Single Wall Heat Shrink Sleeve W-1-H (RSFR-H) 

Single Wall heat shrinkable tubing is used in the electronics, automotive, military & aerospace sectors in a variety of applications like cable insulation, Mechanical Protection, Strain Relief, Moisture Protection, Marking & Bundling of electronic components.

Zero Halogen, Flexible Heat Shrink Tubing

FEATURES

● Flexible       ● Halogen Free          ● Flame Retardant

● Low smoke generation if burning 

● Continuous Operating Temperature:-45℃ to 125℃

● Shrink Temperature:120℃           ● RoHS Compliant 

● Shrink Ratio    2:1 (50% Shrinkable)

Dual Wall Adhesive Heat Shrink Tube W-1-SB(3X)  

Dual wall heat shrink tubing protects against moisture and corrosive environments, while providing electrical insulation and mechanical protection using engineered adhesives. Dual wall tubing products consist of a crosslinked outer jacket and an inner layer of adhesive or encapsulant. During installation, the adhesive or encapsulant lining melts and flows, creating a moisture-resistant protective barrier. Benefits of this type of tubing include controlled amounts of adhesive and consistent results 

FEATURES

● Shrink Ratio  3:1  ● Longitudinal Shrink 8% Max

● Out Jacket Flame Retardant ● Super Sealing against water, moisture or other contaminants 

● Continuous operating temperature: -45℃~ 125℃

● Shrink temperature: 120 ℃ 

Manufactured from cross linked polyolefin, bus bar are heat shrink tube used to provide insulation protection to busbar in switchgear and substation.

Voltage Class : 1KV, 10KV, 35KV

Available Colors : Red

Other Colours : Black, White, Green, Yellow, Blue

(against order)

FEATURES

● Avoid short circuit fault caused by small animals such as mice, snakes and so on ● Prevent busbar from chemical corrosion effected by strong acid, alkali, salt etc ● Avoid accidental injury to overhaul persons when they enter electriferous clearance by mistakes ● It provides excellent insulation performance to supply required flashover protection for the busbar system 

Heat Shrinkable Anti-Tracking Insulation Tube

Heat Shrink Non Tracking Tubes are used In Medium Voltage Cable Joints and terminations up to 36 KV. The tubes are produced from high quality non tracking cross linked polyolefin material that offers exceptional insulation and long term service reliability. 

FEATURES

● Material: Polyolefin, inner coated with adhesive on the end

● Operating temperature: -55℃～100℃ 

● Shrink temperature: Start at 100℃, and totally at 130℃ 

● Standard Color: RED 

Dielectric breakdown occurs when electrical stress converge over a small area. Stress control tubes are used to distribute electrical stresses at the end of the semi-conducting cable screen, to prevent dielectric break down. The tubes have high permittivity and are suitable for applications up to 36kV. Colour of the tubes is black. 

FEATURES

●  Material: cross-linked polymer   ●  Standard Color: BLACK 

●  Operating temperature: -40℃～100℃ 

● Shrink temperature: Start at 100℃, and totally at 130℃