The schematic will show an interface that can be used to connect to an I/O board.
9/10 reviewers have approved that the cost analysis provides sufficient information on the cost of manufacturing and development of the system.
The system's PCB or schematic must have a 400 pin interface that conforms to the pin layout of the VNX form factor.
The system or 3D modeled system will be secured to an enclosure that will not impede contact with the 400 pin connector.
The system must fit on a board with a length and width (79mm x 89mm) of the VNX form factor standard, or have design documents to illustrate the size constraint.
The height of components on the PCB subsystem must be within 12.5mm on the top and 1.75mm on the bottom, or have design documents to illustrate component sizing.
The FPGA in the system must be connected to on-board memory or the schematic must show the neccessary connections to the memory..
The system must use a switching power supply and a linear power supply.
The system must use the Microsemi MPF300 splash kit as a reference for board components and design.
9/10 reviewers have previewed the completed schematics and have approved the designs for testing and manufacturing.
The system or PolarFire Splash Kit must have at least 2 software demos for device operation approved by the client.
9/10 reviewers have approved that the user guide accurately describes the system and looks professional.