Patel, U.K., Alom, N., and Saha, U. K. 2023. Aerodynamic Analysis of a 2-stage elliptical-bladed Savonius Wind rotor: Numerical simulation and experimental validation", International Journal of Green Energy, vol.20, Issue 7.
Mohan, M., Alom, N., and Saha, U. K. 2023. Role of Optimization and Soft-computing Techniques in the Design and Development of Futuristic Savonius Wind Turbine Blades: A Review", Wind Engineering, vol.47, issue. 3, page 722-744.
Sarkar, D., Shukla, S., Alom, N., Sharma, P., and Bora, B. J., 2022. Investigation of a Newly Developed Slotted Bladed Darrieus Vertical Axis Wind Turbine: A Numerical and Response Surface Methodology Analysis, ASME Journal of Energy Resources Technology, Vol: 145, No:5, p: 051302
Shukla A., Alom, N., and Saha, U. K., 2022. Spline-Bladed Savonius Wind Rotor with Porous Deflector: A Computational Investigation, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol: 44, issue: 10, p:1-17
Talukdar, P. K., Alom, N., Rathod, U. H, and Kulkarni, V., 2021. Alternative Blade Profile based on Savonius Concept for Effective Wind Energy, ASME Journal of Energy Resources Technology, Vol.144, No: 4, p:041304
Alom, N., Saha, U. K., and Dewan, A., 2021. In the Quest of an Appropriate Turbulence Model for Analyzing the Aerodynamics of a Conventional Savonius (S-type) Wind Rotor, Journal of Renewable and Sustainable Energy, Vol. 13, issue 2, p. 023313
Alom, N., 2021. Influence of Curtain Plates on the Aerodynamic Performance of an Elliptical Bladed Savonius Rotor (S-rotor), Energy Systems, Vol.13, issue. 2, pages: 1-16 (Scopus)
Alom, N., and Saha, U. K., 2019. Examining the aerodynamic drag and lift characteristics of a newly developed elliptical- bladed Savonius rotor, ASME Journal of Energy Resources Technology, Vol. 141, No. 5, p. 051201.
Alom, N., and Saha, U. K., 2019. Evolution and progress in the development of Savonius wind turbine rotor blade profiles and shapes, ASME Journal of Solar Energy Engineering, Vol. 141, No.3, p. 030801.
Alom, N., and Saha, U. K., 2019. Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation, Energy Conversion and Management, Vol. 186, pp: 267-277
Alom, N., and Saha, U. K., 2019. Drag and lift characteristics of a novel elliptical-bladed Savonius rotor with vent augmenters, ASME Journal of Solar Energy Engineering, Vol. 141, No. 5, p. 051007.
Ranjan, R. K., Alom, N., Singh, J., and Sarkar, B. K., 2019, “Performance investigations of cross flow hydro turbine with the variation of blade and nozzle entry arc angle ” Energy Conversion and Management, Vol. 182, pp.41–50
Alom N, P.K. Talukdar, B.K. Sarkar, and Saha U. K., 2023. Influence of Concentrated Augmenter on the Performance of A Two-Bladed Savonius Wind Rotor Composed of Arc-Elliptical Profile, Paper No. GTIndia2023-118292, ASME Gas Turbine India Conference, December 07 – 08, Bangalore, India (accepted).
Baruah, J., Venkaiah, P., Kumar, N., Sarkar, B.K. and Alom, N., 2022 Offshore Wind Turbine Pitch Control with Aeroelastic Effect, IEEE IAS Global Conference on Emerging Technologies (GlobConET), May 20-22, 2022, Virtual
Shukla, S., Bora, B.J., Deo, A., Alom, N., 2022, Numerical Analysis of Vertical Axis Wind Turbine Blades in ANSYS Fluent, Materials Today Proceedings, Vol: 59, part: 3, p: 1781-1785
Alom N., and Sarkar B.K., 2021. Effect of Exit Blade Angle on the Performance of Cross Flow Hydro Turbine: A Numerical Study, Paper No. GTIndia2021-76037, ASME Gas Turbine India Conference, December 02 – 03, Virtual, online
CJ Ramana, Bora BJ, Roy S, Alom N, and Buradi A, 2021, CFD Analysis of Pressure and Velocity distribution in Novel Reverse Osmosis Filtration of Crude Biodiesel, Proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 27-29, 2021, BITS Pilani, Pilani Campus, RJ, India
Singh J., Alom N., and Sarkar B.K., 2020. Computational assessment of cross flow hydro turbine by changing the rotational speed, Proceedings of the 8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP2020), December 09-11, 2020, IIT Guwahati, Guwahati-781039, Assam, India
Alom N, and Saha U. K., 2019. Determining the optimal location of vent augmenters in an elliptical-bladed Savonius rotor, Paper No. GTIndia2019-2344, ASME Gas Turbine India Conference, December 05 – 06, IIT Madras, Chennai, India.
