1.  Maruthi. Prashanth, Ramesh. S, P. S. Shivakumar. Gouda, Gajanan. M. Naik, Priyaranjan. Sharma, C. Jagadeesh, Mahantesh. M. Math, and Gajanan. Anne, "Impact of ply stacking sequence on the mechanical response of Hybrid Jute-Banana fiber phenoplast composites," , Materials Research Express, vol. 11, pp.055301 May 2024.

2.  Aditya. Kudva, Gajanan. Anne, Ramesh. S, Priyaranjan. Sharma, Jagadeesh, Lingaraj. Ritti, Gajanan Naik, G. Divya. Deepak, ”Enhancing surface characteristics of Mg-Zn-Sr alloy through cryo-ball burnishing; modeling and experimentation,” Journal of Mechanical Science and Technology, vol. 38(3), pp.1175-1185. Jan 2024.

3.  Naik. Gajanan. M, Priyaranjan. Sharma, Gajanan. Anne, Raj. Kumar. Pittala, Rahul. Kumar, Gnane. Swarnadh. Satapathi, Ch. Sateesh. Kumar, and Filipe. Fernandes, "Improvement in Corrosion Performance of ECAPed AZ80/91 Mg Alloys Using SS316 HVOF Coating. Materials, vol. 16 (20),pp. 6651. Oct 2023.

4.  Kumar. Mohan, Vighnesh. Nayak Ullal, Neelakantha. V. Londe, Kaushik Shetty, and Gajanan. M. Naik, “Study on Corrosion Behaviour of Dip Coating of Zinc on Mild Steel,” Journal of Mines, Metals & Fuels, vol. 71, no. 7 July 2023.

5.  Prithivirajan. S, Gajanan. M. Naik, S. Narendranath, and Vijay. Desai, "Recent progress in equal channel angular pressing of magnesium alloys starting from Segal’s idea to advancements till date–A review." International Journal of Lightweight Materials and Manufacture vol. 6 pp. 82-107, March 2022.

6.  Mohanraj. G. T, Sharnappa. Joladarashi, Harish. Hanumanthappa, Bharath. Kumar Shanmugam, Harsha. Vardhan, Gajanan. M. Naik, P. Devadas. Bhat, and M. R. Rahman, "Numerical approach for optimization of magnetic roller and evaluating the performance of permanent magnet roller separator through design of experiment," Alexandria Engineering Journal 61, no. 12, pp. 13011-13033, June 2022.

7.  Roy. Abhinaba, B. Sachin, T. Raghavendra, Charitha M. Rao, Gajanan M. Naik, Hargovind Soni, P. M. Mashinini, and S. Narendranath. "Optimizing machining responses of homologous TiNiCu shape memory alloys using hybrid ANN-GA approach." Materials Today: Proceedings, vol. 62, pp.4402-4410, Jan 2022.

8.  Naik. Gajanan. M, Maheshwar. A. Hipparagi, Sadashiv. Bellubbi, Abhinaba. Roy, B. N. Anjan, S. Ramesh, and S. Narendranath. "A study on dimensional analysis modeling of crater size during wire electrical discharge turning process by using Buckingham Pi theorem," Materials Today: Proceedings,  vol. 66, pp.2093-2097. Jan 2022.

9.  Ramesh. S, H. Shivananda. Nayaka, Gajanan. Anne, M. N. Arun, and Gajanan M. Naik. "Investigation of Tribological Characteristics of Cu-Ti Alloys Processed by Multi-Axial Cryo-Forging," Metallography, Microstructure, and Analysis, vol. 5, pp. 1-10. 2022. 

10.  Gajanan. Manjunath. Naik, Sachin. Bandadka, Anjan. Balija Narasimhamurthy ,Gajanan. Anne, Ramesh. Sampath, “Effect of Die Parameters and Coefficient of Friction on Equivalent Plastic Strain During ECAP: Modeling and Optimization,”  Material International (Accepted for Publication).

11.  Ramesh. Sampath, Gajanan. Anne, Gajanan. Manjunath. Naik, Shamanth. Vasanth, Madhu Sudana Reddy, Fabrication of Mg-Zn/Al and Mg-Zn/Anodized Al Multilayered Composites by Accumulative Roll Bonding, Investigation of Corrosion Behavior Material International, Vol. 4, pp. 102-110, Nov 2022.

12.  Prithivirajan, S., Nyahale, M. B., Naik, G. M., Narendranath, S., Prabhu, A., & Rekha, P. D., “Bio-corrosion impacts on mechanical integrity of ZM21 Mg for orthopaedic implant application processed by equal channel angular pressing,” Journal of Materials Science: Materials in Medicine, vol. 32(6), pp.671. Jan 2021.

