Products

Isolation Valves

An isolation valve is a valve in a fluid handling system that stops the flow of process media to a given location, usually for maintenance or safety purposes. They can also be used to provide flow logic (selecting one flow path versus another), and to connect external equipment to a system. A valve is classified as an isolation valve because of its intended function in a system, not because of the type of the valve itself. Therefore, many different types of valves can be classified as isolation valves.

Various Types of Isolation Valves We Can Provide

1, Ball Valves

2. Butterfly Valves

3. Diaphragm Valves

4. Gate Valves

5. Pinch Type Valves

6. Piston & Plug Valves

Needle Valves

An instrument needle valve uses a tapered pin to gradually open a space for fine control of flow. The flow can be controlled and regulated with the use of a spindle. A needle valve has a relatively small orifice with a long, tapered seat, and a needle-shaped plunger on the end of a screw, which exactly fits the seat.

Various Types of Needle Valves We Can Provide

2 Way Needle Valve
3 Way Needle Valve
4 Way Needle Valve
Manually operated threaded needle valve.
Motorized Needle Valve: Use an electric or pneumatic actuator for operation.
Angle Needle Valve: Turn the output by 90 degrees instead of in-line.

OD Tube Fittings

Tube fittings connect runs of tubing (for in-line, offset, multi-port, and mounting configurations) to other tubing sections, pipe, hose, or other components. Systems are typically configured with straight sections connected by fittings or specially formed connections and joints.

Various Types of Tube Fittings We Can Provide

OD x OD Union
OD x Threaded Connectors
OD x OD x OD Tee
OD x Threaded Elbow
OD x Socket Weld End
OD x OD x Threaded Tee
OD x OD - 45 Degree Elbow
OD x Threaded - 45 Degree Elbow
Loose Ferrule Fittings
Other Customized OD Fittings

High Pressure OD - Tubes

Round tubing is specified by its actual outside diameter and is equal to the corresponding size. The thickness of tube is defined by a gauge number. Tube size will keep the same OD no matter what the wall thickness is. Tubing also has a tighter manufacturing tolerances than pipe.

Various Types of OD Tubes We Can Provide

Metric Type Stainless Steel - Tubes - This Pipe OD Measure In MM
Imperial Type Stainless Steel - Tubes - This Pipe OD Measure In Inch

Master Shut Off Valves

Master shut-off valves are used in high-pressure compressed gas manifold and piping systems. These valves are used as the main valve for bundles, tube trailers, cylinder filling panels (filling, venting, vacuum) and are available in standard and panel-mounted versions.

Various Makes Are Available As Below

Tekno
Sherwood
Rego
Rotex
Samson
Other Reputed Makes - With Specific Specifications.

Page updated

Report abuse