Alom N, Das R, and Saha U. K., 2019. Optimization of aerodynamic parameters of an elliptical-Bladed Savonius wind rotor using multi-objective genetic algorithm, Paper No. GTIndia2019-2346, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.
Alom N, Das R, and Saha U. K., 2019. A Differential Evolution-Based Inverse Method to Optimize Blade Configurations in Elliptical-Bladed Savonius Wind Turbines, Paper No. GTIndia2019-2352, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.
Alom, N., Kumar, N., and Saha, U. K., 2019. Analyzing the effect of shaft and end-plates of a newly developed elliptical-bladed Savonius rotor from wind tunnel tests, Paper No. OMAE2019-95570, ASME 38th International Conference on Ocean, Offshore and Arctic Engineering, June 9-14, 2019, Glasgow, Scotland, UK.
Alom, N., and Saha, U. K., 2017. Arriving at the optimum overlap ratio for an elliptical-bladed Savonius rotor, Paper No. GT2017-64137, ASME Turbo Expo, June 26–30, Charlotte, North Carolina, USA.
Alom, N., Kumar, N., and Saha, U. K., 2017. Aerodynamic performance of an elliptical-bladed Savonius rotor under the influence of number of blades and shaft, Paper No. GTIndia2017-4554, ASME Gas Turbine India Conference, December 7–8, Bangalore, India.
Alom N., Kolaprathi S.C., Gadde S.C., and Saha U.K., 2016, “Aerodynamic design optimization of elliptical-bladed Savonius-style wind turbine by numerical simulations”, Paper No. OMAE2016-55095, ASME 35th International Conference on Ocean, Offshore and Arctic Engineering, June 19-24, Busan, South Korea.
Alom, N., and Saha, U.K., 2016. Numerical optimization of semicircular-bladed Savonius rotor using vent augmenters, Asian Congress on Gas Turbines 2016, November 14-16, IIT Bombay, Mumbai, India
On ‘ANSYS and Its Application in Engineering’ Department of Mechanical Engineering, GIMT Guwahati, Assam, India, 5-9 June 2017.
On the topic of ‘Problem Solving Approaches Using CFD Tools’ in 5th National Workshop on Research Methodology in Fluid Mechanics, Jointly Organized by Department of Mechanical Engineering, IIT Guwahati & National Society of Fluid Mechanics and Fluid Power, India, held at IIT Guwahati during June 22-23, 2019.
On ‘Use of CFD Tools’ Department of Mechanical Engineering, IIT Guwahati, Assam, India, 17-21 February 2021
On the topic of Computational Analysis of Various Savonius Rotor Blade Profiles in the Refresher Program on Small Wind Turbines: Design, Development and Testing organized by Trinity College of Engineering and Research, Pune during 31st March-6th April 2021
On the topic of Evolution of Vertical Axis Wind Turbines and Its Applications in the STTP on Recent Developments in Renewable Energy organized by Government Engineering College Bharuch, Gujrat during 4-9th April 2021
On the topic of Experimental Analysis of Savonius Wind Rotors in the Refresher Program on Small Wind Turbines: Design, Development and Testing phase-II organized by Trinity College of Engineering and Research, Pune during 28th April-4th May 2021
On the topic of Computational Analysis of Cross Flow Hydro Turbine with the Variation of Blade and Nozzle Entry Arc Angle in the 2nd International Workshop on In-stream Hydrokinetic organized at the Department of Hydro and Renewable Energy (HRED), IIT Roorkee, during Sept.27-28, 2021.
