekend, and I gathered all the children in the family and taught them how to deal with electronics, and they also worked with me on the project with their hands.
We design a small racing car and were defeated
For RC Car Design