The Align Array 3 is a network controllable Laser and Inclinometer which attaches directly to an enclosure or fly bar of nearly any line array speaker system. The Align Array 3 is Powered Over Ethernet (PoE), providing operational power as well as allowing for local network access. Each unit is accessible via a user defined IP address making reading the Align Array 3 inclination data as simple as opening a web browser. By using the built-in webpage to access your Align Array 3, you can adjust settings like laser blink speed and laser timeout. The unit can be further customized by accessing the Admin Page via the Management Functions option. The unit’s IP address, Hostname, and Admin Password can all be set from the Admin Page. Additionally, future updates to the device firmware can also be applied from the Admin Page when released. 

• Innovative network design (no additional hardware needed for network access)

• Power over Ethernet or Power from Reader 3

• User defined IP addressable

• Accessible webpage via computer or smart device

• Ultra-high accuracy laser

• Laser blink function offers improved laser observation

• Laser timeout function for increased laser life

• Buttons on unit offer “Laser On” and “Reset” functions

• Inclinometer accurate to one tenth of one degree

• Unit can be mounted in any orientation

• Convenient bolt mounting pattern

• Management Functions – Address Units, Hostname, Update Firmware

•  Optional Stand-Alone Reader (RD3)

Align Array’s powered handheld reader is designed to both power your laser inclinometer as well as report angle and orientation on the LCD display. By directly connecting to the AL3 laser inclinometer using a CAT cable, the RD3 reads/resets the default IP address of the inclinometer, no configuration required. Control blink rate and laser on/off using the soft touch buttons on the front of the Reader 3. Powered by 6 AA batteries for up to 90 minutes of run-time. (Optional AC adaptor available).

• Battery power runs the Reader 3 and one Align Array 3 laser inclinometer

• “On / Off” switch saves batteries when not in use

• “Laser” button to toggle laser on and off

• “Option” button changes laser on steady and laser blink

• Optional AC adaptor for battery-less operation