Polymer electrolyte membrane fuel cells (PEMFCs) and water electrolyzers are key hydrogen technologies, but electrode materials still limit their cost and lifetime. Both rely on expensive, scarce precious metals: Pt for the oxygen reduction reaction (ORR) in fuel cells and Ir for the oxygen evolution reaction (OER) in electrolyzers. Carbon catalyst supports also corrode at high potentials. Our group designs catalyst and support materials that address these problems and develops diagnostics that track electrode degradation during operation.
Durable oxide catalyst supports. Corrosion of carbon supports causes Pt particles to detach and agglomerate. As a replacement, we developed conductive titanium and niobium suboxides doped with Si, Mo, or both. These supports resist corrosion far better than carbon and bind Pt strongly (strong metal–support interaction), which stabilizes the particles and can improve activity. Our Pt/TOMS catalysts remained exceptionally durable under accelerated stress testing. This work has led to two patents, and the technology is available for licensing through Ontario Tech.
Reducing precious-metal use. We also develop doped metal oxides as platinum-group-metal-free (PGM-free) electrocatalysts. Ni- and Cu-doped titanium suboxide is active and durable for the ORR, and it is bifunctional for both oxygen reduction and evolution. Separately, we build well-defined M–N₃ sites on carbon from terpyridine metal complexes and use them as model systems to study how the carbon support affects PGM-free ORR activity. Durable oxide catalyst supports. Corrosion of carbon supports causes Pt particles to detach and agglomerate. As a replacement, we developed conductive titanium and niobium suboxides doped with Si, Mo, or both. These supports resist corrosion far better than carbon and bind Pt strongly (strong metal–support interaction), which stabilizes the particles and can improve activity. Our Pt/TOMS catalysts remained exceptionally durable under accelerated stress testing. This work has led to two patents, and the technology is available for licensing through Ontario Tech.
Alcohol oxidation. Doped metal oxide supports also enhance methanol and ethanol oxidation at Pt, which matters for direct alcohol fuel cells, electrolysis cells and our fuel-cell-based breath alcohol sensors (see Sensors).
Seeing degradation as it happens. We developed in situ impedance methods that follow catalyst-layer properties, such as ionic resistance and capacitance, during operation and stress testing. They show how and why a membrane electrode assembly fails without post-mortem analysis.
Capabilities: MEA fabrication and single-cell fuel cell testing; RDE; EIS; accelerated stress testing; XPS, TEM, SEM, XRD, Raman, BET and TG-MS characterization.
Recent highlights:
Catal. Sci. Technol. (2026, front cover): bifunctional ORR/OER catalysts made from Ni/Cu-doped titanium suboxide (doi:10.1039/D6CY00533K)
Curr. Opin. Electrochem. (2024): review of ethanol oxidation electrocatalysts (doi:10.1016/j.coelec.2024.101553)
Electrochim. Acta (2023): a doped metal oxide PGM-free ORR catalyst (doi:10.1016/j.electacta.2022.141564)
Electrochim. Acta (2022): nitrogen-ligand-functionalized carbons for fuel cells and supercapacitors (doi:10.1016/j.electacta.2022.140209)
Full list on the Publications page.