13.  Badiger, R. I., Hebbale, A. M., Manjaiah, M., & Naik, G. M, “A Comparative Studyon Characteristics of Inconel-625 Joints Developed through Microwave Hybrid Heating and Tungsten Inert Gas Welding,” Transactions of the Indian Institute of Metals, vol.74, pp.531-540, May 2021.

14.  Sachin, B., Rao, C. M., Naik, G. M., & Puneet, N. P, “Influence of slide burnishing process on the surface characteristics of precipitation hardenable steel,” SN Applied Sciences, vol.3, pp.1-13, April 2021.

15.  Hebbale, A. M., Badiger, R. I., Srinath, M. S., & Naik, G. M, “An experimental investigation of microwave developed nickel-based clads for slurry erosion wear performance using Taguchi approach,” Metallography, Microstructure, and Analysis, vol. 9, pp.293-304, July 2020.

16.  Kulkarni, V. N., Gaitonde, V. N., Nalavade, K. S., Doddamani, M., & Naik, G. M, “Optimization of Wire EDM Process Parameters for Medical Grade Nickel Titanium Shape Memory Alloy,” Strojnícky časopis-Journal of Mechanical Engineering, vol. 70(1),pp. 69-80, March 2020.

17.  Naik, G. M., Narendranath, S., Satheesh Kumar, S. S., & Sahu, S, “Effect of annealing and aging treatment on pitting corrosion resistance of fine-grained Mg-8% Al-0.5% Zn alloy,” JOM, vol. 71, pp. 4758-4768, August 2019.

18.  Naik, G. M., Narendranath, S., & Kumar, S. S, “Effect of ECAP die angles on microstructure mechanical properties and corrosion behavior of AZ80 Mg alloy,” Journal of Materials Engineering and Performance, vol.28, pp. 2610-2619, Sep. 2019.

19.  Naik, G. M., Anjan, B. N., Narendranath, S., & GV, P. K, “Effect of grain refinement on material properties of Mg-8% Al-0.5% Zn alloy after the combined processes of multi-direction forging and equal channel angular pressing,” Materials Research Express, vol. 6(9), pp. 096538, Dec 2019

20.  Naik, G. M., Sannayellappa, N., & Kumar, S. S. S, “Corrosion of ECAPed Magnesium alloys and its background: A review,” Journal of Metals, Materials and Minerals, vo. 29(2), pp.125-150, Dec 2019.

21.  Naik, G. M., Gote, G. D., Narendranath, S., & Kumar, S. S, “Effect of grain refinement on the performance of AZ80 Mg alloys during wear and corrosion,” Advances in Materials Research, vol. 7(2),pp. 105-121, Dec 2018.

22.  Naik, G. M., Gote, G. D., Narendranath, S., & Kumar, S. S, “The impact of homogenization treatment on microstructure microhardness and corrosion behavior of wrought AZ80 magnesium alloys in 3.5 wt% NaCl solution,” Materials Research Express, vol. 5(8), pp. 086513, 2018.

23.  Vishwas, C. J., Gajanan, M. N., Sachin, B., Abhinaba, R., Puneet, N. P., Anjan, B. N., & Vinayak, N. K, “Study on surface roughness in minimum quantity lubrication turning of Al-6082/SiC metal matrix composites,” In Applied Mechanics and Materials, vol. 895, pp. 127-133, 2019.

24.  Naik, G. M., & Narendranath, S, “Optimization of wire-ed turning process parameters by taguchi-grey relational analysis,” J. Mech. Eng, vol. 8, pp. 1-9, 2018.

25.  Gajanan M Naik, Gopal D Gote, Narendranath S, “Magnesium alloys and its Applications: A Short Review,” Journal of Global Engineering Problems & Solutions, vol.5, pp. 23-29, 2017.

26.  Shetty, A. S., Akshar, K. S., Prashanth, B. Y., & Naik, G. M, “Optimization of machining parameters on MRR for EN19 & EN31 steel using Taguchi method,” Int J Emerg Res Manage, vol. 6, pp. 2278-9359, 2017.

27.  Naik, G. M., & Narendranath, S, “A parametric optimization of wire-ED turning process parameters on material removal rate of INCONEL 718,” Journal of Mechanical Engineering and Biomechanics, vol. 2(2), pp. 8-14, 2017.

28.  Gajanan M Naik, Narendranath S, “Effect of machining parameters in wire-electrical discharge turning process: a review,” International Journal of Advanced and Innovative Research, vol. 5, pp. 2278-7844, 2016.

29.  Gajanan M Naik, Narendranath S, “Influence of process parameters on Material Removal Rate in wire electric discharge turning process of INCONEL 718,” International Journals of Advance Research in Science and Engineering (IJARSE), vol. 5, pp. 2319-8354, 2016.

................................................................

.................................................................

Publications-Dr. Gajanan M Naik.